We propose a photonic method to generate and transmit dual-band dual-chirp microwave waveforms based on a dual-polarization dual-parallel Mach-Zehnder modulator (DP-DPMZM). The key novelty of this work is the generation of dual-band dual-chirp waveforms with flexible central frequency relationship to meet the requirement of the dual-band radar system, and transmission of the generated waveforms with elimination of power fading. In the proposed method, dual-band dual-chirp microwave waveforms are generated by applying two different RF signals and a parabolic coding signal to the DP-DPMZM. By properly adjusting the DC biases of the x -DPMZM and y -DPMZM, dispersion-induced power fading effect in the transmission of the generated waveforms can be compensated. A proof-of-concept experiment is conducted to generate and transmit dual-band dual-chirp microwave signals at C-band and X-band (centered at 7 GHz and 10 GHz) with tunable bandwidth. The proposed system has a simple structure and good reconfigurability, which has great potential in applications such as dual-band radar systems.
We propose and experimentally verify an approach to generate pulsed microwave signal with continuously tunable phase and discrete tuning in microwave frequency based on phase shifted Lyot optical filter in conjunction with wavelength-to-time mapping technology. The Lyot optical filter with the discretely tunable spectral spacing is realized by changing the state of polarization of the bidirectionally propagated optical signals. The frequency response of the filter is continuously tuned over a full free-spectral range (FSR) keeping its shape and FSR unchanged by simple adjusting the bias voltage of the phase modulator. The proposed approach could also obtain pulsed microwave frequency multiplication with a discretely tunable multiplication factor by simply cascading multiple Lyot optical filters in the form of series. The proposed scheme is theoretically analyzed and experimentally demonstrated.
We proposed a new type of distributed feedback laser with alternating active- and passive-cavities (APC DFB), which enjoys the same quantum well layer where the butt-joint re-growth process can be avoided. By utilizing the chirp characteristics of the APC DFB laser in a delayed self-heterodyne system, a chirped microwave signal with a sweep range up to 40 GHz and a sweep period of 25 μs is generated. The power fluctuation of the generated signal between 0-40 GHz within 30 minutes does not exceed 3 dB, and the scanning range fluctuates about 600 MHz. And experiment results show that the thermal efficiency of the current is always related to the working environment. In the static wavelength measurement, it is controlled by the injection current; when the chirped signal is generated, it is determined by the bias current. In particular, the waveform and the period as well as the sweep range of the generated chirped microwave signals can be accurately tuned by adjusting the modulating current, which has provided a deeper insight into the photonic generation of microwave signals.
21 January 2021 in Microwave and Optical Technology Letters
The influence of unpassivated photosensitive surface on the dark current of photodiodes is discussed in this paper. The performance parameters of the SiNx covered and non-SiNx covered devices are compared through a controlled experiment.