In this article, we present a novel application of glide symmetry to differential lines with common-mode (CM) rejection filter properties. Two different topologies are investigated. First, glide symmetry is applied to a pair of differential lines where ground-connected mushrooms are employed as a CM rejection structure. The same idea is also used in a pair of differential lines where defective ground structures are introduced to stop the CM propagation. It is demonstrated that the CM rejection bandwidth is drastically increased when glide symmetry is exploited in both topologies when compared with their corresponding structures without glide symmetry. Furthermore, we show that the differential-mode propagation is hardly affected by the use of glide symmetry, ensuring the good integrity of the transmitted information. Experimental demonstration for both mushroom and defected ground structure is provided. Good agreement between simulations and measurements results is observed.
16 December 2020 in IEEE Transactions on Microwave Theory and Techniques
In this work, a rigorous approach for the design of a differential coupled-line directional coupler (DCLDC) implemented in double-side coplanar-waveguide (CPW) technology is presented. Due to the double symmetry of the structure, it is possible to obtain the coupling level and port characteristic impedances of the coupler in a simple and efficient way. In addition, due to the broadside coupling of the involved differential CPW lines, a wide range of coupling levels can be covered. Design curves relating the geometrical parameters of the structure to the electrical parameters of the DCLDC are provided, and a 3-dB coupler with an impedance of 50 Ω at the terminal ports has been designed, fabricated, and measured. Common-mode (CM) transmission to both through and coupled output ports has been reduced by adding a simple and compact CM filter at the input port. The good agreement between the results obtained with EM simulation, transmission line models, and measurements confirms the benefits of the proposed structure and the suitability of the design procedure.
10 January 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this paper, glide symmetry is applied to design common-mode rejection filters based on defected ground structures with bandstop response. To this aim, complementary split-ring resonators are chosen as the basic components for common-mode rejection. To illustrate the advantages of using glide symmetry, three implementations are studied and compared. The results reveal that glide symmetry offers the best performance in terms of common-mode rejection level and fractional bandwidth. Furthermore, glide symmetry barely affects the integrity of the differential mode. A prototype of each of the considered symmetries has been designed, simulated, and tested for practical validation. Good agreement is observed between the simulated and measured results, experimentally demonstrating the advantages of glide symmetry.
Two new compact balanced-to-balanced diplexers composed of two multiband balanced bandpass filters in a multilayer configuration are proposed in this letter to perform dual- and tri-band responses. The balanced bandpass filters are based on the use of magnetically coupled open-loop resonators. The magnetic coupling results in a strong inherent common-mode rejection, greater than 40 dB within all the dual-band diplexer passbands and greater than 30 dB for the tri-band diplexer passbands. All passbands in both diplexers are close to each other and well separated thanks to the presence of several transmission zeroes between them. Operating frequencies have been selected to be within the L band, used for many applications such as mobile services or satellite navigation. Specifically, the dual-band diplexer passbands are located at 1.08/1.58 GHz and 1.3/1.8 GHz with fractional bandwidths of 7/5.2 % and 7.4/5.5 %, while the tri-band diplexer passbands are located at 1.7/2.2/2.79 GHz and 1.97/2.37/2.95 GHz with fractional bandwidths of 4.1/4.6/3.5 % and 5.6/4.6/3.7 %. Measurements of two different prototypes are provided to validate the obtained simulation results, illustrating in this manner the usefulness of the proposed design methodology.
A new dual-band balanced bandpass filter based on magnetically coupled open-loop resonators in multilayer technology is proposed in this paper. The lower differential passband, centered at the Global Positioning System (GPS) L1 frequency, 1.575 GHz, was created by means of two coupled resonators etched in the middle layer of the structure, while the upper differential passband, centered at a Wi-Fi frequency of 2.4 GHz, was generated by coupling two resonators on the top layer. Magnetic coupling was used to design both passbands, leading to an intrinsic common-mode rejection of 39 dB within the lower passband and 33 dB within the upper passband. Simulation and measurement results are provided to verify the usefulness of the proposed dual-band differential bandpass filter.
A novel technique for designing balanced-to-balanced diplexers with enhanced common-mode rejection is presented. In this approach, the conventional T-junction typically used to feed the diplexer output channels is replaced by a pair of over-coupled H-shaped resonators. Each output channel is implemented using a second-order balanced filter, also based on H-shaped resonators. These filters are independently designed using standard coupled-resonator theory and are subsequently electromagnetically coupled to a common differential input port to achieve diplexing functionality. For performance comparison, two diplexers are designed: one employing the traditional T-junction and the other utilizing the proposed over-coupled H-shaped resonators. Both simulation and measurement results confirm the superiority of the proposed architecture in terms of common-mode rejection and overall performance.