Flood simulation and forecast capability have been greatly improved, thanks to the advances in data assimilation (DA). Such an approach combines in situ gauge measurements with numerical hydrodynamic models to correct the hydraulic states and reduce the uncertainties in model parameters. However, these methods depend strongly on the availability and quality of observations, thus necessitating other data sources to improve the flood simulation and forecast performances. Using Sentinel-1 images, a flood extent mapping method was carried out by applying a Random Forest algorithm trained on past flood events using manually delineated flood maps. The study area concerns a 50-km reach of the Garonne Marmandaise catchment. Two recent flood events are simulated in analysis and forecast modes, with a +24-h lead time. This study demonstrates the merits of using synthetic aperture radar (SAR)-derived flood extent maps to validate and improve the forecast results based on hydrodynamic numerical models with Telemac2D-ensemble Kalman filter (EnKF). Quantitative 1-D and 2-D metrics were computed to assess water-level time-series and flood extents between the simulations and observations. It was shown that the free run experiment without DA underestimates flooding. On the other hand, the validation of DA results with respect to independent SAR-derived flood extent allows to diagnose a model–observation bias that leads to over-flooding. Once this bias is taken into account, DA provides a sequential correction of area-based friction coefficients and inflow discharge, yielding a better flood extent representation. This study paves the way toward a reliable solution for flood forecasting over poorly gauged catchments, thanks to the available remote sensing datasets.
Flooding is one of the most devastating natural hazards to which our society worldwide must adapt, especially as its severity and occurrence tend to increase with climate changes. This research work focuses on the assimilation of two‐dimensional (2D) flood observations derived from remote‐sensing images acquired during overflowing events. To do so, the resulting binary wet/dry maps are expressed in terms of wet surface ratios (WSR) over a number of floodplain subdomains. This ratio is assimilated jointly with in‐situ water‐level gauge observations to improve the flow dynamics within the floodplain. An Ensemble Kalman Filter (EnKF) with a dual state‐parameter analysis approach is implemented on top of a TELEMAC‐2D hydrodynamic model. The EnKF control vector is composed of spatially‐distributed friction coefficients and a corrective parameter of the inflow discharge. It is extended with the hydraulic states within the floodplain subdomains. This data assimilation strategy was validated and evaluated over a reach of the Garonne river. The observation operator associated with the WSR observations, as well as the dual state‐parameter sequential correction, was first validated in the context of Observing System Simulation Experiments. It was then applied to two real flood events that occurred in 2019 and 2021. The merits of assimilating synthetic aperture radar‐derived WSR observations, in complement to the in‐situ water‐level observations, are shown in the parameter and observation spaces with assessment metrics computed over the entire flood events. It is also shown that the hydraulic state correction within the dual state‐parameter analysis approach significantly improves the flood dynamics, especially during the flood recess.
Automatic extraction of buildings in urban and residential scenes has become a subject of growing interest in the domain of photogrammetry and remote sensing, particularly since the mid-1990s. Active contour model, colloquially known as snake model, has been studied to extract buildings from aerial and satellite imagery. However, this task is still very challenging due to the complexity of building size, shape, and its surrounding environment. This complexity leads to a major obstacle for carrying out a reliable large-scale building extraction, since the involved prior information and assumptions on building such as shape, size, and color cannot be generalized over large areas. This paper presents an efficient snake model to overcome such a challenge, called Super-Resolution-based Snake Model (SRSM). The SRSM operates on high-resolution Light Detection and Ranging (LiDAR)-based elevation images—called z-images—generated by a super-resolution process applied to LiDAR data. The involved balloon force model is also improved to shrink or inflate adaptively, instead of inflating continuously. This method is applicable for a large scale such as city scale and even larger, while having a high level of automation and not requiring any prior knowledge nor training data from the urban scenes (hence unsupervised). It achieves high overall accuracy when tested on various datasets. For instance, the proposed SRSM yields an average area-based Quality of 86.57% and object-based Quality of 81.60% on the ISPRS Vaihingen benchmark datasets. Compared to other methods using this benchmark dataset, this level of accuracy is highly desirable even for a supervised method. Similarly desirable outcomes are obtained when carrying out the proposed SRSM on the whole City of Quebec (total area of 656 km2), yielding an area-based Quality of 62.37% and an object-based Quality of 63.21%.
30 November 2023 in IEEE Transactions on Geoscience and Remote Sensing
Flood simulation and forecast capability have been greatly improved thanks to advances in data assimilation (DA) strategies incorporating various types of observations; many are derived from Earth Observations from space. This paper focuses on the assimilation of 2D flood observations derived from Synthetic Aperture Radar (SAR) images acquired during a flood event with a dual state-parameter Ensemble Kalman Filter (EnKF). Resulting binary wet/dry maps are here expressed in terms of wet surface ratios (WSR) over a number of subdomains of the floodplain. This ratio is assimilated jointly with in-situ water-level observations to improve the flow dynamics within the floodplain. However, the non-Gaussianity of the observation errors associated with these SAR-derived measurements break a major hypothesis for the application of the EnKF, thus jeopardizing the optimality of the filter analysis. The novelty of this paper lies in the treatment of the non-Gaussianity of the SAR-derived WSR observations with a Gaussian anamorphosis (GA) process. This DA strategy was validated and applied over the Garonne Marmandaise catchment (South-west of France) represented with a TELEMAC-2D hydrodynamic model, first in a twin experiment and then for a major flood event that occurred in January-February 2021. It was shown that assimilating SAR-derived WSR observations, in complement to the in-situ water-level observations significantly improves the representation of the flood dynamics. The GA process brings further improvement to the DA analysis, while has also been demonstrated to be a non-essential element. This study heralds a reliable solution for flood forecasting over poorly gauged catchments thanks to available remote-sensing datasets.