Due to climate change, soil moisture may increase, and outflows could become more frequent, which will have a considerable impact on crop growth. Crops are affected by soil moisture; thus, soil moisture prediction is necessary for irrigating at an appropriate time according to weather changes. Therefore, the aim of this study is to develop a future soil moisture (SM) prediction model to determine whether to conduct irrigation according to changes in soil moisture due to weather conditions. Sensors were used to measure soil moisture and soil temperature at a depth of 10 cm, 20 cm, and 30 cm from the topsoil. The combination of optimal variables was investigated using soil moisture and soil temperature at depths between 10 cm and 30 cm and weather data as input variables. The recurrent neural network long short-term memory (RNN-LSTM) models for predicting SM was developed using time series data. The loss and the coefficient of determination (R²) values were used as indicators for evaluating the model performance and two verification datasets were used to test various conditions. The best model performance for 10 cm depth was an R² of 0.999, a loss of 0.022, and a validation loss of 0.105, and the best results for 20 cm and 30 cm depths were an R² of 0.999, a loss of 0.016, and a validation loss of 0.098 and an R² of 0.956, a loss of 0.057, and a validation loss of 2.883, respectively. The RNN-LSTM model was used to confirm the SM predictability in soybean arable land and could be applied to supply the appropriate moisture needed for crop growth. The results of this study show that a soil moisture prediction model based on time-series weather data can help determine the appropriate amount of irrigation required for crop cultivation.

In this study, conventional machine learning and deep leaning approaches were evaluated using X-ray imaging techniques for investigating the internal parameters (endosperm and air space) of three cultivars of watermelon seed. In the conventional machine learning, six types of image features were extracted after applying different types of image preprocessing, such as image intensity and contrast enhancement, and noise reduction. The sequential forward selection (SFS) method and Fisher objective function were used as the search strategy and feature optimization. Three classifiers were tested (linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), and k-nearest neighbors algorithm (KNN)) to find the best performer. On the other hand, in the transfer learning (deep learning) approaches, simple ConvNet, AlexNet, VGG-19, ResNet-50, and ResNet-101 were used to train the dataset and class prediction of the seed. For the supervised model development (both conventional machine learning and deep learning), the germination test results of the samples were used where the seeds were divided into two classes: (1) normal viable seeds and (2) nonviable and abnormal viable seeds. In the conventional classification, 83.6% accuracy was obtained by LDA using 48 features. ResNet-50 performed better than other transfer learning architectures, with an 87.3% accuracy which was the highest accuracy in all classification models. The findings of this study manifested that transfer learning is a constructive strategy for classifying seeds by analyzing their morphology, where X-ray imaging can be adopted as a potential imaging technique.

Citrus fruits were sorted based on external qualities, such as size, weight, and color, and internal qualities, such as soluble solid content (SSC), acidity, and firmness. Visible and near-infrared (VNIR) hyperspectral imaging techniques were used as rapid and nondestructive techniques for determining the internal quality of fruits. The applicability of the VNIR hyperspectral imaging technique for predicting the SSC in citrus fruits was evaluated in this study. A VNIR hyperspectral imaging system with a wavelength range of 400–1000 nm and 100 W light source was used to acquire hyperspectral images from citrus fruits in two orientations (i.e., stem and calyx ends). The SSC prediction model was developed using partial least-squares regression (PLSR). Spectrum preprocessing, effective wavelength selection through competitive adaptive reweighted sampling (CARS), and outlier detection were used to improve the model performance. The performance of each model was evaluated using the coefficient of determination (R²) and root mean square error (RMSE). In the present study, the PLSR model was developed using only a citrus cultivar. The SSC prediction CARS-PLSR model with outliers removed exhibited R² and RMSE values of approximatively 0.75 and 0.56 °Brix, respectively. The results of this study are expected to be useful in similar fields such as agricultural and food post-harvest management, as well as in the development of an online system for determining the SSC of citrus fruits.

Physical stimuli-responsive DNA hydrogels hold immense potential for tissue engineering due to their inherent biocompatibility, tunable properties, and capacity to replicate the mechanical environment of natural tissue, making physical stimuli-responsive DNA hydrogels a promising candidate for tissue engineering. These hydrogels can be tailored to respond to specific physical triggers such as temperature, light, magnetic fields, ultrasound, mechanical force, and electrical stimuli, allowing precise control over their behavior. By mimicking the extracellular matrix (ECM), DNA hydrogels provide structural support, biomechanical cues, and cell signaling essential for tissue regeneration. This article explores various physical stimuli and their incorporation into DNA hydrogels, including DNA self-assembly and hybrid DNA hydrogel methods. The aim is to demonstrate how DNA hydrogels, in conjunction with other biomolecules and the ECM environment, generate dynamic scaffolds that respond to physical stimuli to facilitate tissue regeneration. We investigate the most recent developments in cancer therapies, including injectable DNA hydrogel for bone regeneration, personalized scaffolds, and dynamic culture models for drug discovery. The study concludes by delineating the remaining obstacles and potential future orientations in the optimization of DNA hydrogel design for the regeneration and reconstruction of tissue. It also addresses strategies for surmounting current challenges and incorporating more sophisticated technologies, thereby facilitating the clinical translation of these innovative hydrogels.

A Tungsten-Halogen (TH) lamp is the most popular light source in NIR spectroscopy and hyperspectral imaging, which requires a warm-up to reach very high temperatures of up to 250 °C and take a long time for radiation stabilization. Consequently, it has a large enough volume to enable heat dissipation to prevent the thermal runaway of the electric circuit and turn out its power efficiency very low. These are major barriers for miniaturizing spectral systems and hyperspectral imaging devices. However, TH lamps can be replaced by pc-NIR LEDs in order to avoid high temperature and large volume. We compared the spectral emission of the available commercial pc-NIR LEDs under the same condition. As a replacement for the TH lamp, the VIS + NIR LED module was developed to combine a warm-white LED and pc-NIR LEDs. In order to feature out the availability of the VIS + NIR LED module against the TH lamp, they were used as the light source for evaluating the Soluble Solid Content (SSC) of an apple through VIS-NIR spectroscopy. The results show a remarkable feasibility in the performance of the partial least square (PLS) model using the VIS + NIR LED module; during PLS calibration, the correlation coefficient (R) values are 0.664 and 0.701, and the Mean Square Error (MSE) values are 0.681 and 0.602 for the TH lamp and VIS + NIR LED module, respectively. In VIS-NIR spectroscopy, this study indicates that the TH lamp could be replaceable with a warm-white LED and pc-NIR LEDs.