Traian Zaharescu

Prof. Traian Zaharescu

National Institute for Electrical Engineering, INCDIE ICPE - CA, Bucharest, Romania
orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 September 2018 in Materials
Verified
Journal Article
Open access
PDF file
Raluca Nicoleta DARIE-NITARaluca Nicoleta DARIE-NITA
Raluca Nicoleta DARIE-NITA
CVCornelia Vasile
Cornelia Vasile
ESElena Stoleru
Elena Stoleru
PDPamfil Daniela
Pamfil Daniela
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
KLKarol Leluk
Karol Leluk
New multifunctional materials containing additives derived from natural resources as powdered rosemary ethanolic extract were obtained by melt mixing and processed in good conditions without degradation and loss of additives. Incorporation of powdered rosemary ethanolic extract (R) into poly(lactic acid) (PLA) improved elongation at break, rheological properties, antibacterial and antioxidant activities, in addition to the biocompatibility. The good accordance between results of the chemiluminescence method and radical scavenging activity determination by chemical method evidenced the increased thermoxidative stability of the PLA biocomposites with respect to neat PLA, with R acting as an antioxidant. PLA/R biocomposites also showed low permeability to gases and migration rates of the bioactive compounds and could be considered as high-performance materials for food packaging. In vitro biocompatibility based on the determination of surface properties demonstrated a good hydrophilicity, better spreading and division of fibroblasts, and increased platelet cohesion. The implantation of PLA/R pellets, was proven to possess a good in vivo biocompatibility, and resulted in similar changes in blood parameters and biochemical responses with the control group, suggesting that these PLA-based materials demonstrate very desirable properties as potential biomaterials, useful in human medicine for tissue engineering, wound management, orthopedic devices, scaffolds, drug delivery systems, etc. Therefore, PLA/R-based materials show promising properties for applications both in food packaging and as bioactive biomaterials.

29 April 2023 in Biomolecules
Verified
Journal Article
Open access
PDF file
Maria StancaMaria Stanca
Maria Stanca
Carmen GaidauCarmen Gaidau
Carmen Gaidau
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
GBGeorge - Alin Balan
George - Alin Balan
IMIulia Matei
Iulia Matei
Gabriela IonitaGabriela Ionita
Gabriela Ionita
In this study, the effect of gamma irradiation (10 kGy) on proteins extracted from animal hide, scales, and wool was evidenced by calorimetric (μDSC) and spectroscopic (IR, circular dichroism, and EPR) methods. Keratin was obtained from sheep wool, collagen and bovine gelatin from bovine hide, and fish gelatin from fish scales. The μDSC experiments evidenced that gamma irradiation influences the thermal stability of these proteins differently. The thermal stability of keratin decreases, while a resistance to thermal denaturation was noticed for collagen and gelatins after gamma irradiation. The analysis of the IR spectra demonstrated that gamma irradiation determines changes in the vibrational modes of the amide groups that are associated with protein denaturation, most meaningfully in the case of keratin. As evidenced by circular dichroism for all proteins considered, exposure to gamma radiation produces changes in the secondary structure that are more significant than those produced by UV irradiation. Riboflavin has different effects on the secondary structure of the investigated proteins, a stabilizing effect for keratin and fish gelatin and a destabilizing effect for bovine gelatin, observed in both irradiated and non-irradiated samples. The EPR spectroscopy evidences the presence, in the gamma-irradiated samples, of free radicals centered on oxygen, and the increase in their EPR signals over time due to the presence of riboflavin.

