A microbial fuel cell (MFC) is a potentially viable renewable energy option which promises effective and commercial harvesting of electrical power by bacterial movement and at the same time also treats wastewater. Microbial fuel cells are complicated devices and therefore research in this field needs interdisciplinary knowledge and involves diverse areas such as biological, chemical, electrical, etc. In recent decades, rapid strides have taken place in fuel cell research and this technology has become more efficient. For effective usage, such devices need advanced control techniques for maintaining a balance between substrate supply, mass, charge, and external load. Most of the research work in this area focuses on experimental work and have been described from the design perspective. Recently, the development in mathematical modeling of such cells has taken place which has provided a few mathematical models. Mathematical modeling provides a better understanding of the operations and the dynamics of MFCs, which will help to develop control and optimization strategies. Control-oriented bio-electrochemical models with mass and charge balance of MFCs facilitate the development of advanced nonlinear controllers. This work reviews the different mathematical models of such cells available in the literature and then presents suitable parametrization to develop control-oriented bio-electrochemical models of three different types of cells with their uncertain parameters.
19 August 2020 in IEEE Transactions on Industrial Informatics
The present study proposes an alternate approach following command-filtered backstepping principle to control the terminal voltage and stabilise the speed of a diesel generator through the excitation system. This controller eliminates the errors introduced due to differentiation of input signal and is therefore better compared to the conventional backstepping control technique. The global stability conditions of the overall closed-loop system are established using Lyapunov criteria. The parameters of the controller are optimised using a comprehensive learning particle swarm optimisation (CLPSO) technique. The performance of the proposed controller is compared with two other controllers, which include a classical proportional integral derivative(PID) and Delta Sigma-based PID controllers. The performance comparison using percentage overshoot and settling time demonstrate that the proposed controller is superior and could effectively control the terminal voltage and stabilise the speed under various fault conditions.
This paper proposes an adaptive integral back-stepping control scheme for tracking control of 2-DOF (Degree of Freedom) helicopter. The helicopter is an important model from the control prospective due to its nonlinear behavior, highly cross coupling effects and instability in open loop. Classical control methods (PI, PD and PID Controllers) and baseline controllers with a linear quadratic regulator (LQR) are unable to handle parametric uncertainties and unmodeled dynamics. The key advantage of the proposed scheme is that it gives robustness to parameter uncertainties and unmodeled dynamics. An adaptive update can provide system robustness through estimation of parameters and model uncertainties. Simulation and Experimental results support the expected effectiveness of the proposed adaptive integral backstepping scheme for tracking as compared to the baseline controller (LQR) in presence of uncertainties.