Ensuring the structural integrity and operational reliability of aero-engine compressors requires precise vibration measurement of rotating blades. Blade Tip Timing (BTT) is a widely used non-contact measurement technique, but its accuracy is inherently influenced by the blade’s twisted geometry and probe positioning. This study introduces a calibration framework that improves BTT precision by integrating Finite Element (FE) modeling to account for blade geometry and vibration characteristics. By extracting vibration mode shapes from the FE model and converting them into an equivalent measurement plane, this method enhances the reliability of BTT measurements. The calibration is validated using Laser Doppler Vibrometry (LDV), which serves as a high-precision reference in controlled laboratory conditions. Results show that this approach significantly reduces measurement discrepancies from 10% to a range of 2–3%, strengthening BTT’s robustness in industrial applications where LDV is not deployable. Additionally, the study establishes a crucial restriction on sensor positioning near the blade tip, identifying areas where BTT probes may fail to capture meaningful data depending on the mode shape. This work lays the foundation for standardized calibration methodologies in turbomachinery health monitoring, ultimately improving predictive maintenance strategies and diagnostics.
Thermal Energy harvesting intends to supply portable or wireline electrical appliances connected to a generator with the necessary power on the purpose of making them energy-independent. The implemented power values in this case are small; they range from Microwatt to Watt. This self-feeding process is an attempt to cope with the widespread energy-efficient electronic technologies of nowadays. Additionally, this study aims at recovering renewable micro-energy by means of the piezoelectric material and optimizing its efficiency by using Shape Memory Alloys (SMAs). This study sheds light upon the progress made on storage devices that are necessary to compensate for the intermittencies and the inadequacies that occur in the production and consumption of the generated electrical energy.
1 November 2024 in IEEE Transactions on Instrumentation and Measurement
Blade vibration testing is crucial for understanding the dynamic behavior of rotating machinery. This paper presents a theoretical analysis and experimental validation of electromagnetic excitation for blade vibration testing in static conditions. The study focuses on investigating the effect of electromagnets on static blades to establish a theoretical foundation. The Timoshenko beam theory is utilized to analyze the vibration parameters, including amplitude and frequency, while considering associated uncertainties. The theoretical analysis is complemented by numerical modeling using the finite element method and experimental measurements employing Laser Doppler Vibrometry (LDV). The results demonstrate the effectiveness of electromagnetic excitation in generating controlled vibrations in static blades. These findings provide valuable insights and serve as a basis for subsequent investigations into the behavior of blades during rotation. The mathematical model’s frequency estimation error was approximately 4% compared to numerical results, and the numerical amplitude results differed by 6.4% from the experimental measurements. These contributions enhance the understanding and design of blade vibration monitoring systems in rotating machinery and provide valuable information on the blade’s dynamic parameters for the calibration of blade tip timing systems.
14 September 2022 in Journal of Vibration Engineering & Technologies
The paper is a continuation of the previous presentation of the Anmena method for calculating blade vibration using the Blade Tip Timing system. The Anmena method represents an unconventional analytical approach and has therefore been subjected to extensive theoretical analyses. Despite its excellent reliability and accuracy especially near the so-called zero deviation axis, rare combinations with unsatisfactory results were identified. This new work is focused on assessing the practical aspects of the method on a real experimental device. For this purpose, the Laboratory of Rotational Laser Vibrometry at the Institute of Thermomechanics AS CR v.v.i. was used. The presented assessment of blade vibration by the method included several variants for calculation, therefore the paper is supplemented by the corresponding simulations which are able to describe in more detail the influence of critical factors as well as the challenges associated with multimode vibration analysis.