Vicarious calibration approaches using in situ measurements saw first use in the early 1980s and have since improved to keep pace with the evolution of the radiometric requirements of the sensors that are being calibrated. The advantage of in situ measurements for vicarious calibration is that they can be carried out with traceable and quantifiable accuracy, making them ideal for interconsistency studies of on-orbit sensors. The recent development of automated sites to collect the in situ data has led to an increase in the available number of datasets for sensor calibration. The current work describes the Radiometric Calibration Network (RadCalNet) that is an effort to provide automated surface and atmosphere in situ data as part of a network including multiple sites for the purpose of optical imager radiometric calibration in the visible to shortwave infrared spectral range. The key goals of RadCalNet are to standardize protocols for collecting data, process to top-of-atmosphere reflectance, and provide uncertainty budgets for automated sites traceable to the international system of units. RadCalNet is the result of efforts by the RadCalNet Working Group under the umbrella of the Committee on Earth Observation Satellites (CEOS) Working Group on Calibration and Validation (WGCV) and the Infrared Visible Optical Sensors (IVOS). Four radiometric calibration instrumented sites located in the USA, France, China, and Namibia are presented here that were used as initial sites for prototyping and demonstrating RadCalNet. All four sites rely on collection of data for assessing the surface reflectance as well as atmospheric data over that site. The data are converted to top-of-atmosphere reflectance within RadCalNet and provided through a web portal to allow users to either radiometrically calibrate or verify the calibration of their sensors of interest. Top-of-atmosphere reflectance data with associated uncertainties are available at 10 nm intervals over the 400 nm to 1000 nm spectral range at 30 min intervals for a nadir-viewing geometry. An example is shown demonstrating how top-of-atmosphere data from RadCalNet can be used to determine the interconsistency between two sensors.

Climate observations and their applications require measurements with high stability and low uncertainty in order to detect and assess climate variability and trends. The difficulty with space-based observations is that it is generally not possible to trace them to standard calibration references when in orbit. In order to overcome this problem, it has been proposed to deploy space-based radiometric reference systems which intercalibrate measurements from multiple satellite platforms. Such reference systems have been strongly recommended by international expert teams. This paper describes the Chinese Space-based Radiometric Benchmark (CSRB) project which has been under development since 2014. The goal of CSRB is to launch a reference-type satellite named LIBRA in around 2025. We present the roadmap for CSRB as well as requirements and specifications for LIBRA. Key technologies of the system include miniature phase-change cells providing fixed-temperature points, a cryogenic absolute radiometer, and a spontaneous parametric down-conversion detector. LIBRA will offer measurements with SI traceability for the outgoing radiation from the Earth and the incoming radiation from the Sun with high spectral resolution. The system will be realized with four payloads, i.e., the Infrared Spectrometer (IRS), the Earth-Moon Imaging Spectrometer (EMIS), the Total Solar Irradiance (TSI), and the Solar spectral Irradiance Traceable to Quantum benchmark (SITQ). An on-orbit mode for radiometric calibration traceability and a balloon-based demonstration system for LIBRA are introduced as well in the last part of this paper. As a complementary project to the Climate Absolute Radiance and Refractivity Observatory (CLARREO) and the Traceable Radiometry Underpinning Terrestrial- and Helio- Studies (TRUTHS), LIBRA is expected to join the Earth observation satellite constellation and intends to contribute to space-based climate studies via publicly available data.

Vicarious calibration and validation techniques are important tools to ensure the long-term stability and inter-sensor consistency of satellite sensors making observations in the solar-reflective spectral domain. Automated test sites, which have continuous in situ monitoring of both ground reflectance and atmospheric conditions, can greatly increase the match-up possibilities for a wide range of space agency and commercial sensors. The Baotou calibration and validation test site in China provides operational high-accuracy and high-stability vicarious calibration and validation for high spatial resolution solar-reflective remote-sensing sensors. Two sites, given the abbreviations BTCN (an artificial site) and BSCN (a natural sandy site), have been selected as reference sites for the Committee on Earth Observation Satellites radiometric calibration network (RadCalNet). RadCalNet requires sites to provide data in a consistent format but does not specify the required operational conditions for a RadCalNet site. The two Baotou sites are the only sites to date that make spectral measurements for their continuous operation. One of the core principles of RadCalNet is that each site should have a metrologically rigorous uncertainty budget which also describes the site’s traceability to the international system of units, the SI. This paper shows a formalized metrological approach to determining and documenting the uncertainty budget and traceability of a RadCalNet site. This approach follows the Guide to the Expression of Uncertainty in Measurement. The paper describes the uncertainty analysis for bottom-of-atmosphere and top-of-atmosphere reflectance in the spectral region from 400 to 1000 nm for the Baotou sites and gives preliminary results for the uncertainty propagating this to top-of-atmosphere reflectance.

