Basalt fiber has been proved to be a good modified material for asphalt mixture. The performance of basalt fiber modified asphalt mixture has been widely investigated by extensive researches. However, most studies focused on ordinary static load tests, and less attention was paid to the dynamic mechanical response of asphalt mixture incorporating with basalt fiber. This paper aims to establish the master curve of complex modulus of asphalt mixture incorporating of styrene-butadiene-styrene (SBS) polymer and basalt fiber using the generalized Sigmoidal model. Both loading frequency and temperature were investigated for dynamic mechanical response of asphalt mixture with basalt fiber. In addition, based on the time-temperature superposition principle, the master curves of complex modulus were constructed to reflect the dynamic mechanical response at an extended reduced frequency range at an arbitrary temperature. Results indicated that the generalized Sigmoidal model in this paper could better reflect the dynamic mechanical response accurately with correlation coefficients above 0.97, which is utilized to predict the dynamic mechanical performances accurately. Simultaneously, the modulus values exhibit an increasing trend with loading frequency and decrease versus temperature. However, the phase angle values showed different trends with frequency and temperature.

Engineered cementitious composite (ECC) is a potential cement-based material with the abilities of large deformation and crack width control. However, ECC is difficult to popularize in many developing countries because the costs of silica sand and polyvinyl alcohol (PVA) fiber with a surface coating are too high for practical engineering. Therefore, we proposed an economical ECC with superfine river sand and polypropylene (PP) fiber (SSPP-ECC) to replace PVA fiber and silica sand. The SSPP-ECC proposed in this paper is a sustainable material using local material ingredients, which has considerable adaptability for large-scale engineering applications. The 16 groups of specimens were prepared through a factorial design method, curing for four-point bending tests. The bending strength, deflection, flexural modulus of elasticity, and crack width were measured and calculated during the test. The factor analysis of the test results shows that the contents of fiber and fly ash had significant effects on the ductility of SSPP-ECC with an extra combined effect at the same time, and a response surface model with high accuracy was fitted to predict the yield length of SSPP-ECC. The ductility of SSPP-ECC was positively related to its crack-control ability and it was shown that the crack width of SSPP-ECC increased significantly with a high content of superfine sand. This paper proposed a reasonable way to utilize superfine sand and provided the mix proportion of SSPP-ECC with characteristics of deformation hardening and multi-cracking, which may cater to the demands of many concrete components on ductility and crack resistance.

In response to the current common disease of concrete leveling overlays of bridge pavement in China, the feasibility of using an economic SSPP-ECC with local waste superfine sand as an alternative material for a leveling overlay was proposed in this study. To evaluate the interface bonding property in the girder between the SSPP-ECC and concrete, a slant shear test and split tensile test were designed to study the interfacial shear and tensile properties of the ordinary concrete/ordinary concrete (OC/OC) and ordinary concrete/SSPP-ECC (OC/ECC), where the results showed that SSPP-ECC could significantly improve the interface shear stress and split tensile strength compared to ordinary concrete. Furthermore, the damage status of OC/ECC no longer involved fracturing along the interface; instead, each of the two substrates was partially destroyed, which revealed that OC/ECC had a high bonding effect. Moreover, a restrained shrinkage test was carried out to evaluate the shrinkage property of SSPP-ECC, where the result showed that the shrinkage strain of SSPP-ECC was slightly lower than concrete, where the average cracking time for SSPP-ECC was far longer than for ordinary concrete under the same ambient drying conditions; furthermore, the stress rate for SSPP-ECC revealed that it was a low-cracking-risk material. Meanwhile, the crack width of SSPP-ECC was only 0.1 mm after 35 d, which showed that SSPP-ECC had a more substantial crack width control capacity relative to concrete. The test results initially verified the feasibility and great potential of economic SSPP-ECC applied in a bridge pavement leveling overlay.