Michael D. Cropper

Dr. Michael D. Cropper


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2017 in Applied Surface Science
Verified
Journal Article
Open access
RVR. Valizadeh
R. Valizadeh
OMO.B. Malyshev
O.B. Malyshev
SWS. Wang
S. Wang
TST. Sian
T. Sian
MCMichael D. Cropper
Michael D. Cropper
NSN. Sykes
N. Sykes
This paper is closed access until 4th February 2018.Developing a surface with low Secondary Electron Yield (SEY) is one of the main ways of mitigating electron cloud and beam-induced electron multipacting in high-energy charged particle accelerators. In our previous publications, a low SEY < 0.9 for as-received metal surfaces modified by a nanosecond pulsed laser was reported. In this paper, the SEY of laser-treated blackened copper has been investigated as a function of different laser irradiation parameters. We explore and study the influence of micro- and nano-structures induced by laser surface treatment in air of copper samples as a function of various laser irradiation parameters such as peak power, laser wavelength (λ = 355 nm and 1064 nm), number of pulses per point (scan speed and repetition rate) and fluence, on the SEY. The surface chemical composition was determined by x-ray photoelectron spectroscopy (XPS) which revealed that heating resulted in diffusion of oxygen into the bulk and induced the transformation of CuO to sub-stoichiometric oxide. The surface topography was examined with high resolution scanning electron microscopy (HRSEM) which showed that the laser-treated surfaces are dominated by microstructure grooves and nanostructure features

17 October 2019 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PDF file
CCChristopher Cox
Christopher Cox
ACAndrew John Caruana
Andrew John Caruana
MCMichael D. Cropper
Michael D. Cropper
KMKelly Morrison
Kelly Morrison
Separation of the anomalous Nernst and spin Seebeck voltages in bilayer devices is often problematic when both layers are metallic, and the anomalous Nernst effect (ANE) becomes non-negligible. Co2MnSi, a strong candidate for the spin generator in spin Seebeck devices, is a predicted half-metal with 100% spin polarisation at the Fermi energy, however, typically B2 or L21 order is needed to achieve this. We demonstrate the optimisation of thin film growth of Co2MnSi on glass, where choice of deposition and annealing temperature can promote various ordered states. The contribution from the ANE is then investigated to inform future measurements of the spin Seebeck. A maximum ANE coefficient of 0.662 µV K−1 is found for an A2 disordered polycrystalline Co2MnSi film. This value is comparable to ordered Heusler thin films deposited onto single crystal substrates but obtained at a far lower fabrication temperature and material cost.

9 October 2012 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
SSS A Stanley
S A Stanley
CSC Stuttle
C Stuttle
ACA J Caruana
A J Caruana
MCMichael D. Cropper
Michael D. Cropper
AWAlex Walton
Alex Walton
Bismuth thin films of thickness in the region of 500 nm have been prepared by planar magnetron sputtering onto glass, silicon and GaAs substrates. Electron microscopy of these films reveals that bismuth whiskers grow spontaneously when the substrate is heated to temperatures between 110 and 140 °C during deposition and the optimum temperature for such growth is largely independent of substrate. Depositing films under similar conditions using thermal evaporation does not, however, produce the whisker growth. X-ray diffraction has been employed to investigate film texture with temperature and it has been shown that the film crystallites are predominantly [1 1 0] and [1 1 1] oriented. The [1 1 0] orientation of the crystallites dominates at deposition temperatures above 110 °C for sputter deposition and the [1 1 1] at lower temperatures. The optimum temperature for whisker growth coincides with the temperature for the change between predominant orientations. While sputter deposition appears to favour films with crystallite orientation of [1 1 0], thermal evaporation favours [1 1 1] and has a higher change-over temperature. The whiskers that grow from the film emerge at off-normal angles between 43.3° and 69.2° with a mean of 54 ± 3°. The projected length of whiskers on a 500 nm film on a GaAs substrate shows a wide distribution to a maximum of more than 100 µm. The mean projected length for this sample was 16 ± 1 µm and the diameter is around 0.5 µm. Measurements of the electrical properties of the whiskers at room temperature reveals ohmic behaviour with an estimated resistivity of 2.2 ± 0.2 µΩ m. Detailed examination of scanning electron micrographs, eliminates all growth mechanisms except tip growth by a non-catalysed vapour–solid/vapour–liquid–solid method. By depositing thinner films it is shown that this spontaneous growth of whiskers offers a route to fabricate high quality bismuth nanowires of lengths exceeding 10 µm.

7 July 2015 in Applied Physics A
Verified
Journal Article
Open access
PDF file
SSS. A. Stanley
S. A. Stanley
MCMichael D. Cropper
Michael D. Cropper
Bismuth thin films have been deposited using pulsed DC magnetron sputter deposition under four deposition conditions, combining powers of 50 and 100 W and argon gas pressures, 2 and 10 mTorr. Estimated deposition rates were between 0.08 and 3.5 nm s−1. The films were examined using scanning electron microscopy, cross-sectioning using a focussed ion beam (FIB), X-ray diffraction and sheet resistance and Hall effect measurement. Room temperature deposition gave a predominant orientational texture of (111) rhombohedral. However, higher film thickness, low sputtering power, high sputtering gas pressure and deposition onto a heated substrate above 125 °C increase the fraction of (110) orientation. FIB cross-sectioning indicates that films deposited at room temperature have an irregular crystalline structure with voids, but those grown at 160 °C are denser with a better polycrystalline structure. Transport measurements indicate a dominance of conduction by electrons, with films deposited at room temperature having high sheet resistance, low sheet resistance being favoured by low sputtering pressure. Deposition at higher temperatures improves the conductivity but increases the Hall coefficient.

1 June 2015 in Surface and Coatings Technology
Verified
Journal Article
Open access
ACA.J. Caruana
A.J. Caruana
MCMichael D. Cropper
Michael D. Cropper
SSS.A. Stanley
S.A. Stanley
This article belongs to a special issue of the journal from the 2014 International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT) - Europe.Thin films of bismuth of thickness 100nm have been deposited onto Si(111) substrates held at 120°C using magnetron sputter deposition. The three-inch magnetrons were operated at DC powers between 30W and 50W to give deposition rates between 0.03 and 0.09nms-1. Examination of the surface of the thin films using scanning electron microscopy revealed nanowires of diameter 80-120nm and length between 3 and 16μm emerging from the film. An investigation of the effect of deposition rate found little influence on the nanowire diameter, but indicated that some longer nanowires could be found on the film deposited at the lowest rate. A 20nm film grown on glass at 110°C shows a nanowire with dimension of around 50nm. Using a relatively higher rate for the first 25nm followed by a lower rate to 100nm produced some very straight and regular nanorods

15 January 2010 in Surface Science
Verified
Journal Article
Open access
CHC.J. Howe
C.J. Howe
MCMichael D. Cropper
Michael D. Cropper
TFT.P. Fleming
T.P. Fleming
RWR.M. Wardle
R.M. Wardle
PBP. Bailey
P. Bailey
TNT.C.Q. Noakes
T.C.Q. Noakes