Objectives:To analyze and evaluate imaging artefacts induced by zirconium, titanium and titanium–zirconium alloy dental implants.Methods:Zirconium, titanium and titanium–zirconium alloy implants were embedded in gelatin and MRI, CT and CBCT were performed. Standard protocols were used for each modality. For MRI, line–distance profiles were plotted to quantify the accuracy of size determination. For CT and CBCT, six shells surrounding the implant were defined every 0.5 cm from the implant surface and histogram parameters were determined for each shell.Results:While titanium and titanium–zirconium alloy induced extensive signal voids in MRI owing to strong susceptibility, zirconium implants were clearly definable with only minor distortion artefacts. For titanium and titanium–zirconium alloy, the MR signal was attenuated up to 14.1 mm from the implant. In CT, titanium and titanium–zirconium alloy resulted in less streak artefacts in comparison with zirconium. In CBCT, titanium–zirconium alloy induced more s...

Objectives:The purpose of this study was to design, build and test a multielement receive coil array and position system, which is optimized for three-dimensional (3D) high-resolution dental and maxillomandibular MRI with high patient comfort.Methods:A 14 + 1 coil array and positioning system, allowing easy handling by the technologists, reproducible positioning of the patients and high patient comfort, was tested with three healthy volunteers using a 3.0-T MRI machine (Siemens Skyra; Siemens Medical Solutions, Erlangen, Germany). High-resolution 3D T1 weighted, water excitation T1 weighted and fat-saturated T2 weighted imaging sequences were scanned, and 3D image data were reformatted in different orientations and curvatures to aid diagnosis.Results:The high number of receiving coils and the comfortable positioning of the coil array close to the patient's face provided a high signal-to-noise ratio and allowed high quality, high resolution, 3D image data to be acquired within reasonable scan times owing t...

Objectives: The aim of our study was to describe microbial flora associated with MRONJ and characterize the susceptibility of pathogens to help guide an effective empiric antibiotic treatment in these patients. Materials and methods: A retrospective, single-center analysis was performed, using 116 bone samples from 98 patients. The bone samples were homogenized and subjected to routine culture methods. Growing bacteria were differentiated to the species level using whole-cell mass spectrometry and subjected to susceptibility testing. Results: A highly diverse microbial flora was detected in necrotic bone, with a simultaneous presence of two or more bacterial species in 79% of all patients. In at least 65% of samples, gram-negative isolates were detected. Therefore, bacterial species resistant against β-lactamase inhibitors were present in at least 70% of all patients. Conclusions: The empiric choice of antibiotics in MRONJ patients should consider the high rate of gram-negative bacteria and resistance against β-lactam antibiotics. Clinical relevance: According to recent guidelines and recommendations, systemic antibiotic treatment is a key component in the treatment of all stage 2 and 3 MRONJ patients. We recommend using fluoroquinolones for empiric treatment and emphasize the use of bacterial cultivation and susceptibility testing to enable an effective antibiotic treatment.