The ship floating raft system adopts the integrated design of large liquid tanks and rafts, which can optimize the arrangement in the cabin and increase the intermediate mass of the system to achieve efficient vibration isolation of equipment. One of the major challenges is that the change of liquid mass in the tank will cause displacement of the raft, which will change the modal characteristics of the system and affect the stability of the vibration isolation system performance. This paper establishes a mechanical analysis model of a floating raft system under time-varying liquid mass conditions. Taking a ship variable mass floating raft system as the research object, the effect of mass change on the characteristics of raft displacement, isolator load distribution, and modal frequency of the vibration isolation system is analyzed. The analysis shows that when the liquid tank goes from full load to no-load state, its mass change accounts for 40% of the total mass of the raft, which will cause a large displacement of the raft and change the low order modal frequency of the system, bringing the risk of equipment safety and vibration isolation performance degradation. Therefore, an adaptive variable load control method is proposed to realize the raft attitude balance and load equalization optimization under the variable mass condition of the floating raft air spring system. The test results show that the proposed control method can automatically adapt to the large mass gradual change from full load to no load of the liquid tank on the raft, and control the displacement of the raft structure from about 10 mm to 1.5 mm, which effectively ensures the stability of the air spring system performance.
In order to improve the alignment stability of the air vibration isolation device of a high-powered main engine, we established a mechanical model for the air vibration isolation system and analyzed the alignment deviation of the device and the vibration decoupling conditions of the system. Additionally, an optimized design method for the dual-direction support of the air vibration isolators positioned symmetrically on the main engine was proposed. The resultant design showed that when compared to the conventional inclined support of air springs for the main engines onboard ships, the dual-direction support design proposed in this paper for air vibration isolation could eliminate the adverse effect of the output torque reaction on the alignment of the main engine and decouple the system to reduce the number of peaks in the frequency response of vertical force transmission. The optimized design could effectively improve the alignment performance of the device for tilted or swinging operating conditions and maintain the good alignment stability of the device when a single vertical support air spring fails. A single vertical support air spring failure mainly affects the stability of the main engine under the reaction of the output torque, especially the air springs arranged in the corner, while the air springs arranged in the middle have no effect. The optimized design could also improve the vibration isolation performance. This is important for the design of air spring vibration isolation devices for high power density main engines.
The alignment stability and controllability deteriorate considerably when the air spring vibration isolation system for the high power density main engine (HPDME-ASVIS) is in a special running state of high power and high output torque. The coupling characteristics among the alignment components are obtained by analyzing the mechanical characteristics of HPDME-ASVIS. A control response model is established, which can predict the alignment state and the vertical displacement of air springs after k times of inflation/deflation. By solving the linear programming problem, the alignment controllability judgment models are constructed for two conditions, which are under hard constraints and soft constraints, respectively. Furthermore, alignment reconfigurability is described and an autonomous control method is established. The experimental results confirm that high output torque will cause large and serious coupling of horizontal offset, self-rotation angle, and vertical deformation of air springs. Meanwhile, hey cannot reach the given control precision range. The traditional control method under hard constraints will result in a state of oscillation and may bring many reliability problems to HPDME-ASVIS. The alignment reconfigurability analysis can judge the alignment control influence degree based on different torque accurately. The autonomous control can use the control parameters autonomous adjustment and the spatial configuration to realize the alignment control reconfigurability for two different alignment control fault states. The stability of the alignment control system in HPDME-ASVIS can be improved observably, which is of great significance to the engineering application of the high power density main engine (HPDME) in the field of marine propulsion technology.