The efficient use of municipal waste is becoming increasingly important for sustainable environmental quality. An integral part of the process of recycling waste material is its quality sorting. Nowadays, both manual and automated sorting methods, especially optical sorting, are used worldwide for sorting mixed waste. This article presents the application of the NIR/VIS optical sorting system through a description of this processing equipment integrated into a specific plastic waste processing line. The aim of the article was to select the optimal mode of operation generally applicable to mixed waste, and, specifically, to compare the quality of sorting of plastic waste in automated and manual sorting modes. In order to compare the efficiency of the sorting system, significant parameters of the sorting process were proposed. The measurement of the plastic waste sorting purity parameter was based on data obtained by weighing selected control samples, and the evaluation of the results of these measurements showed, in particular, the dependence of the concerned parameter not only on the sorting mode, i.e., automated and manual, but also on the conveyor belt speed/waste material flow, on the pre-sorting methods and, in the case of manual sorting, on the operating shift. The subsequent economic assessment of both sorting processes clearly declared the investment in automated sorting systems in the optical system operation mode not only as profitable, but also as extremely advantageous both for the production economy and the environment.

Iron is an essential trace element, but at high doses, this element may pose a health risk. Wastewater from iron ore mining, steel production, and metal processing, among other heavy metals, also contains high concentrations of iron (Fe³⁺). The use of sorption on natural materials is a potential alternative to conventional methods for removing iron ions, also because of low cost. The methods presented in this article are based on the study of kinetic properties and the acquisition of adsorption isotherms, which are one of the most important characteristics of adsorption mechanisms. The course of sorption is analyzed according to the Freundlich sorption isotherm model. Isotherm parameters are evaluated using experimental results of ferric cation sorption. The results presented relate to the investigation of natural zeolite-clinoptilolite as a ferric cation sorbent, providing a measurement of the sorption kinetics as well as the observed sorption parameters of iron cations from aqueous media. The optimal time for equilibrium in the adsorption system is determined from the kinetic dependencies. The dependence of the achieved equilibrium concentration on the initial concentration of the solution was also expressed, both graphically and analytically. The new prediction model was compared with the traditional Freundlich model. Finally, adsorption isotherms tested under laboratory conditions for a practical application can be recommended for the preliminary examination of the possible technological use of natural zeolite in the wastewater treatment process.

Current demands on quality are the engine of searching for new progressive materials which should ensure enough durability in real conditions. Due to their mechanical properties, however, they cannot be applied to conventional machining methods. In respect to productivity, one of the methods is the finding of such machining technologies which allow achieving an acceptable lifetime of cutting tools with an acceptable quality of a machined surface. One of the mentioned technologies is trochoidal milling. Based on our previous research, where the effect of changing cutting conditions (cutting speed, feed per tooth, depth of cut) on tool lifetime was analysed, next, we continued with research on the influences of trochoid parameters on total machining force (step and engagement angle) as parameters adjustable in the CAM (computer-aided machining) system. The main contribution of this research was to create a mathematical-statistical model for the prediction of cutting force. This model allows setting up the trochoid parameters to optimize force load and potentially extend the lifetime of the cutting tool.

The impact of fillers in the epoxy oligomer on the test culture of the marine ecosystem was investigated. The content of additive—biocides—was selected based on the complex research using STAT-GRAPHICS^® Centurion XVI. The ecotoxicity of composite surfaces was determined in model systems using methods which are standard in eco-microbiology. The microorganism was identified by studying morphological, cultural, biochemical, and antigenic properties. Studies of the structure and the microrelief of the surfaces of composite materials were conducted using scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy. Based on comprehensive research, it was established that the composition of oxytetracycline with content of q = 1.5 wt% and nanosilver with a content of q = 0.075 wt% per 100 wt% of the DER-331 oligomer and 10 parts by the mass of the TETA hardener ensures the formation of a porous nano-heterogeneous structure of the coating, which leads to the acceleration of the release of silver ions from the surface of the polymer. The rational content of the complex additives of biocides ensures adhesion to the cell wall of bacteria with subsequent penetration into it and subsequent change to the cell membrane, its death, and, therefore, the suppression of the fouling process of metal structures.