In recent years, stimuli responsive materials have gained significant attention in membrane separation processes due to their ability to change specific properties in response to small external stimuli, such as light, pH, temperature, ionic strength, pressure, magnetic field, antigen, chemical composition, and so on. In this review, we briefly report recent progresses in light-driven materials and membranes. Photo-switching mechanisms, valved-membrane fabrication and light-driven properties are examined. Advances and perspectives of light responsive polymer membranes in biotechnology, chemistry and biology areas are discussed.

The research on electro-conductive membranes has expanded in recent years. These membranes have strong prospective as key components in next generation water treatment plants because they are engineered in order to enhance their performance in terms of separation, flux, fouling potential, and permselectivity. The present review summarizes recent developments in the preparation of electro-conductive membranes and the mechanisms of their response to external electric voltages in order to obtain an improvement in permeation and mitigation in the fouling growth. In particular, this paper deals with the properties of electro-conductive polymers and the preparation of electro-conductive polymer membranes with a focus on responsive membranes based on polyaniline, polypyrrole and carbon nanotubes. Then, some examples of electro-conductive membranes for permeation enhancement and fouling mitigation by electrostatic repulsion, hydrogen peroxide generation and electrochemical oxidation will be presented.

This work validates a sustainable way to produce customized PVDF membranes, suitable for contactors applications, in which DMSO is employed as nonhazardous solvent, in place of substances of very high concern (SVHC), by a combination of vapor-induced and liquid-induced phase separation (VIPS and LIPS) stages, and without using any chemical additive as pore forming. The experimental results highlight the key role of the kinetic and thermodynamic parameters of the phase separation processes involved in the control of the surface and transport properties of the PVDF membranes. Namely, combining VIPS and LIPS techniques in a controlled way, allowed to produce symmetric porous membranes with customized rough surface topography (root-mean-square roughness up to 0.67 μm) and hydrophobicity (water contact angle up to 140°) according to a biomimetic behavior as that of lotus leaves surfaces, through an environmental friendly fabrication process. The resulting membranes are characterized by a high porosity (total porosity ≥70%, mean pore size 0.08–0.4 μm), with well interconnected pores, despite no pore former additives were included in the dope solution, making them ideal candidates for application in membrane contactors. The quality of the produced membrane (permeate flux up to 12.1 kgh^1–m^–2 with salt rejection 99.8%) is assessed by MD tests and results showed comparable performance to commercial PVDF membranes having similar mean pore size, porosity and surface roughness, but produced using SVCH solvents.