SUMMARY: In reservoir and environmental studies, the geological material characterization is often done by measuring its electrical conductivity. Its main interest is due to its sensitivity to physical properties of porous media (i.e. structure, water content, or fluid composition). Its quantitative use therefore depends on the efficiency of the theoretical models to link them. In this study, we develop a new physically based model that takes into account the surface conductivity for estimating electrical conductivity of porous media under partially saturated conditions. The proposed model is expressed in terms of electrical conductivity of the pore fluid, water saturation, critical water saturation and microstructural parameters such as the minimum and maximum pore/capillary radii, the pore fractal dimension, the tortuosity fractal dimension and the porosity. Factors influencing the electrical conductivity in porous media are also analysed. From the proposed model, we obtain an expression for the relative electrical conductivity that is consistent with other models in literature. The model predictions are successfully compared with published experimental data for different types of porous media. The new physically based model for electrical conductivity opens up new possibilities to characterize porous media under partially saturated conditions with geoelectrical and electromagnetic techniques.
The electrokinetics methods have great potential to characterize hydrogeological processes in porous media, especially in complex partially saturated hydrosystems (e.g., the vadose zone). The dependence of the streaming coupling coefficient on water saturation remains highly debated in both theoretical and experimental works. In this work, we propose a physically based model for the streaming potential coupling coefficient in porous media during the flow of water and air under partially saturated conditions. The proposed model is linked to fluid electrical conductivity, water saturation, irreducible water saturation, and microstructural parameters of porous materials. In particular, the surface conductivity of porous media has been taken into account in the model. In addition, we also obtain an expression for the characteristic length scale at full saturation in this work. The proposed model is successfully validated using experimental data from literature. A relationship between the streaming potential coupling coefficient and the effective excess charge density is also obtained in this work and the result is the same as those proposed in literature using different approaches. The model proposes a simple and efficient way to model the streaming potential generation for partially saturated porous media and can be useful for hydrogeophysical studies in the critical zone.
7 December 2021 in Geophysical Journal International
SUMMARY: Seismoelectric signals are generated by electrokinetic coupling from seismic wave propagation in fluid-filled porous media. This process is directly related to the existence of an electrical double layer at the interface between the pore fluid and minerals composing the pore walls. The seismoelectric method attracts the interest of researchers in different areas, from oil and gas reservoir characterization to hydrogeophysics, due to the sensitivity of the seismoelectric signals to medium and fluid properties. In this work, we propose a physically based model for the dynamic streaming potential coupling coefficient (SPCC) by conceptualizing a porous medium as a bundle of tortuous capillaries characterized by presenting different pore size distributions (PSD). The results show that the dynamic streaming potential coupling coefficient is a complex function depending on the properties of pore fluid, mineral–pore fluid interfaces, microstructural parameters of porous media and frequency. Parameters influencing the dynamic SPCC are investigated and explained. In particular, we show that the PSD affects the transition frequency as well as the shape of the SPCC response as a function of frequency. The proposed model is then compared with published data and previous models. It is found that the approach using the lognormal distribution is in very good agreement with experimental data as well as with previous models. Conversely, the approach that uses the fractal distribution provides a good match with published data for sandstone samples but not for sand samples. This result implies that the fractal PSD may not be pertinent for the considered sand samples, which exhibit a relatively narrow distribution of pore sizes. Our proposed approach can work for any PSD, for example, including complex ones such as double porosity or inferred from direct measurements. This makes the proposed models more versatile than models available in literature.
Electrokinetic phenomena are the result of a coupling between a fluid flow and an electric current flow in porous rocks. The zeta potential is an important parameter that influences the electrokinetic coupling. Most reservoir rocks are saturated or partially saturated by natural water containing various types of ions. Therefore, it is important to understand how the zeta potential and therefore the electric double layer (EDL) behave for different types of ions or electrolytes. Types of electrolytes influence the zeta potential most by affecting the surface charge — by changing the thickness of the EDL and the exact location of the shear plane. To study the dependence of the zeta potential on various electrolytes, we have carried out streaming potential measurements for consolidated rock samples saturated by monovalent and divalent electrolytes. From streaming potential coefficients, the zeta potential is obtained for different systems of electrolytes and rocks. The experimental results of silica-based rocks are then compared with theoretical models. For 1:1 or 1:2 electrolytes, a theoretical model for the zeta potential that has been available in literature is used. For 2:2 or 2:1 electrolytes, we have developed a new model to calculate the Stern potential and the zeta potential. The comparison found that the theoretical models can explain the main behavior of the zeta potential against types of electrolytes and types of silica-based rocks. The results show that the zeta potential for monovalent electrolytes is higher than that for divalent electrolytes. The zeta potential of the silica-based samples is higher than that of the nonsilica-based samples when they are saturated by the same types of electrolyte.
Electrokinetics methods have attracted increasing interest to characterize hydrogeological processes in geological media, especially in complex hydrosystems such as fractured formations. In this work, we conceptualize fractured media as a bunch of parallel capillary fractures following the fractal size distribution. This conceptualization permits to obtain analytical models for both the electrical conductivity and the electrokinetic coupling in water saturated fractured media. We explore two different approaches to express the electrokinetic coupling. First, we express the streaming potential coupling coefficient as a function of the zeta potential and then we obtain the effective charge density in terms of macroscopic hydraulic and electrokinetic parameters of porous media. We show that when the surface electrical conductivity is negligible, the proposed models reduces to the previously proposed one based on a bundle of cylindrical capillaries. This model opens up a wide range of applications to monitor the water flow in fractured media.