Young-Seok Oh

Mr. Young-Seok Oh


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2022 in Metals
Verified
Journal Article
Open access
PDF file
IMIn Yong Moon
In Yong Moon
HJHi Won Jeong
Hi Won Jeong
HLH. W. Lee
H. W. Lee
SKSe-Jong Kim
Se-Jong Kim
YOYoung-Seok Oh
Young-Seok Oh
SKSeong-Hoon Kang
Seong-Hoon Kang
The high-temperature deformation behavior of metals and alloys undergoes complex mechanisms depending on the deformation conditions. The microstructure and mechanical properties after deformation are important factors that determine the strength and durability of the final product. Therefore, many studies to predict the microstructure and mechanical properties have been conducted. In this regard, numerous mathematical approaches for predicting microstructure and flow stress have been proposed over the past half century. Accordingly, many advances have been made in the field of material science. Nevertheless, there are limitations in the mathematical modeling method as there is a complex relationship between the deformation conditions and the mechanical properties. Therefore, in this study, flow stress prediction was performed by applying conventional constitutive equation and artificial intelligence technology, which is known to be effective in modeling complex relationships. As a result, it was confirmed that the flow stresses modeled by the artificial neural network showed a higher accuracy than the flow stresses modeled by the conventional Arrhenius hyperbolic sine equation.

6 January 2022 in Metals
Verified
Journal Article
Open access
PDF file
SPSung Jin Park
Sung Jin Park
SJSeong-Hyeon Jo
Seong-Hyeon Jo
JKJung Gi Kim
Jung Gi Kim
JKJuntae Kim
Juntae Kim
RLRyul Lee
Ryul Lee
JJJaimyun Jung
Jaimyun Jung
Invar alloy possesses a uniquely low coefficient of thermal expansion, making it an ideal material for fine metal masks. To manufacture fine metal masks, Invar alloys are often cold-rolled, during which residual stress develops. Heat treatment is an effective means to control residual stress that develops within Invar sheets after cold rolling, but the treatment should be carried out with care. In this article, a comprehensive study on the effect of heat treatment on the residual stress, microstructure, and mechanical properties of a cold-rolled Invar sheet is reported. We show that while both recovery and recrystallization are effective means of reducing residual stress, substantial microstructural changes and, therefore, notable changes in mechanical properties and residual stress, occur after recrystallization. Moreover, residual stress release due to recrystallization can be affected by microstructure and texture prior to heat treatment as these factors play a significant role in recrystallization.

21 April 2021 in Materials
Verified
Journal Article
Open access
PDF file
IMIn Yong Moon
In Yong Moon
HLH. W. Lee
H. W. Lee
SKSe-Jong Kim
Se-Jong Kim
YOYoung-Seok Oh
Young-Seok Oh
JJJaimyun Jung
Jaimyun Jung
SKSeong-Hoon Kang
Seong-Hoon Kang
A convolutional neural network (CNN), which exhibits excellent performance in solving image-based problem, has been widely applied to various industrial problems. In general, the CNN model was applied to defect inspection on the surface of raw materials or final products, and its accuracy also showed better performance compared to human inspection. However, surfaces with heterogeneous and complex backgrounds have difficulties in separating defects region from the background, which is a typical challenge in this field. In this study, the CNN model was applied to detect surface defects on a hierarchical patterned surface, one of the representative complex background surfaces. In order to optimize the CNN structure, the change in inspection performance was analyzed according to the number of layers and kernel size of the model using evaluation metrics. In addition, the change of the CNN’s decision criteria according to the change of the model structure was analyzed using a class activation map (CAM) technique, which can highlight the most important region recognized by the CNN in performing classification. As a result, we were able to accurately understand the classification manner of the CNN for the hierarchical pattern surface, and an accuracy of 93.7% was achieved using the optimized model.

