Chuanrong Li

Chuanrong Li


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2018 in International Journal of Remote Sensing
Verified
Journal Article
Closed access
CGCaixia Gao
Caixia Gao
SQShi Qiu
Shi Qiu
CLChuanrong Li
Chuanrong Li
LTLingli Tang
Lingli Tang
LMLingling Ma
Lingling Ma
LRLu Ren
Lu Ren
Land surface temperature (LST) is a key parameter in the physics of land surface processes on a regional and global scale, as it combines the results of all surface–atmospheric interactions and energy fluxes between the atmosphere and the ground. Due to discrepancies in retrieval methods, input parameters, and sensor characteristics, various LST products are different from each other. As one of the important LST contributors, the operational LST product from the visible and infrared radiometer (VIRR) onboard Feng Yun 3C satellite (denoted as VIRR LST1) has not been comprehensively assessed, and the detailed LST retrieval accuracy is still unknown to the public. Taking this into consideration, a new group of VIRR LST (denoted as VIRR LST2) was derived using a generalized split-window method for operational use. Therefore, this study aimed to evaluate the consistency between VIRR LST1 and VIRR LST2 in detail using the LSTs derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Spinning Enhanced Visible and Infrared Imager (SEVIRI) data over the study area (from 11° W to 2° E and 32° N to 44° N). Several LST images in different seasons were used and registered in space, viewing time, and viewing geometry. After that, the LST differences in day-variation, land-cover types, and viewing zenith angles (VZAs) were also investigated. The results indicate that the differences between VIRR LST1 (or VIRR LST2) and MODIS LST were within 2.80 K, and the corresponding values between VIRR LST1 (or VIRR LST2) and SEVIRI LST were within 3.30 K. The VIRR LST1 was always underestimated, and VIRR LST2 was overestimated during the exuberant vegetation day. Furthermore, the mean differences between VIRR LST1 (or VIRR LST2) and MODIS LST for bare soil were larger than those for vegetation since the land surface emissivity for bare soil was often not well produced. On the other hand, the variation was not pronounced when comparing VIRR LST1 (or VIRR LST2) and SEVIRI LST, which could be caused by many more mixed pixels in the SEVIRI data set. In addition, the LST differences seemed to VZA dependent.

28 October 2010
Verified
Conference Paper
Closed access
PDF file
CCChangyong Cao
Changyong Cao
LMLingling Ma
Lingling Ma
SUSirish Uprety
Sirish Uprety
CLChuanrong Li
Chuanrong Li
LTLingli Tang
Lingli Tang
There is a great need to establish satellite instrument calibration consistency using vicarious calibration sites with wellknown spectral and radiometric characteristics. The Dunhuang calibration/validation site located in the Gobi desert, China, and the Dome C in the Antarctic are two of the eight reference sites endorsed by the Committee on Earth Observation Satellites (CEOS) Working Group on Cal/Val (WGCV). This paper presents results of the spectral characterization of the Dunhuang calibration/validation site using hyperspectral measurements. Its spectra are compared with those from the Dome C, as well as with ground sample measurements with radiative transfer calculations. Further comparisons are made with the spectra obtained by the HSI on China's HJ-1A environmental satellite. The results show that the Dunhuang and Dome C sites have distinct spectral characteristics that complement each other for satellite instrument calibration in the reflective solar bands. This study is part of the collaboration effort by the CEOS/WGCV towards consistent satellite observations for the global earth observation system of systems (GEOSS).

19 November 2014
Verified
Conference Paper
Closed access
CGCaixia Gao
Caixia Gao
LMLingling Ma
Lingling Ma
YLYaokai Liu
Yaokai Liu
NWNing Wang
Ning Wang
YQYonggang Qian
Yonggang Qian
CLChuanrong Li
Chuanrong Li
Dynamic range and response linearity are two key parameters for impacting the quality of remote sensing image and subsequently the quantitative applications. Due to the space radiation and the degrading of electronic devices, the inflight dynamic range and response linearity of remote sensing payload are subject to change, and is essential to be assessed. Therefore, in this paper, with the aid of the permanent artificial target located in the AOE Baotou site in China, the two parameters for pan-chromatic camera (Pan) and the multi-spectral camera (Band 1-4) onboard GF-1 satellite are assessed with an extrapolation method using the in situ measurements and corresponding images acquired on November 4, 2013. The results show that the low point of the dynamic range for Pan band, Band 1, Band2, Band3 and Band4 is -24.08 W•sr-1m-2μm-1, -52.22 W•sr-1m-2μm-1, -35.20 W•sr-1m-2μm-1, -31.92 W•sr-1m-2μm-1, -24.07 W•sr-1m-2μm- 1 respectively; while the corresponding high point is 271.77 W•sr-1m-2μm-1, 401.58 W•sr-1m-2μm-1, 287.46 W•sr-1m- 2μm-1, 237.33W•sr-1m-2μm-1, 307.49W•sr-1m-2μm-1, respectively; meanwhile, it is demonstrated that all the sensors have a response linearity error of lower than 1%. Moreover, an analysis for this assessment is performed in terms of the uncertainties for surface reflectance measurement (1%), aerosol optical depth (10%), column water vapor (10%), MODTRAN model (1%) and solar irradiance (1%) using a simulation method with the aid of MODTRAN 4.0 model, and a total uncertainty of 2.12% is acquired.

