Blanka Krejci

Mrs. Blanka Krejci

Czech Hydrometeorological Institute
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2020 in Atmosphere
Verified
Journal Article
Open access
PDF file
RSRadim Seibert
Radim Seibert
INIrina Nikolova
Irina Nikolova
VVVladimíra Volná
Vladimíra Volná
BKBlanka Krejci
Blanka Krejci
DHDaniel Hladký
Daniel Hladký
This article focuses on the source apportionment of air pollution in a specific northeastern part of the Czech Republic. The research area, located around the city of Třinec, is significantly affected by a complex spectrum of air pollution sources, including local residential heating (coal and wood burning), heavy industry (mainly iron and steel production), road traffic, and regional and long-range air pollution transport from the nearby cities, Poland, and other countries. The main pollution sources contributing to the total concentration of fine suspended particles (PM2.5) were evaluated on the basis of the measurements at three sites and on subsequent positive matrix factorization modeling. The six major air pollution factors were identified, and their relative and absolute contributions were quantified. The result of the study is that the most important current task of air protection is to reduce the residential emissions from solid fuels, which are responsible for approximately 50–60% of PM2.5 concentration, followed by the regional primary and secondary aerosol sources (up to 40% of the total PM2.5 aerosol mass). Lower contributions have been identified in the case of resuspended mineral and biogenic particles (15–20%), long-range (trans-European) air pollution transport (up to 10%), and heavy industry (up to 10% in the most affected location). A detailed discussion has been provided considering specific regional EC (elemental carbon)–OC (organic carbon) relations in the region with traditional coal-burning for household heating which complicate the interpretation of the PMF (Positive Matrix Factorization) results, especially due to the interference between the traffic, residential heating, and biogenic aerosol factors.

1 May 2015 in Atmospheric Pollution Research
Verified
Journal Article
Open access
VTVossler Teri
Vossler Teri
CLCernikovsky Libor
Cernikovsky Libor
NJNovak Jiri
Novak Jiri
PHPlacha Helena
Placha Helena
BKBlanka Krejci
Blanka Krejci
WRWilliams Ronald
Williams Ronald

1 December 2016 in Central European Journal of Public Health
Verified
Journal Article
Closed access
LČLibor Černikovský
Libor Černikovský
BKBlanka Krejci
Blanka Krejci
ZBZdeněk Blažek
Zdeněk Blažek
VVVladimíra Volná
Vladimíra Volná
The Czech Hydrometeorological Institute (CHMI) estimated the transboundary transport of air pollution between the Czech Republic and Poland by assessing relationships between weather conditions and air pollution in the area as part of the "Air Quality Information System in the Polish-Czech border of the Silesian and Moravian-Silesian region" project (http://www.air-silesia.eu). Estimation of cross-border transport of pollutants is important for Czech-Polish negotiations and targeted measures for improving air quality. Direct measurement of PM10 and sulphur dioxide (SO2) concentrations and the direction and wind speed from measuring stations in the vicinity of the Czech-Polish state border in 2006-2012. Taking into account all the inaccuracies, simplifications and uncertainties, by which all of the measurements are affected, it is possible to state that the PM10 transboundary transport was greater from the direction of Poland to the Czech Republic, rather than the other way around. Nevertheless, the highest share of the overall PM10 concentration load was recorded on days with a vaguely estimated airflow direction. This usually included days with changing wind direction or days with a distinct wind change throughout the given day. A changeable wind is most common during low wind speeds. It can be assumed that during such days with an ambiguous daily airflow, the polluted air saturated with sources on both sides of the border moves from one country to the other. Therefore, we could roughly ascribe an equal level of these concentrations to both the Czech and Polish side. PM10 transboundary transport was higher from Poland to the Czech Republic than from the opposite direction, despite the predominant air flow from the Czech Republic to Poland.

17 February 2022 in Atmosphere
Verified
Journal Article
Open access
PDF file
VVVladimíra Volná
Vladimíra Volná
DHDaniel Hladký
Daniel Hladký
RSRadim Seibert
Radim Seibert
BKBlanka Krejci
Blanka Krejci
The article is occupied with the evaluation of the transboundary transport of pollutants in the Czech–Polish border region (between the Moravian-Silesian region and the Silesian Voivodeship) in Central Europe. It focuses on the evaluation of concentrations of benzo[a]pyrene (BaP) and suspended particles of PM10 depending on meteorological conditions, especially wind direction. The whole area of interest is heavily affected with air pollution of BaP and PM10. Limits of BaP and PM10 are still exceeded. Annual concentrations of benzo[a]pyrene are even several times higher than the value of its annual limit. The elaboration follows the results of the Czech–Polish project “Air Silesia”, which dealt with air pollution and the transboundary transport of pollutants in this area and took place in 2010 to 2013. Within this project, a higher transport of pollutants from Poland to the Czech Republic was established. The evaluation of the dependences of PM10 concentrations is based on hourly and daily data of PM10 and hourly data of meteorological quantities. To assess the dependences of daily BaP and PM10 concentrations, a methodology for evaluating daily types of wind direction was implemented into the processing. The results confirm that the problem of above-limit concentrations of BaP and PM10 in the Moravian-Silesian Region in the Czech Republic and the Silesian Voivodeship in Poland remains. The article confirms there is a higher transport of PM10 concentrations from Poland to the Czech Republic in the area of interest. Higher transport in the same direction is also predicted for daily concentrations of benzo[a]pyrene, although this cannot be clearly confirmed due to the lack of more detailed and identifiable data.

