Temperature, voltage, and current sensors monitor the operation of a TCP/IP offload accelerator engine fabricated in 90nm CMOS, and a control unit dynamically changes frequency, voltage, and body bias for optimum performance and energy efficiency. Fast response to droops and temperature changes is enabled by a multi-PLL clocking unit and on-chip body bias. Adaptive techniques are also used to compensate performance degradation due to device aging, reducing the aging guardband.
A wireless sensor node (WSN) integrates a 0.79mm2 near-threshold voltage (NTV) 32-bit Intel Architecture (IA) microcontroller (MCU) in 14nm tri-gate CMOS, along with solar cell, energy harvester, flash memory, sensors and Bluetooth Low Energy (BLE) radio, to enable always-on always-sensing (AOAS) and advanced edge computing capabilities in Internet-of-Things (IoT) systems. The MCU features four independent voltage-frequency islands (VFI), a low-leakage SRAM array, an on-die oscillator clock source capable of operating at sub-threshold voltage, power gating and multiple active/sleep states, managed by an integrated power management unit (PMU). The MCU operates across a wide frequency (voltage) range of 297MHz (1V) to 0.5MHz (308mV), and achieves a peak energy efficiency of 17pJ/cycle at an optimum supply voltage (VOPT) of 370mV, operating at 3.5MHz. The WSN, powered by a solar cell, demonstrates sustained MHz AOAS operation, consuming only 360μW.
10 March 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
The system-on-chip (SoC) designs for future Internet of Things (IoT) systems, spanning client platforms to cloud datacenters, need to deliver uncompromising and scalable performance with extreme energy efficiency for diverse workloads and applications, while satisfying a wide range of energy budgets, as well as platform cooling and power delivery constraints. Low-latency, burst-mode responsiveness, and scalable high-throughput performance must be delivered on demand for a range of thread-parallel, task-parallel, and data-parallel workloads covering traditional and emerging applications. This article discusses the challenges and opportunities for many-core SoC design in scaled CMOS process operating over a wide voltage-frequency range including near-threshold-voltage (NTV) that can meet the compute demands of the future at scale, flexibly, and efficiently. This article covers: 1) circuit design techniques for NTV cores; 2) mitigation techniques for within-die parameter variations via multivoltage frequency schemes; 3) digital integrated voltage regulators (VRs) for fine-grain and wide-range voltage modulation; and 4) radiation-induced soft error rate (SER) characterization and mitigation techniques to enable reliable operation at NTV. Silicon prototype examples will be used to illustrate the different techniques and highlight future research directions.
Aggressive power supply scaling into the near-threshold voltage (NTV) region holds great potential for applications with strict energy budgets, since the energy efficiency peaks as the supply voltage approaches the threshold voltage (VT) of the CMOS transistors. The improved silicon energy efficiency promises to fit more cores in a given power envelope. As a result, many-core Near-threshold computing (NTC) has emerged as an attractive paradigm. Realizing energy-efficient heterogenous system on chips (SoCs) necessitates key NTV-optimized ingredients, recipes and IP blocks; including CPUs, graphic vector engines, interconnect fabrics and mm-scale microcontroller (MCU) designs. We discuss application of NTV design techniques, necessary for reliable operation over a wide supply voltage range—from nominal down to the NTV regime, and for a variety of IPs. Evaluation results spanning Intel’s 32-, 22- and 14-nm CMOS technologies across four test chips are presented, confirming substantial energy benefits that scale well with Moore’s law.