Our goal is to solve the complexity of laying down wiring for traditional monitoring systems for mine water, while taking into account the poor timeliness of sampling and continuous monitoring, based on the processing and reuse of mine water. In this article, we focus on the theory of multi-sensor networks to estimate mine water quality, quantity monitoring equipment, and mine water Internet of Things (hereafter denoted “IoT”) communication systems. We designed a mine water IoT monitoring system for the wireless monitoring of water quantity and quality, developed an experimental platform for the wireless monitoring of mine water. This platform has the advantages of simple wiring and strong expandability. Finally, we tested and analyzed the system operation effects. To solve the problem of partial data abnormalities caused by problems of sensing equipment, we propose a data abnormality detection method based on an isolated forest that combines the characteristics of the sufficient timeliness of mine water monitoring data, and we offer experimental verification and analysis. The experimental results show that the system can realize the real-time wireless monitoring of mine water quality and quantity information with stable and fast data transmission capability. Furthermore, the system can quickly discover, analyze, and process abnormal data, has sufficient timeliness while guaranteeing the validity of the data output from the monitoring platform.
As a continuous antenna, the leaky coaxial cable (LCX) is widely used in wireless communication of closed or semi-closed areas such as the subway, mine, tunnel, etc. Usually, LCX networks are required in coal mines. Its channel characteristics are of great significance to mobile communication and mine safety. This paper presents an effective channel modeling and optimization method that combines the state transition and the particle swarm optimization (PSO) algorithms for the LCX network. First, a channel model can be established with a few parameters based on the state transition method, which can describe the complex transfer function of the LCX network; then, taking the transfer characteristics of the LCX network as the optimization objective, which should be consistent with the measured results. And the established objective function is optimized and designed with the PSO algorithm. Finally, the proposed method is validated by comparing the measured results and the model-based simulations on two test LCX networks. The experimental results show that the absolute error between the proposed model and the measurement model is less than that of other models at any frequency point. The proposed model can accurately obtain all responses between point-to-point channels at one time. It will help to accurately obtain the performance of different LCX networks and help to detect and locate faults in future studies.
When integrating evolutionary algorithms into the process of the design of modular robots, the "reality gap" problem leads to the difference between simulation and reality. A modular robot transplantation method based on the improved inverse distance weighting method proxy model is presented. Based on the plane moving task, the portability of the modular robot consisting of EMERGE modules of different shapes and types was experimentally studied. The information of other real robots can be predicted according to the limited evolutionary data of real robots. It is no need to do all the evaluation experiments on a physical robot. The number and complexity of experiments are reduced. the experiment efficiency is improved. This method can effectively reduce the performance difference between the results of simulation and the real robot caused by the "reality gap" problem, and the portability of modular robots improves greatly.