1 January 2018
Verified
Conference Paper
Closed access
QWQi Wang
Qi Wang
HXHong Xu
Hong Xu
LMLingling Ma
Lingling Ma
CLChuanrong Li
Chuanrong Li
YZYongsheng Zhou
Yongsheng Zhou
LTLingli Tang
Lingli Tang
The existing algorithms to reconstruct hyperspectral compressive sensing images mainly use the sparse property of spatial information and some simple non-adaptive spectral constraint such as the low-rank property. However, these strategies cannot remove the spectral redundancy efficiently and a new method to make full use of the abundant redundancy of spectral information and improve the quality for hyperspectral CS reconstruction is necessary. A new CS sampling and reconstruction model based on spectral sparse representation was proposed in this paper. The spectral sparse dictionary was constructed from training samples to enhance the effect of sparse representation and the total variation constraint of spatial images was also considered to further enhance the precision during the reconstruction. The experiment to reconstruct AVIRIS hyperspectral images of 200 bands show that the hyperspectral image was almost perfectly reconstructed at 25% sampling rate and the spatial and spectral

30 October 2009
Verified
Conference Paper
Closed access
PDF file
ZLZhaoyan Liu
Zhaoyan Liu
RLRan Li
Ran Li
XXXiaohuan Xi
Xiaohuan Xi
LTLingli Tang
Lingli Tang
CLChuanrong Li
Chuanrong Li
LiDAR (Light Detection and Ranging) can provide accurate remote sensing data for extracting surface information, and large footprint LiDAR has demonstrated great potential for accurately measuring forest canopy characteristics, which are important for regional and global climate change studies. In this study the Geometric Optical Model, Radiative Transfer Model and hotspot condition are used to explore the relationship between canopy structure and large footprint LiDAR return waveforms. A simplified model was simulated, and detailed analysis was made. The model was improved by adding an extinction coefficient and a scatter coefficient, and then some simplified parameters are introduced to the model. The new 3D model is simulated by considering the characteristics of large footprint LiDAR and forest stand. The experiment results show that terrain slop can influence LiDAR return waveform shapes greatly, while tree height just affects the starting position of waveforms, and the effects of terrain slop and extinction is reduced obviously. The new model was validated with field data of Changbai Mountain, and the results have good agreement with GLAS data, and relatively, the improved model and simulation of waveform fit the actual return waveform of large footprint LiDAR system.

5 October 2017
Verified
Conference Paper
Closed access
PDF file
YZYongguang Zhao
Yongguang Zhao
LTLingli Tang
Lingli Tang
NWNing Wang
Ning Wang
YQYonggang Qian
Yonggang Qian
CZChuncheng Zhou
Chuncheng Zhou
CLChuanrong Li
Chuanrong Li
Time series of satellite reflectance data have been widely used to characterize environmental phenomena, describe trends in vegetation dynamics and study climate change. However, several sensors with wide spatial coverage and high observation frequency are usually designed to have large field of view (FOV), which cause variations in the sun-targetsensor geometry in time-series reflectance data. In this study, on the basis of semiempirical kernel-driven BRDF model, a new semi-empirical model was proposed to normalize the sun-target-sensor geometry of remote sensing image. To evaluate the proposed model, bidirectional reflectance under different canopy growth conditions simulated by Discrete Anisotropic Radiative Transfer (DART) model were used. The semi-empirical model was first fitted by using all simulated bidirectional reflectance. Experimental result showed a good fit between the bidirectional reflectance estimated by the proposed model and the simulated value. Then, MODIS time-series reflectance data was normalized to a common sun-target-sensor geometry by the proposed model. The experimental results showed the proposed model yielded good fits between the observed and estimated values. The noise-like fluctuations in time-series reflectance data was also reduced after the sun-target-sensor normalization process.