This paper reviews the application of ionic liquids to the deconstruction and fractionation of lignocellulosic biomass, in a process step that is commonly called pretreatment. It is divided into four parts: the first gives background information on lignocellulosic biomass and ionic liquids; the second focuses on the solubility of lignocellulosic biomass (and the individual biopolymers within it) in ionic liquids; the third emphasises the deconstruction effects brought about by the use of ionic liquids as a solvent; the fourth part deals with practical considerations regarding the design of ionic liquid based deconstruction processes.

Ground lignocellulosic biomass (Miscanthus giganteus, pine (Pinus sylvestris) and willow (Salix viminalis)) was pretreated with ionic liquid–water mixtures of 1-butyl-3-methylimidazolium methyl sulfate and 1-butyl-3-methylimidazolium hydrogen sulfate. A solid fraction enriched in cellulose was recovered, which was subjected to enzymatic hydrolysis. Up to 90% of the glucose and 25% of the hemicellulose contained in the original biomass were released by the combined ionic liquid pretreatment and the enzymatic hydrolysis. After the pretreatment, the ionic liquid liquor contained the majority of the lignin and the hemicellulose. The lignin portion was partially precipitated from the liquor upon dilution with water. The amount of hemicellulose monomers in the ionic liquid liquor and their conversion into furfurals was also examined. The performance of ionic liquid–water mixtures containing 1,3-dialkylimidazolium ionic liquids with acetate, methanesulfonate, trifluoromethanesulfonate and chloride anions was investigated. The applicability of the ionic liquid 1-butylimidazolium hydrogensulfate for lignocellulose pretreatment was also examined. It was found that ionic liquid liquors containing methyl sulfate, hydrogen sulfate and methanesulfonate anions were most effective in terms of lignin/cellulose fractionation and enhancement of cellulose digestibility.

The effect of the anion of ionic liquids on air-dried pine (Pinus radiata) has been investigated. All ionic liquids used in this study contained the 1-butyl-3-methylimidazolium cation; the anions were trifluoromethanesulfonate, methylsulfate, dimethylphosphate, dicyanamide, chloride and acetate. Using a protocol for assessing the ability to swell small wood blocks (10 × 10 × 5 mm), it was shown that the anion has a profound impact on the ability to promote both swelling and dissolution of biomass. Time course studies showed that viscosity, temperature and water content were also important parameters influencing the swelling process. We used Kamlet–Taft parameters to quantify the solvent polarity of the ionic liquids and found that the anion basicity described by the parameter β correlated with the ability to expand and dissolve pine lignocellulose. It is shown that 1-butyl-3-methylimidazolium dicyanamide dissolves neither cellulose nor lignocellulosic material.

Softwood is an abundantly available feedstock for the bio-based industry. However, achieving cost-effective sugar release is particularly challenging, owing to its guaiacyl-only lignin. Here, we report the highly effective pretreatment of the softwood pine (Pinus sylvestris) using ionoSolv pretreatment, a novel ionic liquid-based lignocellulose fractionation technology. Three protic, low-cost ionic liquids, 1-butylimidazolium hydrogen sulfate, triethylammonium hydrogen sulfate and N,N-dimethylbutylammonium hydrogen sulfate, were used to fractionate the biomass into a carbohydrate-rich pulp and a lignin. The carbohydrate-rich pulp was hydrolysed into fermentable sugars by enzymatic saccharification. Under the most successful pretreatment conditions, quantitative glucose release from the pulp was achieved, which equates to a projected glucose release of 464 mg per gram of pine wood entering the process. We further intensified the process by increasing the solid to solvent ratio up to 1 : 2 g g⁻¹ while maintaining saccharification yields of 75% of the theoretical maximum. We also demonstrate for the first time that N,N-dimethylbutylammonium hydrogen sulfate, [DMBA][HSO₄], is an excellent low-cost pretreatment solvent, surpassing the pretreatment effectiveness of its symmetrically substituted analogue triethylammonium hydrogen sulfate. This shows that ionoSolv pretreatment with protic hydrogen sulfate ionic liquids is a truly feedstock-independent pretreatment option, further increasing the commercial potential of this pretreatment technology.

Deconstruction with low-cost ionic liquids (ionoSolv) is a promising method to pre-condition lignocellulosic biomass for the production of renewable fuels, materials and chemicals. This study investigated process intensification strategies for ionoSolv pretreatment of Miscanthus × giganteus with the low-cost ionic liquid triethylammonium hydrogen sulfate ([TEA][HSO₄]) in the presence of 20 wt% water, using high temperatures and a high solid to solvent loading of 1 : 5 g/g. The temperatures investigated were 150, 160, 170 and 180 °C. We discuss the effect of pretreatment temperature on lignin and hemicellulose removal, cellulose degradation and enzymatic saccharification yields. We report that very good fractionation can be achieved across all investigated temperatures, including an enzymatic saccharification yield exceeding 75% of the theoretical maximum after only 15 min of treatment at 180 °C. We further characterised the recovered lignins, which established some tunability of the hydroxyl group content, subunit composition, connectivity and molecular weight distribution in the isolated lignin while maintaining maximum saccharification yield. This drastic reduction of pretreatment time at increased biomass loading without a yield penalty is promising for the development of a commercial ionoSolv pretreatment process.