29 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
CVCornelia Vasile
Cornelia Vasile
PDPamfil Daniela
Pamfil Daniela
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
RDRaluca Dumitriu
Raluca Dumitriu
GPGina Mihaela Pricope
Gina Mihaela Pricope
VGVasilievici Gabriel
Vasilievici Gabriel
The irradiation of polymeric materials with ionizing radiation (γ-rays, X-rays, accelerated electrons, ion beams, etc.) may lead to disproportion, hydrogen abstraction, arrangements, degradation, and/or the formation of new bonds. The purpose of this paper is to evaluate the effect of gamma irradiation on some new poly(lactic acid) (PLA)-based blends and biocomposites, which is crucial when they are used for food packaging or medical purposes. The polymeric blends and biocomposites based on PLA and rosemary ethanolic extract (R) and poly(ethylene glycol) (PEG) (20 wt%) plasticized PLA, chitosan (CS) (3–6 wt%) and R (0.5 wt%) biocomposites were subjected to gamma irradiation treatment using three low γ-doses of 10, 20, and 30 kGy. The effect of irradiation was evaluated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), thermogravimetry (TG), chemiluminescence method (CL), migration studies, and antibacterial activity tests. It was found that in comparison with neat PLA, the gamma irradiation in the oxidative conditions of the PLA-based blends and biocomposites, causes modifications in the structure, morphology, and thermal properties of the materials depending on irradiation dose and the presence of natural additives such as rosemary and chitosan. It was established that under a gamma-irradiation treatment with dose of 10–20 kGy, the PLA materials showed minor changes in structure and properties being suitable for application in packaging and in addition after irradiation with such doses their antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium is improved.

Verified
Journal Article
Open access
PDF file
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
MMMarius Maris
Marius Maris
In this paper several aspects of profound modifications caused by high energy exposures are presented as possible candidates for the efficient adjusting processing of polymer materials. The class of hybrid composites receives special attention due to the large spectrum of formulations, where the interphase interaction decisively influences the material properties. They represent potential start points for the intimate uniformity of hybrid morphologies. Their radiation processing turns composites onto hybrid morphology with expected features, because the transferred energy is spent for the modification of components and for their compatibility. The essential changes achieved in radiation processed composites explain the new material behavior and durability based on the peculiar restructuring of polymer molecules that occurred in the polymer phase. During high energy irradiation, the interaction between intermediates born in the constitutive phases may convert the primary composites into hybrids, integrating them into large applicability spheres. During the radiation exposure, the resulting hybrids gain a continuous dispersion by means of new chemical bonds. This type of compounds achieves some specific structural modifications in the polymer phase, becoming stable hybrid composites. The functional properties of hybrids definitely influence the material behavior due to the molecular changes based on the structural reasons. The radiolysis of the vulnerable component becomes an appropriate opportunity for the creation of new material with improved stability. The radiation treatment is a proper conversion procedure by which common mixtures may become continuously reorganized. This review presents several examples for the radiation modifications induced by radiation exposure that allow the compatibilization and binding of components as well as the creation of new structures with improved properties. This approach provides the reference patterns for the extension of radiation processing over the well-conducted adjustments of polymer composites, when certain material features are compulsorily required. From this review, several solutions for the adjustment of regular polymer composites into hybrid systems may become conceivable by the extended radiation processing.

8 July 2015 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
ICIlies Diana Carolina
Ilies Diana Carolina
TRTudor Roşu
Tudor Roşu

26 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Maria RâpăMaria Râpă
Maria Râpă
LSLaura Mihaela Stefan
Laura Mihaela Stefan
Traian ZaharescuTraian Zaharescu
Traian Zaharescu
SASeciu Ana-Maria
Seciu Ana-Maria
AȘAnca Andreea Șăulean
Anca Andreea Șăulean
CPCristian Predescu
Cristian Predescu
Bionanocomposites including poly(lactic acid) (PLA), collagen, and silver nanoparticles (AgNPs) were prepared as biocompatible and stable films. Thermal properties of the PLA-based bionanocomposites indicated an increase in the crystallinity of PLA plasticized due to a small quantity of AgNPs. The results on the stability study indicate the promising contribution of the AgNPs on the durability of PLA-based bionanocomposites. In vitro biocompatibility conducted on the mouse fibroblast cell line NCTC, clone 929, using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed high values of cell viability (>80%) after cell cultivation in the presence of bionanocomposite formulations for 48 h, while the percentages of lactate dehydrogenase (LDH) released in the culture medium were reduced (<15%), indicating no damages of the cell membranes. In addition, cell cycle analysis assessed by flow cytometry indicated that all tested bionanocomposites did not affect cell proliferation and maintained the normal growth rate of cells. The obtained results recommend the potential use of PLA-based bionanocomposites for biomedical coatings.