The advantage of mechanical metamaterials is that the properties can be improved at the macro level through reasonable artificial design at the micro level. Mechanical metamaterials are applied to solve the problems of vibration and noise in engineering applications. In this paper, a creative chiral star-shaped compositive mechanical metamaterial (CSCMM) is proposed by combining the chiral lattice structure and star-shaped honeycomb. The generation mechanism of the bandgap and the impaction of structural parameters are studied to obtain the low-frequency bandgap by single-phase materials. On this basis, the influence of star angle on bandgap generation and the variation of structure vibration mode during bandgap generation are studied. In addition, the phase and group velocities of elastic waves in chiral star-shaped compositive mechanical metamaterial are studied. Finally, the frequency response function (FRF) of the elastic wave propagating in the structure is calculated, and the result is consistent with the band diagram. Therefore, the design method of compositive mechanical metamaterial can effectively realize the improvement of property and reduce the attenuation of elastic waves, and it provides a new design idea for the vibration and noise reduction design of metamaterial.

In order to achieve the dual needs of single-phase vibration reduction and lightweight, a square honeycomb acoustic metamaterials with local resonant Archimedean spirals (SHAMLRAS) is proposed. The independent geometry parameters of SHAMLRAS structures are acquired by changing the spiral control equation. The mechanism of low-frequency bandgap generation and the directional attenuation mechanism of in-plane elastic waves are both explored through mode shapes, dispersion surfaces, and group velocities. Meanwhile, the effect of the spiral arrangement and the adjustment of the equation parameters on the width and position of the low-frequency bandgap are discussed separately. In addition, a rational period design of the SHAMLRAS plate structure is used to analyze the filtering performance with transmission loss experiments and numerical simulations. The results show that the design of acoustic metamaterials with multiple Archimedean spirals has good local resonance properties, and forms multiple low-frequency bandgaps below 500 Hz by reasonable parameter control. The spectrograms calculated from the excitation and response data of acceleration sensors are found to be in good agreement with the band structure. The work provides effective design ideas and a low-cost solution for low-frequency noise and vibration control in the aeronautic and astronautic industries.

The synthesized understanding of the mechanical properties of negative Poisson’s ratio (NPR) convex–concave honeycomb tubes (CCHTs) under quasi-static and dynamic compression loads is of great significance for their multifunctional applications in mechanical, aerospace, aircraft, and biomedical fields. In this paper, the quasi-static and dynamic compression tests of three kinds of 3D-printed NPR convex–concave honeycomb tubes are carried out. The sinusoidal honeycomb wall with equal mass is used to replace the cell wall structure of the conventional square honeycomb tube (CSHT). The influence of geometric morphology on the elastic modulus, peak force, energy absorption, and damage mode of the tube was discussed. The experimental results show that the NPR, peak force, failure mode, and energy absorption of CCHTs can be adjusted by changing the geometric topology of the sinusoidal element. Through the reasonable design of NPR, compared with the equal mass CSHTs, CCHTs could have the comprehensive advantages of relatively high stiffness and strength, enhanced energy absorption, and damage resistance. The results of this paper are expected to be meaningful for the optimization design of tubular structures widely used in mechanical, aerospace, vehicle, biomedical engineering, etc.

The two circular structures with local resonance resonant hammers proposed in this paper have the comprehensive performance of small size, easy fabrication and low frequency vibration and sound damping. In the study, Bloch’s theorem is used to calculate the energy band curves of the two structures and to analyze the vibration forms of the structures at the edge of the band gap. At the same time, the integrated analysis means of phase constant surface, group velocity and phase velocity are innovatively used to explore the real propagation path of waves and provide experience for topology optimization. The position of resonant hammers, the mirror symmetry structure and the size of resonant hammers are adjusted to optimize the band gap for both structures. Finally, the vibration transmission characteristics of the finite period structure are calculated to verify the band gap and evaluate the vibration isolation performance. The results show that the new structure has low-frequency noise reduction performance, and the band gap frequency can be further reduced by topology optimization. This study presents an innovative approach for achieving low-frequency noise reduction, analysis of wave propagation paths and lightweight design.