13 October 2021 in Environments
Verified
Journal Article
Open access
PDF file
RSRadim Seibert
Radim Seibert
INIrina Nikolova
Irina Nikolova
VVVladimíra Volná
Vladimíra Volná
BKBlanka Krejci
Blanka Krejci
DHDaniel Hladký
Daniel Hladký
The results of air quality monitoring show significantly increased concentrations of polycyclic aromatic hydrocarbons (PAH) and arsenic in the area located near the town of Kladno in Central Bohemia, Czech Republic. The region of interest is historically associated with coal mines and steelworks. Source apportionment using the method of Positive Matrix Factorization (PMF) at three sites has been used to try to explain the reasons of the increased PM2.5, benzo[a]pyrene, and arsenic concentrations in the ambient air. Based on the PMF analysis, nine factors explaining the atmospheric aerosol mass have been identified. The PMF results showed that most of the aerosol mass originated from residential heating (about one third of PM2.5), both primary particles and secondary organic aerosols induced by road traffic (up to approximately 25%), soil and other mineral dust (about 15%), secondary inorganic aerosol ammonium sulfate (up to 16%), ammonium nitrate (up to 14%) and other sulfates (up to 9%). The main source of arsenic and benzo[a]pyrene was residential heating, which accounted for two-thirds and 80% of their total mass, respectively. The results have pointed to the most important measures for effective air quality protection in the area of interest: replacing coal fuel and old boilers used for residential heating in order to reduce arsenic and PAH emissions and mitigate sources of secondary particles precursors to decrease PM concentrations.

30 January 2024 in Atmosphere
Verified
Journal Article
Open access
PDF file
VVVladimíra Volná
Vladimíra Volná
RSRadim Seibert
Radim Seibert
DHDaniel Hladký
Daniel Hladký
BKBlanka Krejci
Blanka Krejci
This contribution deals with the assessment of air pollution caused by atmospheric aerosol particulate matter fraction PM10 and benzo[a]pyrene (BaP) in the urban agglomeration of Ostrava, located in the Czech Republic in Central Europe. The motivation for this research was the need to identify the sources of air pollution in the area, particularly in locations where the contribution of different sources to concentrations of pollutants of concern has not been elucidated yet. In this study, source apportionment in the vicinity of the industrial hot spot was performed by statistically evaluating measured pollutant concentrations as a function of meteorological variables and using the Positive Matrix Factorization (PMF) receptor model. A significant methodological innovation and improvement over previous assessments was the higher monitoring resolution of benzo[a]pyrene, with samples collected at three-hour intervals instead of the standard 24 h collection period. The key findings indicate that in the cold part of the year, secondary particles—specifically sulfates and ammonium nitrates—were responsible for the most significant portion of PM10 air pollution throughout the area of interest. The contribution of these particles ranged from one-third to two-fifths of the total concentration, except at the industrial site of Ostrava–Radvanice (TORE), where they accounted for approximately one-fifth of the measured pollution concentration level. Emissions from individual household heating were identified as the main source of this type of pollution. With regards to benzo[a]pyrene air pollution, this study found that in the whole area of interest, except for the Ostrava–Radvanice site, it mainly originated from individual heating with coal (90%). In contrast, at the Ostrava–Radvanice site, two-thirds of the benzo[a]pyrene pollution came from the premises of Liberty Ostrava a.s., primarily from coke production, and less than one-third came from local domestic heating. This study also determined the spatial extent of the occurrence of extremely high benzo[a]pyrene concentrations (above 5 ng/m3), which are estimated to affect nearly 10,000 inhabitants. The results confirm that the data from the TORE station are only representative of its immediate surroundings and are not applicable to the assessment of air quality and causes of air pollution in the whole city of Ostrava or the urban area of Ostrava–Radvanice as a whole. After years of research, these findings provide the Ministry of the Environment of the Czech Republic and the government with an accurate basis for implementing measures to address the identified pollution sources in the area of interest. The success of this study was made possible by the adoption of a more detailed sampling approach, which involved a resolution of 3 h instead of 24 h. This methodological improvement is a significant finding and will be useful for future source apportionment studies.