Based on the soil arching effect theory, the magnitude and distribution of sidewall earth pressure on open caissons when the embedded depth is large was analyzed by using theory of non-limit state earth pressure theory and horizontal differential element method. The theoretical formula was deduced. The theoretical calculation results are compared with the field test results and centrifugal model test results respectively. The results show that when the embedded depth of the open caisson is large, the distribution of earth pressure on the side wall of the open caisson first increases with the increase of embedded depth, reaches a peak value, and then sharply decreases. The peak point is located at 2/3 ~ 4/5 of the embedded depth. In engineering practice, when the embedded depth of the open caisson is 40 m, the relative error between the field test value and the theoretical calculation value is − 55.8% ~ 1.2%, with an average error of 13.8%. When the equivalent embedded depth of the open caisson in the centrifugal model test is 36 m, the relative error between the centrifugal model test value and the theoretical calculation value is − 20.1% ~ 68.0%, with an average error of 10.6%, The results are consistent well. The results of this article provides reference for the design and construction of open caisson.

In order to study the disintegration characteristics of red clay under different moisture content and temperature, red clay taken from Guilin was prepared into samples with different moisture content, and the disintegration test of red clay was carried out by self-made test equipment. Considering the influence of water absorption and weight gain in red clay, a parallel water absorption test was carried out for each disintegration test, and the disintegration amount–time relationship curve was corrected with the results of the water absorption test so as to propose a new disintegration amount calculation formula. In this experiment, the disintegration characteristics of red clay under different moisture content and temperature were investigated. The experimental results show that the disintegration amount decreases with the increase in moisture content, the moisture content exceeds 25%, and the red clay basically does not disintegrate within 2 h. The amount of disintegration increases with increasing temperature, but the disintegration of red clay in natural environments is not sensitive to temperature. The comprehensive analysis of moisture content and temperature shows that in the natural climate range, moisture content is the main influencing factor of soil disintegration.

The performance indicators of concrete are mainly determined by the interface characteristics between cement hydration slurry and aggregates. In this study, molecular dynamics technology was used to evaluate the effect of the interfacial water content on the evolution of the interface structure, interaction energy, and mechanical properties of calcium silicate hydrate (C-S-H) and silicon dioxide (SiO₂) systems, and the weakening mechanism of the C-S-H/SiO₂ interface in a humid environment was revealed. The results showed that all stress–strain curves of C-S-H/SiO₂ were divided into the elastic stage and the failure stage. As the interfacial water layer thickened, the molecular weight of the water invading the C-S-H gradually increased, and the desorption of Ca²⁺ ions in the surface region became significant, while the amount of Ca²⁺ ions entering the water-layer region increased. The interaction energy of the C-S-H/SiO₂ progressively became larger, and the energy ratio (ER) significantly decreased; the tensile strength σc and residual strength σr of C-S-H/SiO₂ both showed a downward trend. In summary, a lower water content had a limited impact on the interfacial bonding strength, while the weakening effect enhanced with an increase in the interfacial water content. This phenomenon was also demonstrated in concrete interfacial bond strength experiments.

Due to the high degree of weathering, the red clay slope has low anti-disintegration performance, and the clay easily becomes wet and disintegrates after soaking in water. It causes geological problems such as slope collapse caused by soil softening. To study the disintegration characteristics of modified red clay, the disintegration test of red clay modified by using lignin fiber, clay particles and lime was carried out, analyzing the disintegration characteristics of improved red clay from physical and chemical perspectives and analyzing the improvement mechanism of three modifiers with the scanning electron microscopy test. The analysis results show that the water-holding capacity and disintegration resistance of soil mixed with lignin fiber decrease; the disintegration time of reshaped red clay increases with the increase in clay content; and the average disintegration rate of the soil decreases with the increase in clay content. With the increase in lime content, the soil cement increases. The integrity of the soil is enhanced, and its anti-disintegration ability is improved; the saturated moisture content of reshaped red clay increases with the increase in lignin fiber and clay content, while the saturated moisture content of soil decreases with the increase in lime content. The damage analysis shows that the larger the damage factor of soil, the worse its anti-disintegration ability, and the easier the soil disintegrates. The purpose of this paper is to explore the essence of the soil disintegration phenomenon, and on this basis, using high-quality improved materials, to improve the soil, which easily disintegrates. This move aims to significantly enhance the anti-disintegration ability of the soil, thereby improving its resistance to softening and disintegration, thereby effectively improving and maintaining the ecological environment. At the same time, the improved soil will help to improve the utilization rate of the slope and foundation soil, thereby reducing the economic cost of maintenance engineering. Against the current background of sustainable economic, social, and ecological development, it is of great strategic significance to ensure the sustainable availability of land resources in specific areas and maintain their productivity and ecological stability for a long time. The research into this subject not only helps to deepen the understanding of soil disintegration, but also provides strong technical support for the rational utilization of land resources and the protection of the ecological environment.

Field pull out test results of 500 kV double-circuit line of Luping-Fule are presented in this paper to investigate the uplift bearing behavior of rock-socketed belled short piles. A calculation model of rock-socketed belled short pile has been proposed. During the initial stage of loading test, uplift load is shared by even section and bell of the pile, and the bell continues to bear uplift load after the lateral resistance of even section pile reaches the limit. A different performance has been found on the case of long belled pile. At the ultimate state, the uplift resistance provided by bell accounts for about 54.9% and 34.7% of the total uplift capacity for the 6.0 m long and 7.0 m long piles, respectively. Increasing pile length has been found to noticeably increase the ultimate uplift bearing capacity, while it has less effect on the displacement of pile top. The uplift capacity of even section pile is associated with the shear strength of rock mass around the pile, and the test results demonstrate that the ultimate resistance can be equal to the shear strength. The calculation method proposed in this paper is proven to be able to accurately predict the ultimate uplift bearing capacity of the rock-socketed belled short piles.

To investigate the toughening effect and stress–strain relationship of steel fibre-reinforced steel slag micropowder ultra-high-performance concrete (UHPC), nine sets of specimens with coarse aggregate and steel fibre contents were prepared for axial compression and elastic modulus tests. This study examines the variations in compressive strength and peak strain of the steel slag micropowder UHPC specimens to determine the corresponding characteristics of the stress–strain relationship. The results indicate that the experimental groups mixed with 1%, 1.5%, and 2% steel fibre increased the peak strain by about 20.3%, 25.3%, and 26.2%, respectively, compared to the non-steel fibre specimens. It can be seen that the toughening effect of UHPC with steel fibre and slag micro powder is good. With a fixed steel fibre content, the compressive strength and peak strain of steel slag micropowder UHPC initially increase and then decrease as the coarse aggregate content increases. The maximum compressive strength is achieved when the steel fibre content is 1.5% and the coarse aggregate content is 20%. A constitutive equation suitable for steel fibre-reinforced steel slag micropowder UHPC was derived through curve fitting based on the experimentally obtained stress–strain curves. The calculated values from the equation show deviations within 10% of the measured values, indicating a good fit. Nonlinear analysis of the entire compression process of prismatic specimens using the finite element method confirms the rationality of the constitutive equation, as the simulated curve closely aligns with the experimental curve. This research findings provide a reference for the engineering application of steel slag micropowder UHPC.