In recent years, solar energy technologies have developed an emerging edge. The incessant research to develop a power source alternative to fossil fuel because of its scarcity and detrimental effects on the environment is the main driving force. In addition, nanofluids have gained immense interest as superior heat transfer fluid in solar technologies for the last decades. In this research, a binary solution of ionic liquid (IL) + water based ionanofluids is formulated successfully with two dimensional MXene (Ti₃C₂) nano additives at three distinct concentrations of 0.05, 0.10, and 0.20 wt % and the optimum concentration is used to check the performance of a hybrid solar PV/T system. The layered structure of MXene and high absorbance of prepared nanofluids have been perceived by SEM and UV–vis respectively. Rheometer and DSC are used to assess the viscosity and heat capacity respectively while transient hot wire technique is engaged for thermal conductivity measurement. A maximum improvement of 47% in thermal conductivity is observed for 0.20 wt % loading of MXene. Furthermore, the viscosity is found to rise insignificantly with addition of Ti₃C₂ by different concentrations. Conversely, viscosity decreases substantially as the temperature increases from 20 °C to 60 °C. However, based on their thermophysical properties, 0.20 wt % is found to be the optimum concentration. A comparative analysis in terms of heat transfer performance with three different nanofluids in PV/T system shows that, IL+ water/MXene ionanofluid exhibits highest thermal, electrical, and overall heat transfer efficiency compared to water/alumina, palm oil/MXene, and water alone. Maximum electrical efficiency and thermal efficiency are recorded as 13.95% and 81.15% respectively using IL + water/MXene, besides that, heat transfer coefficients are also noticed to increase by 12.6% and 2% when compared to water/alumina and palm oil/MXene respectively. In conclusion, it can be demonstrated that MXene dispersed ionanofluid might be great a prospect in the field of heat transfer applications since they can augment the heat transfer rate considerably which improves system efficiency.

MXenes with their wide range of tunability and good surface chemistry provide unique and distinctive characteristics offering potential employment in various aspects of energy management applications. These high-performance materials have attracted considerable attention in recent decades due to their outstanding characteristics. In the literature, most of the work is related to specific methods for the preparation of MXenes. In this Review, we present a detailed discussion on the synthesis of MXenes through different etching routes involving acids, such as hydrochloric acid, hydrofluoric acid, and lithium fluoride, and non-acidic alkaline solution, electrochemical, and molten salt methods. Furthermore, a concise overview of the different structural, optical, electronic, and magnetic properties of MXenes is provided corresponding to their role in supporting high thermal, chemical, mechanical, environmental, and electrochemical stability. Additionally, the role of MXenes in maintaining the thermal management performance of photovoltaic thermal systems (PV/T), wearable light heaters, solar water desalination, batteries, and supercapacitors is also briefly discussed. A techno-economic and life cycle analysis of MXenes is provided to analyze their sustainability, scalability, and commercialization to facilitate a comprehensive array of energy management systems. Lastly, the technology readiness level of MXenes is defined, and future recommendations for MXenes are provided for their further utilization in niche applications. The present work strives to link the chemistry of MXenes to process economics for energy management applications.

Since technology progresses, the need to optimize the thermal system’s heat transfer efficiency is continuously confronted by researchers. A primary constraint in the production of heat transfer fluids needed for ultra-high performance was its intrinsic poor heat transfer properties. MXene, a novel 2D nanoparticle possessing fascinating properties has emerged recently as a potential heat dissipative solute in nanofluids. In this research, 2D MXenes (Ti₃C₂) are synthesized via chemical etching and blended with a binary solution containing Diethylene Glycol (DEG) and ionic liquid (IL) to formulate stable nanofluids at concentrations of 0.1, 0.2, 0.3 and 0.4 wt%. Furthermore, the effect of different temperatures on the studied liquid’s thermophysical characteristics such as thermal conductivity, density, viscosity, specific heat capacity, thermal stability and the rheological property was experimentally conducted. A computational analysis was performed to evaluate the impact of ionic liquid-based 2D MXene nanofluid (Ti₃C₂/DEG+IL) in hybrid photovoltaic/thermal (PV/T) systems. A 3D numerical model is developed to evaluate the thermal efficiency, electrical efficiency, heat transfer coefficient, pumping power and temperature distribution. The simulations proved that the studied working fluid in the PV/T system results in an enhancement of thermal efficiency, electrical efficiency and heat transfer coefficient by 78.5%, 18.7% and 6%, respectively.

Covalent functionalization (CF-GNPs) and non-covalent functionalization (NCF-GNPs) approaches were applied to prepare graphene nanoplatelets (GNPs).

Inhibitors have evolved from their primary function of controlling swelling during hydraulic fracturing processes in shale reservoirs. This study provides a comprehensive review of recent deep eutectic solvent (DES) advancements as inhibitors in swelling inhibition techniques. The swelling inhibitory potentials and mechanisms of DESs have been studied analytically and compared to existing conventional inhibitors. The functional effects of concentration, temperature, and types of DES are explored. Data on the effect of DES on rheology, swelling, zeta potential, shale cutting recovery, surface tension, particle size distribution, XRD, and FTIR analyses are presented. Along with preparation procedures, environmental concerns and applications of DESs in several fields are discussed. This study suggests that DESs are preferable swelling inhibitors due to their inhibitory performance, cost-effectiveness, and environmental friendliness. Moreover, this review includes guidelines and recommendations for selecting and designing DES to inhibit swelling more effectively.