Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.
Calculating the maximum obstacle-crossing ability accurately at the mechanism design stage can better ensure that the manufactured robot prototype meets the predefined indices. The obstacle-crossing task of the legged robot is achieved by the collaborative movement of the leg and body. The reachable workspace constrains the spatial movement boundary of the foot tip and the robot body. The reachable workspace of the foot tip is invariant, while the shape and volume of the reachable body workspace vary with the supporting footholds. In this study, the body movement is modeled as a six-bar mechanism, and the reachable body workspace means the reachable region of the specified target point located on the moving platform of the six-bar mechanism. Unlike the previous work, the analytical method of calculating the reachable workspace for the target point outside the moving platform, named the external target point, is further studied. The influence of supporting footholds and shank-ground interference on the reachable body workspace is considered. The selection of supporting footholds, the collaborative motion sequences of the robot body and legs, and the determination of the maximum ability for crossing a ditch and climbing a step are demonstrated as cases of implementing the analytical reachable body workspace for the internal target point and the external target point, respectively. Finally, simulations verify the correctness of the theoretical analysis.
Legged soccer robots present a significant challenge in robotics owing to the need for seamless integration of perception, manipulation, and dynamic movement. While existing models often depend on external perception or static techniques, our study aims to develop a robot with dynamic and untethered capabilities. We have introduced a motion planner that allows the robot to excel in dynamic shooting and dribbling. Initially, it identifies and predicts the position of the ball using a rolling model. The robot then pursues the ball, using a novel optimization-based cycle planner, continuously adjusting its gait cycle. This enables the robot to kick without stopping its forward motion near the ball. Each leg is assigned a specific role (stance, swing, pre-kick, or kick), as determined by a gait scheduler. Different leg controllers were used for tailored tiptoe trajectory planning and control. We validated our approach using real-world penalty shot experiments (5 out of 12 successful), cycle adjustment tests (11 out of 12 successful), and dynamic dribbling assessments. The results demonstrate that legged robots can overcome onboard capability limitations and achieve dynamic mobility and manipulation.