The high dielectric constant ZrO2, as one of the most promising gate dielectric materials for next generation semiconductor device, is expected to be introduced as a new high k dielectric layer to replace the traditional SiO2 gate dielectric. The electrical properties of ZrO2 films prepared by various deposition methods and the main methods to improve their electrical properties are introduced, including doping of nonmetal elements, metal doping design of pseudo-binary alloy system, new stacking structure, coupling with organic materials and utilization of crystalline ZrO2 as well as optimization of low-temperature solution process. The applications of ZrO2 and its composite thin film materials in metal oxide semiconductor field effect transistor (MOSFET) and thin film transistors (TFTs) with low power consumption and high performance are prospected.
Aluminum-doped ZnO (AZO) has huge prospects in the field of conductive electrodes, due to its low price, high transparency, and pro-environment. However, enhancing the conductivity of AZO and realizing ohmic contact between the semiconductor and AZO source/drain (S/D) electrodes without thermal annealing remains a challenge. Here, an approach called pulsed laser deposition (PLD) is reported to improve the comprehensive quality of AZO films due to the high energy of the laser and non-existence of the ion damage. The 80-nm-thick AZO S/D electrodes show remarkable optical properties (transparency: 90.43%, optical band gap: 3.42 eV), good electrical properties (resistivity: 16 × 10−4 Ω·cm, hall mobility: 3.47 cm2/V·s, carrier concentration: 9.77 × 1020 cm−3), and superior surface roughness (Rq = 1.15 nm with scanning area of 5 × 5 μm2). More significantly, their corresponding thin film transistor (TFT) with low contact resistance (RSD = 0.3 MΩ) exhibits excellent performance with a saturation mobility (µsat) of 8.59 cm2/V·s, an Ion/Ioff ratio of 4.13 × 106, a subthreshold swing (SS) of 0.435 V/decade, as well as good stability under PBS/NBS. Furthermore, the average transparency of the unpatterned multi-films composing this transparent TFT can reach 78.5%. The fabrication of this TFT can be suitably transferred to transparent arrays or flexible substrates, which is in line with the trend of display development.
Inkjet-printed top-gate metal oxide (MO) thin-film transistors (TFTs) with InGaSnO semiconductor layer and carbon-free aqueous gate dielectric ink are demonstrated. It is found that the InGaO semiconductor layer without Sn doping is seriously damaged after printing aqueous gate dielectric ink onto it. By doping Sn into InGaO, the acid resistance is enhanced. As a result, the printed InGaSnO semiconductor layer is almost not affected during printing the following gate dielectric layer. The TFTs based on the InGaSnO semiconductor layer exhibit higher mobility, less hysteresis, and better stability compared to those based on InGaO semiconductor layer. To the best of our knowledge, it is for the first time to investigate the interface chemical corrosivity of inkjet-printed MO-TFTs. It paves a way to overcome the solvent etching problems for the printed TFTs.
1 May 2021 in Chinese Journal of Liquid Crystals and Displays