With the aim to reduce the influence of flammability and brittleness of epoxy resin (EP) on its applications, a phosphorus‐containing oligomer (BID) containing phosphophenanthrene group and flexible chain segment is designed and applied to methyltetrahydrophthalic anhydride (MeTHPA) curing EP systems. Compared with EP/MeTHPA, the glass transition temperature (Tg) declines after introducing BID. But the addition of BID endows EP/MeTHPA with good flame retardancy. When the dosage is only 19.2 wt.%, the limiting oxygen index (LOI) of EP/BID/MeTHPA increases by 77% to 36% (P content: 1.5 wt.%) compared with EP and reaches the vertical combustion (UL‐94) V‐0 rating. Cone calorimetry (CC) results reveal that PHRR and THR drop by 40% and 31%. The pyrolytic process and char residue data analysis show that BID plays flame‐retardant role in gas phase and condensed phase. In addition, impact and flexural and tensile strength improve by 84%, 19% and 54% individually, proving that BID holds a potential on enhancing mechanical performance of EP/MeTHPA.
Shell is a multilayered system for protecting the bivalve Mytilus edulis. In contrast to well-developed research on the nacreous component, the protective function of the M. edulis shell as a whole system is not fully understood. Especially, the question of why nacre is situated at the inner side of the shell rather than on the outer remains unclear. Herein the acid resistance of different shell layers was compared using etching tests and the mechanical protection performance of the shell was tested using three-point bending. Two bending loads, including static and dynamic, were applied on the shell samples from outside in (i.e., the out-in bending) and from inside out (i.e., the in-out bending), respectively. Our etching results show that the outside existence of prismatic calcite endows M. edulis with stronger acid resistance than if when the nacre would be outside. On the contrary, the out-in and in-out bending tests reveal that a better mechanical protection of the shell against slow mechanical attacks is achieved if when the nacre was outside. The shell has the same mechanical properties against dynamic mechanical attacks regardless of nacre location. Briefly, the nacre should be on the outside of the shell for a better mechanical protection while the outside location of the prismatic layer offers a stronger resistance against etching. The inside natural location of nacre is the compromise between mechanical and chemical protection mechanisms against complex survival environment. This strongly contributes to our understanding of biological design principles and further development of shell-inspired protective materials.
Representatives of arthropods, the largest animal phylum, occupy terrestrial, aquatic, arboreal, and subterranean niches. Their evolutionary success depends on specific morphological and biomechanical adaptations related to their materials and structures. Biologists and engineers have become increasingly interested in exploring these natural solutions to understand relationships between structures, materials, and their functions in living organisms. The aim of this special issue is to present the state-of-the-art research in this interdisciplinary field using modern methodology, such as imaging techniques, mechanical testing, movement capture, and numerical modeling. It contains nine original research reports covering diverse topics, including flight, locomotion, and attachment of the arthropods. The research achievements are essential not only to understand ecological adaptations, and evolutionary and behavioral traits, but also to drive prominent advances for engineering from exploitation of numerous biomimetic ideas.