The high-temperature deformation behavior of metals and alloys undergoes complex mechanisms depending on the deformation conditions. The microstructure and mechanical properties after deformation are important factors that determine the strength and durability of the final product. Therefore, many studies to predict the microstructure and mechanical properties have been conducted. In this regard, numerous mathematical approaches for predicting microstructure and flow stress have been proposed over the past half century. Accordingly, many advances have been made in the field of material science. Nevertheless, there are limitations in the mathematical modeling method as there is a complex relationship between the deformation conditions and the mechanical properties. Therefore, in this study, flow stress prediction was performed by applying conventional constitutive equation and artificial intelligence technology, which is known to be effective in modeling complex relationships. As a result, it was confirmed that the flow stresses modeled by the artificial neural network showed a higher accuracy than the flow stresses modeled by the conventional Arrhenius hyperbolic sine equation.
A convolutional neural network (CNN), which exhibits excellent performance in solving image-based problem, has been widely applied to various industrial problems. In general, the CNN model was applied to defect inspection on the surface of raw materials or final products, and its accuracy also showed better performance compared to human inspection. However, surfaces with heterogeneous and complex backgrounds have difficulties in separating defects region from the background, which is a typical challenge in this field. In this study, the CNN model was applied to detect surface defects on a hierarchical patterned surface, one of the representative complex background surfaces. In order to optimize the CNN structure, the change in inspection performance was analyzed according to the number of layers and kernel size of the model using evaluation metrics. In addition, the change of the CNN’s decision criteria according to the change of the model structure was analyzed using a class activation map (CAM) technique, which can highlight the most important region recognized by the CNN in performing classification. As a result, we were able to accurately understand the classification manner of the CNN for the hierarchical pattern surface, and an accuracy of 93.7% was achieved using the optimized model.
15 January 2019 in The International Journal of Advanced Manufacturing Technology
We have investigated the effect of initial microstructures on the change in critical current density (Jc) of Nb-46.5 wt%Ti (NbTi) superconducting material. It is well known that α-Ti phases distributed in NbTi material act as a flux pinning center, resulting in an improvement in critical current density. Therefore, it is crucial to obtain the grain-refined microstructure, which is strongly related with precipitation of uniformly distributed fine α-Ti phases and higher volume faction of α-Ti phases, as α-Ti phases are precipitated at the grain boundaries and triple points during heat treatments. Therefore, in order to characterize the effect of initial microstructure of NbTi on critical current density, different initial microstructures were obtained by applying equal channel angular pressing (ECAP) and hot rolling with different strains. It was revealed experimentally that hot rolling with a higher strain is efficient for obtaining the initial microstructure, which has equiaxed fine grains of β-NbTi with the aid of dynamic recrystallization, and which is helpful for precipitating fine α-Ti phases during intermediate heat treatment. Furthermore, it was confirmed that critical current density can be enhanced by obtaining a smaller α-Ti phase, a higher aspect ratio of α-Ti phase, a higher volume fraction of α-Ti phase and a ribbon-like folded α-Ti phase.