In this study, we investigated the morphological features and tensile properties of the forewing costal vein of the honeybee (Apis mellifera) under fresh, dry and in vitro-time varied conditions. The costal vein is composed of an outer sub-vein and an inner vein starting from the wing base to nearly 50% of the wing span and then they are fused into one vein extending to the wing tip. Confocal laser scanning microscopy revealed that the outer sub-vein with red autofluorescence is stiffer than the inner one with green autofluorescence, and the membrane in the gap between the sub-veins exhibited a long blue-autofluorescence resilin stripe. Considering the irregular cross-sectional shape of the costal vein, cross-sections of the tested specimens after tensile failure were analysed using scanning electron microscopy, to precisely calculate their cross-sectional areas by a customized MATLAB program. The Young's modulus and tensile strength of fresh specimens were ∼4.78 GPa and ∼119.84 MPa, which are lower than those of dry specimens (∼9.08 GPa and ∼154.45 MPa). However, the tensile strain had the opposite relationship (fresh: ∼0.031, dry: ∼0.018). Thus, specimen desiccation results in increasing stiffness and brittleness. The morphological features and material properties of the costal vein taken together represent a tradeoff between both deformability and stiffness. Our study provides guidance for material selection and bionic design of the technical wings of flapping micro aerial vehicles.
Fore- and hindwings of honeybees are coupled and synchronized to flap by means of a forewing posterior recurved margin (PRM) and hindwing hamuli which constitute a hook–furrow coupling. Morphological analysis shows that the PRM is composed of a thickened and sclerotized membrane with the Archimedean spiral configuration and hamuli are a set of tiny, sclerotized hooks with flexible bases. By developing a theoretical PRM model, the influence of cuticle sclerotization and membrane-thickening on a deforming pattern and maximal coupling force was comparatively simulated, indicating that the real PRM is capable of bearing the highest coupling force and the membrane thickening makes more contribution than cuticle sclerotization on augmenting the maximal coupling force that the PRM can resist. In addition, four combined strategies, i.e. the hook shape, Archimedean spiral, rich resilin concentration, and cuticle sclerotization in different parts of the whole system were proposed, and deemed to endow the honeybee wing-coupling with remarkable stability and durability to eliminate a potential structural failure of the coupling over millions of wing flapping cycles across the honeybee lifespan. This study assists us in the comprehensive understanding of the functionality of the hook–furrow wing-coupling and shows us new avenues for biomimetics of mobile coupling mechanisms in modern engineering.