This paper investigates the effects of basalt fiber content, length and asphalt-aggregate ratio on the volumetric and strength properties of styrene-butadiene-styrene (SBS)-modified asphalt mixture reinforced with eco-friendly basalt fiber. An experimental scheme was designed to optimize three preparation parameters for the Marshall test indices based on response surface methodology (RSM). The results showed that basalt fiber content presents a more significant effect on air voids, voids in mineral aggregates and voids filled with asphalt. Basalt fiber length is more related to Marshall stability, and flow value exhibits a significant variation trend with asphalt-aggregate ratio. The optimization of preparation parameters is determined as follows: basalt fiber content is 0.34%, length is 6 mm, asphalt-aggregate ratio is 6.57%, which possesses favorable and reliable accuracy compared with experimental results. Furthermore, basalt fiber reinforced asphalt binder and mixture were also studied, and it was found that basalt fiber can enhance the performance of asphalt binder and mixture in terms of cone penetration, softening point, force ductility, as well as pavement performance tests.

This study proposed an asphalt mixture modified by basalt fiber and diatomite. Performance of diatomite modified asphalt mixture (DAM), basalt fiber modified asphalt mixture (BFAM), diatomite and basalt fiber compound modified asphalt mixture (DBFAM), and control asphalt mixture (AM) were investigated by experimental methods. The wheel tracking test, low-temperature indirect tensile test, moisture susceptibility test, fatigue test and freeze–thaw cycles test of four kinds of asphalt mixtures were carried out. The results show that the addition of basalt fiber and diatomite can improve the pavement performance. Diatomite has a significant effect on the high temperature stability, moisture susceptibility and resistance to moisture and frost damage under freeze–thaw cycles of asphalt mixture. Basalt fiber has a significant effect on low-temperature cracking resistance of asphalt mixture. Composed modified asphalt mixture has obvious advantages on performance compared to the control asphalt mixture. It will provide a reference for the design of asphalt mixture in seasonal frozen regions.

The main distresses of asphalt pavements in seasonal frozen regions are due to the effects of water action, freeze-thaw cycles, traffic, and so on. Fibers are usually used to reinforce asphalt mixtures, in order to improve its mechanical properties. Basalt fiber is an eco-friendly mineral fiber with high mechanical performance, low water absorption, and an appropriate temperature range. This paper aims to address the freeze-thaw damage characteristics of asphalt mixtures (AC-13) reinforced with eco-friendly basalt fiber, with a length of 6 mm. Based on the Marshall design method and ordinary pavement performances, including rutting resistance, anti-cracking, and moisture stability, the optimum asphalt and basalt fiber contents were determined. Test results indicated that the pavement performances of asphalt mixture exhibited a trend of first increasing and then deceasing, with the basalt fiber content. Subsequently, asphalt mixtures with a basalt fiber content of 0.4% were prepared for further freeze-thaw tests. Through the comparative analysis of air voids, splitting strength, and indirect tensile stiffness modulus, it could be found that the performances of asphalt mixtures gradually declined with freeze-thaw cycles and basalt fiber had positive effects on the freeze-thaw resistance. This paper can be used as a reference for further investigation on the freeze-thaw damage model of asphalt mixtures with basalt fiber.

Basalt fiber has been proved to be a good modified material for asphalt mixture. The performance of basalt fiber modified asphalt mixture has been widely investigated by extensive researches. However, most studies focused on ordinary static load tests, and less attention was paid to the dynamic mechanical response of asphalt mixture incorporating with basalt fiber. This paper aims to establish the master curve of complex modulus of asphalt mixture incorporating of styrene-butadiene-styrene (SBS) polymer and basalt fiber using the generalized Sigmoidal model. Both loading frequency and temperature were investigated for dynamic mechanical response of asphalt mixture with basalt fiber. In addition, based on the time-temperature superposition principle, the master curves of complex modulus were constructed to reflect the dynamic mechanical response at an extended reduced frequency range at an arbitrary temperature. Results indicated that the generalized Sigmoidal model in this paper could better reflect the dynamic mechanical response accurately with correlation coefficients above 0.97, which is utilized to predict the dynamic mechanical performances accurately. Simultaneously, the modulus values exhibit an increasing trend with loading frequency and decrease versus temperature. However, the phase angle values showed different trends with frequency and temperature.

The main distresses of asphalt pavements in seasonally frozen regions are due to the effects of water action, freeze-thaw cycles, and so on. Basalt fiber, as an eco-friendly mineral fiber with high mechanical performance, has been adopted to reinforce asphalt mixture in order to improve its mechanical properties. This study investigated the freeze-thaw damage characteristics of asphalt mixtures reinforced with eco-friendly basalt fiber by volume and mechanical properties—air voids, splitting tensile strength, and indirect tensile stiffness modulus tests. Test results indicated that asphalt mixtures reinforced with eco-friendly basalt fiber had better mechanical properties (i.e., splitting tensile strength and indirect tensile stiffness modulus) before and after freeze-thaw cycles. Furthermore, this study developed logistic damage models of asphalt mixtures in terms of the damage characteristics, and found that adding basalt fiber could significantly reduce the damage degree by about 25%, and slow down the damage grow rate by about 45% compared with control group without basalt fiber. Moreover, multi-variable grey models (GM) (1,N) were established for modelling the damage characteristics of asphalt mixtures under the effect of freeze-thaw cycles. GM (1,3) was proven as an effective prediction model to perform better in prediction accuracy compared to GM (1,2).

Asphalt pavement located in seasonal frozen regions usually suffers low-temperature cracking and freeze–thaw damage. For this reason, diatomite and basalt fiber were used to modify asphalt mixtures. An indirect tensile test was used to determine the low-temperature performance of the asphalt mixture. The influences of freeze–thaw (F–T) cycles on strength, tensile failure strain, stiffness modulus, and strain energy density were analyzed. The variation of the stress–strain curve under F–T cycles was analyzed. The stress–strain curve was divided into a linear zone and nonlinear zone. The linear zone stress ratio and linear zone strain ratio were proposed as indexes to evaluate the nonlinear characteristics of the stress–strain curve. The results show that the basalt fiber–diatomite-modified asphalt mixture had better low temperature crack resistance and antifreeze–thaw cycles capacity compared to the control asphalt mixture. The F–T cycles made the nonlinear characteristics of the stress–strain relationship of the asphalt mixture remarkable, and also decreased the linear zone stress ratio and linear zone strain ratio. The damage constitutive model established in this paper can describe the stress–strain relationship after F–T damage well.