Photocatalytic degradation is essential for the successful removal of organic contaminants from wastewater, which is important for ecological and environmental safety. The advanced oxidation process of photocatalysis has become a hot topic in recent years for the remediation of water. Cadmium sulphide (CdS) nanostructures doped with Titanium oxide (CdS/TiO2) nanocomposites has manufactured under ambient conditions using a simple and modified Chemical Precipitation technique. The nanocomposites crystal structure, thermal stability, recombination of photo-generated charge carriers, bandgap, surface morphology, particle size, molar ratio, and charge transfer properties are determined. The production of nanocomposites (CdS-TiO2) and their efficient photocatalytic capabilities are observed. The goal of the experiment is to improve the photocatalytic efficiency of TiO2 in the visible region by doping CdS nanocomposites. The results showed that as-prepared CdS-TiO2 nanocomposites has exhibited the highest photocatalytic activity in the process of photocatalytic degradation of AB-29 dye, and its degradation efficiency is 84%. After 1 h 30 min of visible light irradiation, while CdS and TiO2 showed only 68% and 09%, respectively. The observed decolorization rate of AB-29 is also higher in the case of CdS-TiO2 photocatalyst ~ 5.8 × 10−4mol L−1 min−1) as compared to the reported decolorization rate of CdS ~ 4.5 × 10−4mol L−1 min−1 and TiO2 ~ 0.67 × 10−4mol L−1 min−1. This increased photocatalytic effectiveness of CdS-TiO2 has been accomplished by reduced charge carrier recombination as a result of improved charge separation and extension of TiO2 in response to visible light.
Metal oxide nanoparticles (NPs) have found a variety of applications in numerous industrial, medical, and environmental fields s, attributable to recent advances in the nanotechnology field. Titanium dioxide nanoparticles (TiO 2 -NPs) have gained importance as metal oxide NPs due to their potential in various fields, particularly nanomedicine and other biomedicine fields. Several studies have confirmed that NPs produced via the biosynthesis route using natural resources have significant advantages such as fewer toxic contaminants, less subsequent complex chemical synthesis, environmental friendliness, cost-effectiveness, and stability when compared to NPs produced by conventional methods, and its production with controlled shapes and sizes. Therefore, considerable effort is being expended to implement biological synthesis methods with these proven advantages. TiO 2 -NPs can be made using a variety of biological, chemical, and physical methods. Physicochemical methods are costly, emit high levels of toxic chemicals into the atmosphere, and consume a lot of energy. On the other hand, the biological approach is an environmentally safe, cost-effective, dependable, convenient, and easy way to synthesize TiO 2 -NPs. In this review, the bio-mediated synthesis, as well as various biomedical applications of TiO 2 -NPs, were discussed.
MXene is a type of two-dimensional (2D) transition metal carbide and nitride, and its promising energy storage materials highlight its characteristics of high density, high metal-like conductivity, tunable terminals, and charge storage mechanisms known as pseudo-alternative capacitance. MXenes are a class of 2D materials synthesized by chemical etching of the A element in MAX phases. Since they were first discovered more than 10 years ago, the number of distinct MXenes has grown substantially to include numerous MnXn−1 (n = 1, 2, 3, 4, or 5), solid solutions (ordered and disordered), and vacancy solids. To date, MXenes used in energy storage system applications have been broadly synthesized, and this paper summarizes the current developments, successes, and challenges of using MXenes in supercapacitors. This paper also reports the synthesis approaches, various compositional issues, material and electrode topology, chemistry, and hybridization of MXene with other active materials. The present study also summarizes MXene’s electrochemical properties, applicability in pliant-structured electrodes, and energy storage capabilities when using aqueous/non-aqueous electrolytes. Finally, we conclude by discussing how to reshape the face of the latest MXene and what to consider when designing the next generation of MXene-based capacitors and supercapacitors.
Copper oxide (CuO) nanoparticles (NPs) were decorated on reduced graphene oxide (rGO) through the effective synthetic route method. Powder X-ray diffraction, Fourier transform infrared, ultraviolet-visible absorption, and scanning electron microscopy techniques were used to analyze the chemical structure, functional groups, absorbance, and morphology. Under visible light illumination, the CuO/rGO nanocomposites have higher catalytic activity compared to the bare CuO NPs which were suitable for degradation of methylene blue (MB) and Congo red (CR) dyes. According to the findings, the CuO/rGO nanocomposites possess excellent photocatalytic efficiency. Thus, the synthesized CuO/rGO nanocomposite is a promising photocatalyst for the deterioration of organic pollutants in water and wastewater treatment.
We improve the photocatalytic effect of Ag2S under visible light by using fullerene modified with Ag2S nanoparticles. Surface areas and pore volumes of the Ag2S–fullerene samples showed catastrophic decreases due to the deposition of Ag2S. The generation of reactive oxygen species was detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the photocatalytic effect increase in the case with the modified fullerene. In comparison with the separate effects of Ag2S and fullerene nanoparticles, the photocatalytic effect of the fullerene modified with Ag2S composites is increased significantly due to the synergetic effect between the fullerene and the Ag2S nanoparticles.