13 January 2022 in Journal of Lightwave Technology
A photonic system based on a two-channel structure is proposed to realize the simultaneous measurement of angle-of-arrival (AOA) and Doppler-frequency-shift (DFS) of microwave signal without direction ambiguity. The unambiguous AOA measurement can be acquired by recording the power of the output intermediate frequency (IF) signal and output radio frequency (RF) signal from two channels. The DFS can be determined from the frequency of the IF signal. Estimated experimental results show that a −66.44° to 66.44° AOA measurement with errors of less than ±2.2° and an unambiguous DFS measurement with errors of ±0.6 Hz are implemented.
1 August 2022 in Journal of Lightwave Technology
We propose a microwave photonic frequency measurement scheme based a dual-polarization dual-drive Mach-Zehnder modulator (DP-DDMZM) and frequency -to-time mapping. A compact frequency measurement system is guaranteed thanks to the use of a single modulator, and multi-tone measurement ability is achieved due to the principle of frequency-to-time mapping. In the proposed scheme, the unknown microwave signal is mixed with a linearly chirped microwave signal with the help of the DP-DDMZM, and the mixing product is selected by an electrical bandpass filter to achieve frequency-to-time mapping. Single and multi-tone microwave frequency measurement are successfully demonstrated in the experiment, and the measurement errors are less than ± 3 MHz.
12 May 2022 in Journal of Lightwave Technology
We report a novel temperature sensor based on a Fourier domain mode-locked optoelectronic oscillator (FDML OEO) and temperature-to-time mapping. In the proposed scheme, a narrow bandpass electrical filter is inserted into the FDML OEO cavity. The temperature information is mapped to the time interval of the output pulses due to the temperature-sensitive bidirectional scanning property of the FDML OEO. Compared with other OEO-based temperature sensors, the proposed scheme avoids the needs of wideband electrical spectrum analyzers, since the temperature-sensitive output pulses can be interrogated using a low-speed oscilloscope working under sub-Nyquist sampling condition. In the proof-of-concept experiment, a high sensitivity of 8.166 μs/°C and resolution of 0.03°C is achieved, demonstrating a good temperature sensing performance.
3 December 2021 in IEEE Photonics Technology Letters
We report a novel simple photonic approach for measuring the Doppler frequency shift (DFS) and the angle of arrival (AOA) of a microwave signal in a radar detection system. The echo signals combined with a reference signal are applied to a dual-polarization Mach-Zehnder modulator (DPol-MZM), and a low-frequency electrical signal is generated after beating between the two signals in a low-speed photodetector. The DFS without direction ambiguity can be calculated by the value of the low-frequency signal. A phase difference is introduced between two echo signals which are sent to two sub-MZMs of the DPol-MZM respectively. The AOA is determined by the peak power of the down-convert signals, and a simple calibration is used to remove the amplitude of the echo signals and the reference signal by switching the output polarization states of the system. Compared with previously reported works, the proposed method carries out a comprehensive and multifunction measurement system based on a filterless and simple structure. Experimental results demonstrate the DFS errors within ± 0.5 Hz for a 15 GHz echo signal with a frequency offset of ± 100 kHz, and AOA measurement errors are within ± 1° for a range of 16° – 82°
8 January 2021 in IEEE Photonics Journal
We propose a photonic method to generate and transmit dual-band dual-chirp microwave waveforms based on a dual-polarization dual-parallel Mach-Zehnder modulator (DP-DPMZM). The key novelty of this work is the generation of dual-band dual-chirp waveforms with flexible central frequency relationship to meet the requirement of the dual-band radar system, and transmission of the generated waveforms with elimination of power fading. In the proposed method, dual-band dual-chirp microwave waveforms are generated by applying two different RF signals and a parabolic coding signal to the DP-DPMZM. By properly adjusting the DC biases of the x -DPMZM and y -DPMZM, dispersion-induced power fading effect in the transmission of the generated waveforms can be compensated. A proof-of-concept experiment is conducted to generate and transmit dual-band dual-chirp microwave signals at C-band and X-band (centered at 7 GHz and 10 GHz) with tunable bandwidth. The proposed system has a simple structure and good reconfigurability, which has great potential in applications such as dual-band radar systems.