Unregulated livestock breeding and grazing can degrade grasslands and damage the ecological environment. The combination of remote sensing and artificial intelligence techniques is a more convenient and powerful means to acquire livestock information in a large area than traditional manual ground investigation. As a mainstream remote sensing platform, unmanned aerial vehicles (UAVs) can obtain high-resolution optical images to detect grazing livestock in grassland. However, grazing livestock objects in UAV images usually occupy very few pixels and tend to gather together, which makes them difficult to detect and count automatically. This paper proposes the GLDM (grazing livestock detection model), a lightweight and high-accuracy deep-learning model, for detecting grazing livestock in UAV images. The enhanced CSPDarknet (ECSP) and weighted aggregate feature re-extraction pyramid modules (WAFR) are constructed to improve the performance based on the YOLOX-nano network scheme. The dataset of different grazing livestock (12,901 instances) for deep learning was made from UAV images in the Hadatu Pasture of Hulunbuir, Inner Mongolia, China. The results show that the proposed method achieves a higher comprehensive detection precision than mainstream object detection models and has an advantage in model size. The $mAP$ of the proposed method is 86.47%, with the model parameter 5.7 M. The average recall and average precision can be above 85% at the same time. The counting accuracy of grazing livestock in the testing dataset, when converted to a unified sheep unit, reached 99%. The scale applicability of the model is also discussed, and the GLDM could perform well with the image resolution varying from 2.5 to 10 cm. The proposed method, the GLDM, was better for detecting grassland grazing livestock in UAV images, combining remote sensing, AI, and grassland ecological applications with broad application prospects.

Aboveground biomass (AGB) is an important indicator of the grassland ecosystem. It can be used to evaluate the grassland productivity and carbon stock. Satellite remote sensing technology is useful for monitoring the dynamic changes in AGB across a wide range of grasslands. However, due to the scale mismatch between satellite observations and ground surveys, significant uncertainties and biases exist in mapping grassland AGB from satellite data. This is also a common problem in low- and medium-resolution satellite remote sensing modeling that has not been effectively solved. The rapid development of uncrewed aerial vehicle (UAV) technology offers a way to solve this problem. In this study, we developed a method with UAV and satellite synergies for estimating grassland AGB that filled the gap between satellite observation and ground surveys and successfully mapped the grassland AGB in the Hulunbuir meadow steppe in the northeast of Inner Mongolia, China. First, based on the UAV hyperspectral data and ground survey data, the UAV-based AGB was estimated using a combination of typical vegetation indices (VIs) and the leaf area index (LAI), a structural parameter. Then, the UAV-based AGB was aggregated as a satellite-scale sample set and used to model satellite-based AGB estimation. At the same time, spatial information was incorporated into the LAI inversion process to minimize the scale bias between UAV and satellite data. Finally, the grassland AGB of the entire experimental area was mapped and analyzed. The results show the following: (1) random forest (RF) had the best performance compared with simple regression (SR), partial least squares regression (PLSR) and back-propagation neural network (BPNN) for UAV-based AGB estimation, with an R² of 0.80 and an RMSE of 76.03 g/m². (2) Grassland AGB estimation through introducing LAI achieved higher accuracy. For UAV-based AGB estimation, the R² was improved by an average of 10% and the RMSE was reduced by an average of 9%. For satellite-based AGB estimation, the R² was increased from 0.70 to 0.75 and the RMSE was decreased from 78.24 g/m² to 72.36 g/m². (3) Based on sample aggregated UAV-based AGB and an LAI map, the accuracy of satellite-based AGB estimation was significantly improved. The R² was increased from 0.57 to 0.75, and the RMSE was decreased from 99.38 g/m² to 72.36 g/m². This suggests that UAVs can bridge the gap between satellite observations and field measurements by providing a sufficient training dataset for model development and AGB estimation from satellite data.