5 September 2019 in Materials
Verified
Journal Article
Open access
PDF file
HLH. W. Lee
H. W. Lee
KYKwang Jae Yoo
Kwang Jae Yoo
TTTien Tran
Tien Tran
IMIn Yong Moon
In Yong Moon
YOYoung-Seok Oh
Young-Seok Oh
Dong-Kyu KimDong-Kyu Kim
Dong-Kyu Kim
In the present study, we have investigated the effect of post-welding heat treatment (PWHT) of quenching and tempering (QT) on the microstructure and mechanical properties of welded boron steel joints processed using laser-arc hybrid welding on two commercial filler materials, SM80 (Type-I) and ZH120 (Type-II). The microstructure and mechanical properties of the weld joints were characterized via optical microscopy, Vickers microhardness, and the uniaxial tensile test. The macrostructure of the weld joint was composed of a fusion zone (FZ), heat-affected zone (HAZ), and base metal zone (BMZ). After the QT-PWHT, the QT specimens revealed the V-shape hardness distribution across the weld joint, while the as-welded specimen exhibited the M-shape hardness distribution. As a result, the QT specimens revealed the premature fracture with little reduction in the area at the interface between the HAZ and FZ, while the as-welded specimen exhibited the local necking and rupture in the BMZ. In addition, the Type-II filler material with a greater value of equivalent carbon content was rarely influenced by the tempering, maintaining its hardness in the as-quenched status, while the Type-I filler material showed a gradual decrease in hardness with the tempering time. The results demonstrate that the Type-II weld joint outperformed the Type-I weld joint in terms of the structural integrity of welded parts.

10 May 2021 in Metals
Verified
Journal Article
Open access
PDF file
IMIn Yong Moon
In Yong Moon
SKSe-Jong Kim
Se-Jong Kim
HLH. W. Lee
H. W. Lee
JJJaimyun Jung
Jaimyun Jung
YOYoung-Seok Oh
Young-Seok Oh
SKSeong-Hoon Kang
Seong-Hoon Kang
We have investigated the effect of initial microstructures on the change in critical current density (Jc) of Nb-46.5 wt%Ti (NbTi) superconducting material. It is well known that α-Ti phases distributed in NbTi material act as a flux pinning center, resulting in an improvement in critical current density. Therefore, it is crucial to obtain the grain-refined microstructure, which is strongly related with precipitation of uniformly distributed fine α-Ti phases and higher volume faction of α-Ti phases, as α-Ti phases are precipitated at the grain boundaries and triple points during heat treatments. Therefore, in order to characterize the effect of initial microstructure of NbTi on critical current density, different initial microstructures were obtained by applying equal channel angular pressing (ECAP) and hot rolling with different strains. It was revealed experimentally that hot rolling with a higher strain is efficient for obtaining the initial microstructure, which has equiaxed fine grains of β-NbTi with the aid of dynamic recrystallization, and which is helpful for precipitating fine α-Ti phases during intermediate heat treatment. Furthermore, it was confirmed that critical current density can be enhanced by obtaining a smaller α-Ti phase, a higher aspect ratio of α-Ti phase, a higher volume fraction of α-Ti phase and a ribbon-like folded α-Ti phase.

25 August 2021 in Metals
Verified
Journal Article
Open access
PDF file
BCByung-Jin Choi
Byung-Jin Choi
IMIn Yong Moon
In Yong Moon
YOYoung-Seok Oh
Young-Seok Oh
SKSeong-Hoon Kang
Seong-Hoon Kang
SKSe-Jong Kim
Se-Jong Kim
HLH. W. Lee
H. W. Lee
In this paper, the extrusion process of titanium seamless tubes was studied using several finite element (FE) analyses. First, the finite element result was compared with experimental extrusion data acquired to validate the current analysis. Then, the effect of design parameters of the die shape was numerically analyzed using commercial FE software, Forge NxT, for the metal forming process. Elastic FE analyses were also conducted for dies to analyze the maximum principal stress that affects the early fracture of dies during the extrusion process and the maximum von Mises stress that causes the severe deformation of dies. Consequently, the effect of the corner radius at the exit and land length on the extrusion load and die stress is negligible compared to that of the corner radius at the entrance and die angle. Finally, we suggested a die angle of 60° and a corner radius at the die entrance between 10 and 15 mm as an optimal design for the current extrusion process.