Point clouds registration is an important step for laser scanner data processing, and there have been numerous methods. However, the existing methods often suffer from low accuracy and low speed when registering large point clouds. To meet this challenge, an improved iterative closest point (ICP) algorithm combining random sample consensus (RANSAC) algorithm, intrinsic shape signatures (ISS), and 3D shape context (3DSC) is proposed. The proposed method firstly uses voxel grid filter for down-sampling. Next, the feature points are extracted by the ISS algorithm and described by the 3DSC. Afterwards, the ISS-3DSC features are used for rough registration with the RANSAC algorithm. Finally, the ICP algorithm is used for accurate registration. The experimental results show that the proposed algorithm has faster registration speed than the compared algorithms, while maintaining high registration accuracy.
Silicon-based Lidar is an ideal way to reduce the volume of the Lidar and realize monolithic integration. It removes the moving parts in the conventional device and realizes solid-state beam steering. The advantages of low cost, small size, and high beam steering speed have attracted the attention of many researchers. In order to facilitate researchers to quickly understand the research progress and direction, this paper mainly describes the research progress of silicon-based integrated Lidar, including silicon-based optical phased array Lidar, silicon-based optical switch array Lidar, and continuous frequency-modulated wave Lidar. In addition, we also introduced the scanning modes and working principles of other kinds of Lidar, such as the Micro-Electro-Mechanical System, mechanical Lidar, etc., and analyzed the characteristics of the Lidars above. Finally, we summarized this paper and put forward the future expectations of silicon-based integrated Lidar.
Single-pixel imaging is a novel imaging technique that can obtain image information through a single-pixel detector. It can effectively avoid the problem of lack of high-quality area array detectors in the terahertz band, and has attracted the attention of a large number of researchers in recent years. In this paper, the basic imaging principles, terahertz beam modulation methods and typical image reconstruction algorithms for terahertz single-pixel imaging are introduced and discussed, as well as its research progresses and developing trends.
Acousto-optic devices represented by acousto-optic tunable filters (AOTFs), have the advantages of wide wavelength range from the ultraviolet to the long-wave infrared and fast wavelength switching speed. Nowadays, acousto-optic spectral systems have become very important scientific instruments in laboratory. There are many factors to be considered when we choose different solutions for acousto-optic spectral systems, but there is no comprehensive analysis and summary of them. This paper explains the working principle of the acousto-optic devices and summarizes the most common optical schemes for acousto-optic spectral systems. We also analyzed their characteristics of application conditions. In addition, specific applications of acousto-optic spectral systems in some common fields are presented.
MEMS-based LIDAR has the advantages of fast-scanning, simple structure, small volume, and light weight, which make it a hot topic for 3D imaging. In order to overcome the limited scanning angle of the current MEMS mirrors, a large angle MEMS-based optical scanning system was designed using telephoto structure. In this design an f-θ lens group is used for flat field scanning and a symmetrical cemented lens group is used for angle expansion. The principle of this system is discussed in detail and an optical design is implemented by ZEMAX software. The designed system realized a scanning angle as large as 57° and is in excellent linear relation with the tilt angle of the MEMS mirror. At the target distance of 100 m, the maximum RMS radius of the light spot is only 7 cm. This optical scanning system shows a significant application potentiality for 3D imaging LIDAR.
Optical neural networks can effectively address hardware constraints and parallel computing efficiency issues inherent in electronic neural networks. However, the inability to implement convolutional neural networks at the all-optical level remains a hurdle. In this work, we propose an optical diffractive convolutional neural network (ODCNN) that is capable of performing image processing tasks in computer vision at the speed of light. We explore the application of the 4f system and the diffractive deep neural network (DNN) in neural networks. ODCNN is then simulated by combining the 4f system as an optical convolutional layer and the diffractive networks. We also examine the potential impact of nonlinear optical materials on this network. Numerical simulation results show that the addition of convolutional layers and nonlinear functions improves the classification accuracy of the network. We believe that the proposed ODCNN model can be the basic architecture for building optical convolutional networks.