The effectiveness of cell transplantation can be improved by optimization of the transplantation site. For some types of cells that form highly oxygen-demanding tissue, e.g., pancreatic islets, a successful engraftment depends on immediate and sufficient blood supply. This critical point can be avoided when cells are transplanted into a bioengineered pre-vascularized cavity which can be formed using a polymer scaffold. In our study, we tested surface-modified poly(lactide-co-caprolactone) (PLCL) capsular scaffolds containing the pro-angiogenic factor VEGF. After each modification step (i.e., amination and heparinization), the surface properties and morphology of scaffolds were characterized by ATR-FTIR and XPS spectroscopy, and by SEM and AFM. All modifications preserved the gross capsule morphology and maintained the open pore structure. Optimized aminolysis conditions decreased the M_w of PLCL only up to 10% while generating a sufficient number of NH₂ groups required for the covalent immobilization of heparin. The heparin layer served as a VEGF reservoir with an in vitro VEGF release for at least four weeks. In vivo studies revealed that to obtain highly vascularized PLCL capsules (a) the optimal VEGF dose for the capsule was 50 μg and (b) the implantation time was four weeks when implanted into the greater omentum of Lewis rats; dense fibrous tissue accompanied by vessels completely infiltrated the scaffold and created sparse granulation tissue within the internal cavity of the capsule. The prepared pre-vascularized pouch enabled the islet graft survival and functioning for at least 50 days after islet transplantation. The proposed construct can be used to create a reliable pre-vascularized pouch for cell transplantation.

This study evaluated the ability of magnetic resonance imaging (MRI) to predict failure of pancreatic islets (PI) transplanted into the hepatic portal vein. Brown-Norway (n = 18) and Lewis (n = 6) rats received islets isolated from Lewis donors. The rejection process in Brown-Norway recipients was mitigated by two different immunosuppressive regimens [tacrolimus + hydrocortisone for 3 months (n = 6) or tacrolimus for 12 days (n = 12)]. Longitudinal MRI monitoring of recipients at post-transplantation weeks 1, 2, 3, 4, 6, 8, 10, and 12 confirmed the ability to detect SPIO labeled PI after transplantation into the liver. The relative number of MRI signals related to PI isografts remained stable up to study completion. Recipients of PI allografts were normoglycemic until the end of study; signals declined gradually to 44 ± 17% in these animals. In animals with islets failure during post-transplant week 12, the number of signals decreased to 25 ± 10% of initial values. The difference between groups (islet function/failed) became significant post-transplant week 3. Our data demonstrate that the MRI changes attributable to rejection become apparent within 3 weeks after transplantation, i.e. at least 8 weeks before functional allograft failure.

Digital image analysis (DIA) is a new method in assessment of islet amount, which is expected to provide reliable and consistent results. We compared this method with conventional counting of small numbers of rat islets. Islets were isolated from 8 pancreases and counted in 24 samples in duplicate, first routinely by sizing according to estimated diameters under a calibrated reticule and then by processing of islets pictures taken by camera. As presumed, no significant difference was found in absolute numbers of islets per sample between DIA and conventional assessment. Volumes of islets per sample measured by DIA were on average more than 10% higher than amounts evaluated conventionally, which was statistically significant. DIA has been shown to be an important method to remove operator bias and provide consistent results. Evaluation of only two dimensions of three-dimensional objects still represents a certain limitation of this technique. With lowering of computer prices the system could become easily available for islet laboratories.

The porous polymer foams act as a template for neotissuegenesis in tissue engineering, and, as a reservoir for cell transplants such as pancreatic islets while simultaneously providing a functional interface with the host body. The fabrication of foams with the controlled shape, size and pore structure is of prime importance in various bioengineering applications. To this end, here we demonstrate a thermally induced phase separation (TIPS) based facile process for the fabrication of polymer foams with a controlled architecture. The setup comprises of a metallic template bar (T), a metallic conducting block (C) and a non-metallic reservoir tube (R), connected in sequence T-C-R. The process hereinafter termed as Dip TIPS, involves the dipping of the T-bar into a polymer solution, followed by filling of the R-tube with a freezing mixture to induce the phase separation of a polymer solution in the immediate vicinity of T-bar; Subsequent free-drying or freeze-extraction steps produced the polymer foams. An easy exchange of the T-bar of a spherical or rectangular shape allowed the fabrication of tubular, open- capsular and flat-sheet shaped foams. A mere change in the quenching time produced the foams with a thickness ranging from hundreds of microns to several millimeters. And, the pore size was conveniently controlled by varying either the polymer concentration or the quenching temperature. Subsequent in vivo studies in brown Norway rats for 4-weeks demonstrated the guided cell infiltration and homogenous cell distribution through the polymer matrix, without any fibrous capsule and necrotic core. In conclusion, the results show the “Dip TIPS” as a facile and adaptable process for the fabrication of anisotropic channeled porous polymer foams of various shapes and sizes for potential applications in tissue engineering, cell transplantation and other related fields.

The replacement of pancreatic islets for the possible treatment of type 1 diabetes is limited by the extremely high oxygen demand of the islets. To this end, here we hypothesize to create a novel extra-hepatic highly-vascularized bioartificial cavity using a porous scaffold as a template and using the host body as a living bioreactor for subsequent islet transplantation. Polylactide-based capsular-shaped anisotropic channeled porous scaffolds were prepared by following the unidirectional thermally-induced phase separation technique, and were implanted under the skin and in the greater omentum of Brown Norway rats. Polyamide mesh-based isotropic regular porous capsules were used as the controls. After 4weeks, the implants were excised and analyzed by histology. The hematoxylin and eosin, as well as Masson's trichrome staining, revealed a) low or no infiltration of giant inflammatory cells in the implant, b) minor but insignificant fibrosis around the implant, c) guided infiltration of host cells in the test capsule in contrast to random cell infiltration in the control capsule, and d) relatively superior cell infiltration in the capsules implanted in the greater omentum than in the capsules implanted under the skin. Furthermore, the anti-CD31 immunohistochemistry staining revealed numerous vessels at the implant site, but mostly on the external surface of the capsules. Taken together, the current study, the first of its kind, is a significant step-forward towards engineering a bioartificial microenvironment for the transplantation of islets.

Background.: Transplantation of pancreatic islets into subcutaneous cavities in diabetic rats may be as or even more effective than transplantation into the portal vein. Identifying the optimal timing of the individual steps in this procedure is critical. Methods.: Macroporous scaffolds were placed in the subcutaneous tissue of diabetic male Lewis rats for 7 or 28 d and the healing of the tissue inside the scaffolds was monitored. A marginal syngeneic graft comprising 4 islets/g of recipient body weight was transplanted at the best timing focusing mainly on vascularization. Recipients were monitored for blood glucose levels and tolerance tests. Histological examination was performed in all implanted scaffolds. The presence of individual endocrine cells was analyzed in detail. Results.: Blood glucose levels remained within the physiological range in all recipients until the end of experiment as well as body weight increase. Coefficients of glucose assimilation were normal or slightly reduced with no statistically significant differences between the groups 40 and 80 d after transplantation. Histological analysis revealed round viable islets in the liver similar to those in pancreas, but alpha cells practically disappeared, whereas islets in the scaffolds formed clusters of cells surrounded by rich vascular network and the alpha cells remained partially preserved. Conclusions.: Subcutaneous transplantation of pancreatic islets is considerably less invasive but comparably efficient as commonly used islet transplantation into the portal vein. In consideration of alpha and beta cell ratio, the artificial subcutaneous cavities represent a promising site for future islet transplantation therapy.