In recent years, solar energy technologies have developed an emerging edge. The incessant research to develop a power source alternative to fossil fuel because of its scarcity and detrimental effects on the environment is the main driving force. In addition, nanofluids have gained immense interest as superior heat transfer fluid in solar technologies for the last decades. In this research, a binary solution of ionic liquid (IL) + water based ionanofluids is formulated successfully with two dimensional MXene (Ti₃C₂) nano additives at three distinct concentrations of 0.05, 0.10, and 0.20 wt % and the optimum concentration is used to check the performance of a hybrid solar PV/T system. The layered structure of MXene and high absorbance of prepared nanofluids have been perceived by SEM and UV–vis respectively. Rheometer and DSC are used to assess the viscosity and heat capacity respectively while transient hot wire technique is engaged for thermal conductivity measurement. A maximum improvement of 47% in thermal conductivity is observed for 0.20 wt % loading of MXene. Furthermore, the viscosity is found to rise insignificantly with addition of Ti₃C₂ by different concentrations. Conversely, viscosity decreases substantially as the temperature increases from 20 °C to 60 °C. However, based on their thermophysical properties, 0.20 wt % is found to be the optimum concentration. A comparative analysis in terms of heat transfer performance with three different nanofluids in PV/T system shows that, IL+ water/MXene ionanofluid exhibits highest thermal, electrical, and overall heat transfer efficiency compared to water/alumina, palm oil/MXene, and water alone. Maximum electrical efficiency and thermal efficiency are recorded as 13.95% and 81.15% respectively using IL + water/MXene, besides that, heat transfer coefficients are also noticed to increase by 12.6% and 2% when compared to water/alumina and palm oil/MXene respectively. In conclusion, it can be demonstrated that MXene dispersed ionanofluid might be great a prospect in the field of heat transfer applications since they can augment the heat transfer rate considerably which improves system efficiency.

The current research focuses on formulating a new class of Therminol55-based nanofluids that incorporates an MXene/Al₂O₃ nanocomposite as the new class of dispersant at three different concentrations of 0.05, 0.10, and 0.20 wt%. The optical and thermophysical properties of the formulated nanofluid are assessed experimentally. Zeta potential and FTIR analyses are employed to evaluate the composite particles' surface charge and chemical stability, respectively. Thermal conductivity is observed to increase with nanoparticle loading and maximally augmented by 61.8% for 0.20 wt%, whereas dynamic viscosity increased with adding nanoparticles but remarkably dropped with increasing temperature. In addition, the prepared TH55/MXene + Al₂O₃ samples are thermally stable up to 200 °C according to TGA analyses. Moreover, the proposed correlations for the thermal conductivity and viscosity showed good agreement with the experimental data. The study’s findings suggest that the formulated nanofluid could be a viable contender to be used as a heat transfer fluid in the thermal sector.

This study examines the impact of varying the porosity density of twisted tape inserts (TTI) on the temperature distribution, fluid velocities, heat transfer coefficients (HTC), Nusselt numbers (Nu), turbulent kinetic energy (TKE), and performance from 5000 to 12500 Reynolds numbers (Re). The entire process involved the design of TTIs and double pipe heat exchangers using SolidWorks. Subsequently, a three-dimensional fluid flow model was employed to solve equations related to energy mass, energy, and momentum within the ANSYS Fluent interfaces. The findings highlight the noteworthy impact of high porosity TTIs, which consistently reduce temperature spans, increase fluid velocities, and greatly HTC and Nu when compared to low porosity TTI, typical TTI, and plain tubes. Furthermore, high porosity TTI significantly increases TKE, indicating increased fluid turbulence and higher heat transfer efficiency, especially at Re = 12500. The assessment of PEC emphasizes the superiority of high porosity TTI, demonstrating their significant performance increase potential of over 6.44 % over low porosity TTI and a staggering 62.5 % above typical TTI. In conclusion, high porosity TTI emerges as a potential solution for improving heat transfer efficiency and overall system performance in a variety of industrial applications, promising enhanced energy efficiency and superior performance.

Nanofluids are identified as advanced working fluids in the solar energy conversion field with superior heat transfer characteristics. This research work introduces carbon-based diamond nanomaterial and Therminol^®55 oil-based nanofluids for implementation in a concentrated photovoltaic/thermal (CPV/T) solar collector. This study focuses on the experimental formulation, characterization of properties, and performance evaluation of the nanofluid-based CPV/T system. Thermo-physical (thermal conductivity, viscosity, and rheology), optical (UV-vis and FT-IR), and stability (Zeta potential) properties of the formulated nanofluids are characterized at 0.001–0.1 wt.% concentrations of dispersed particles using experimental assessment. The maximum photo-thermal energy conversion efficiency of the base fluid is improved by 120.80% at 0.1 wt.%. The thermal conductivity of pure oil is increased by adding the nanomaterial. The highest enhancement of 73.39% is observed for the TH-55/DP nanofluid. Furthermore, dynamic viscosity decreased dramatically across the temperature range studied (20–100 °C), and the nanofluid exhibited dominant Newtonian flow behavior, with viscosity remaining nearly constant up to a shear rate of 100 s⁻¹. Numerical simulations of the nanofluid-operated CPV/T collector have disclosed substantial improvements. At a concentrated solar irradiance of 5000 W/m² and an optimal flow rate of 3 L/min, the highest thermal and electrical energy conversion efficiency enhancements are found to be 11 and 1.8%, respectively.