Solvents are used in every chemical process and affect its overall safety, environmental, and economic impact. Membrane processes have attracted increasing interest as sustainable alternatives to traditional technologies, being characterized by reduced energy consumption and use of chemicals. However, the most important membrane preparation techniques are often based on the use of toxic solvents, which reduces the benefit to the environment. Due to the influence of solvent properties such as viscosity, dielectric constant, polarity, and boiling point on the final features and the indispensable prerequisite of dissolving the selected polymer (at room or high temperature, depending on the technique), one of the most difficult but most interesting challenges for membrane scientists is replacing these solvents, such as N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), N-methyl-2-pyrrolidone (NMP), and tetrahydrofuran (THF), with safer alternatives. In this review, the most relevant steps towards the use of non-toxic solvents in membrane preparation are reported, focusing particular attention on the non-solvent induced and temperature induced phase separation (NIPS and TIPS) techniques. Supercritical CO2 (ScCO2) and ionic liquids (ILs) are promising examples of benign solvents, and their use in membrane preparation will also be described. The total replacement of toxic diluents with greener alternatives still remains at the beginning stages. However, in several cases, membranes prepared using less/non-toxic solvents achieved performance comparable to those produced with classical toxic solvents. This review offers valid support for membrane scientists who wish to reduce the environmental impact of solvent use and increase membrane processes sustainability.
The use of membrane-based technologies has been applied for water treatment applications; however, the limitations of conventional polymeric membranes have led to the addition of inorganic fillers to enhance their performance. In recent years, nanocomposite membranes have greatly attracted the attention of scientists for water treatment applications such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, heavy metals, etc. The incorporation of different nanofillers, such as carbon nanotubes, zinc oxide, graphene oxide, silver and copper nanoparticles, titanium dioxide, 2D materials, and some other novel nano-scale materials into polymeric membranes have provided great advances, e.g., enhancing on hydrophilicity, suppressing the accumulation of pollutants and foulants, enhancing rejection efficiencies and improving mechanical properties and thermal stabilities. Thereby, the aim of this work is to provide up-to-date information related to those novel nanocomposite membranes and their contribution for water treatment applications.
17 December 2020 in ACS Sustainable Chemistry & Engineering