Andreas Olk

Mr. Andreas Olk

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
AOAndreas Olk
Andreas Olk
PMPierre E. M. Macchi
Pierre E. M. Macchi
DPDavid A. Powell
David A. Powell
Printed circuit metasurfaces have attracted significant attention in the microwave community for their versatile wavefront manipulation capability. Despite their promising potential in telecommunications and radar applications, few transmissive metasurfaces have been reported operating at millimeter-wave frequencies. Several secondary effects including fabrication tolerances, interlayer near-field coupling and the roughness of conductors are more severe at such high frequencies and can cause significant performance degradation. Additionally, very accurate experimental techniques are required in order to characterise these effects. In this work, we present highly efficient refracting metasurfaces operating at 83 GHz. We use a synthesis technique that minimizes performance degradation due to effects such as interlayer near-field coupling and conductor roughness. Our experimental characterization includes an accurate determination of the intensity of all forward propagating Floquet harmonics in a broad frequency range. The experimental data shows very good agreement with full-wave simulation and verifies our synthesis method.

6 October 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
AFAshif Aminulloh Fathnan
Ashif Aminulloh Fathnan
AOAndreas Olk
Andreas Olk
DPDavid A Powell
David A Powell
Metasurfaces have emerged as a promising technology for the manipulation of electromagnetic waves within a thin layer. In planar ultrathin metasurfaces, there exist rigorous design methods, based on the equivalent surface impedance of patterned metallic layers on dielectric substrates. In this work, we derive a limit on bandwidth achievable in these metasurfaces, based on constraints that their meta-atoms should be passive, causal and lossless and that they should obey the time-bandwidth product rules of a single resonance structure. The results show that in addition to elementary design parameters involving variation of the surface impedance, the bandwidth is critically limited by the dielectric substrate thickness and permittivity. We then propose a synthesis method for broadband ultrathin metasurfaces, based on an LC resonance fit of the required surface impedance and experimentally verify a broadband dispersive structure at millimeter-wave frequencies. This results in a bandwidth enhancement of over 90%, relative to a reference metasurface created with the narrowband design process.

19 June 2020 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
AOAndreas Olk
Andreas Olk
DPDavid A. Powell
David A. Powell
Switched beam antennas provide an efficient and cost effective alternative to complex phased array and digital beam forming techniques. In this paper, we present the design and characterization of an electrically thin Huygens metasurface lens operating at 83GHz with high transmission efficiency and we demonstrate its applicability to switched beam antenna applications. We accurately characterize the 3D scattered field distribution and determine the focal length and transmission efficiency of the lens by near-field scanning. A model based on ideal Huygens sources is used to predict the focal performance, allowing the geometrical measurement parameters to be determined in advance. Finally, the ability of the lens to operate as a switched beam antenna is experimentally verified by exciting it with an omnidirectional waveguide antenna placed at different positions. The experimental results are in very good agreement with numerical simulations, showing steering angles up to 12° while keeping the side lobe level below −15dB.

15 September 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AOAndreas Olk
Andreas Olk
MLMingkai Liu
Mingkai Liu
DPDavid A. Powell
David A. Powell
Despite their great potential in communication and sensing applications, printed leaky-wave antennas have rarely been reported at millimeter-wave (mm-wave) frequencies. In this article, tapered leaky-wave antennas operating at 80 GHz are designed, fabricated, and experimentally characterized. While many continuous leaky-wave antennas use subwavelength strips or other comparably small elements, in this work, the surface impedance is discretized very coarsely using only three square patches per period. With this architecture, a wide range of surface reactance can be achieved while maintaining a minimum feature size of the metallic pattern that is feasible for printed circuit fabrication. Another advantage of this approach over existing works in the mm-wave frequency range is that it allows precise engineering of the aperture illumination. We demonstrate this by applying amplitude tapering for sidelobe suppression. A comprehensive experimental study is presented, including near- and far-field measurements. Therewith, we verify the designed aperture illumination and reveal the origin of spurious far-field features. Sidelobes are effectively suppressed and spurious radiation is reduced to -18 dB compared to the main lobe.

27 November 2025 in IEEE Transactions on Radar Systems
Verified
Journal Article
Open access
SMSeyedeh Fatemeh Mirhosseini
Seyedeh Fatemeh Mirhosseini
MAMohammad Alaee-Kerahroodi
Mohammad Alaee-Kerahroodi
AOAndreas Olk
Andreas Olk
USUdo Schroeder
Udo Schroeder
BRBhavani Shankar Mysore R
Bhavani Shankar Mysore R
In-car vital signs monitoring using millimeter-wave (mmWave) radar sensors has attracted growing interest due to its non-intrusive, real-time, and privacy-preserving nature. Leveraging the high-resolution capabilities of mmWave radar technology, this paper proposes non-contact detection of human presence and measurement of vital signs such as respiration and heartbeat within a vehicle cabin. A range of spectral analysis techniques—both parametric and nonparametric—are employed, including Fast Fourier Transform (FFT), Periodogram, Correlogram, ESPRIT (Estimation of signal parameters via rotational invariant techniques), MUSIC (Multiple Signal Classification), Nonlinear Least Squares (NLS), and the Iterative Adaptive Approach (IAA), to extract vital sign information with high precision. For real-time measurements, we utilize three radar platforms operating in the 60 GHz band: the BGT60LTR11AIP (Pulse-Doppler), the BGT60TR13C (SIMO), and the IWR6843ISK (MIMO). Experiments were conducted in diverse environments, including laboratory settings, on-road scenarios, and a custom test setup using a pump-embedded dummy to simulate infant vital signs. To distinguish living beings from inanimate objects, statistical features such as variance, entropy, and the Kolmogorov–Smirnov (KS) test are extracted and used as input to Support Vector Machine (SVM) and K-Nearest Neighbors (KNN) classifiers. The proposed solution is low-cost, privacy-preserving, and robust against environmental interference, making it ideal for integration into next-generation intelligent transportation systems.

1 January 2026 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
DSDipankar Saha
Dipankar Saha
AOAndreas Olk
Andreas Olk
LWLinlong Wu
Linlong Wu
BRBhavani Shankar Mysore Ramarao
Bhavani Shankar Mysore Ramarao