Life cycle assessment of a technology is the key to technological development in the context of sustainable development. Orchard waste has been identified as a potential source of bioplastics. The objective of this study was to conduct a life cycle assessment of two specific bioplastic materials, namely, L-polylactic acid (PLA) and poly(3-hydroxybutyrate) (PHB). Bioplastics, such as PLA acid and PHB, can be used as alternatives to conventional plastics due to their biodegradability and non-toxicity, both of which have the potential to replace conventional petroleum-based plastics. Polylactic acid was synthesized from orchard waste in a series of stages, including biomass processing, pretreatment for carbohydrate extraction, simultaneous saccharification and fermentation (SSF), and microwave polymerization. PHB, another biodegradable polymer, is produced by microorganisms through the fermentation of sugars obtained from the same biomass. Applied LCAs show that for PLA production, the stages having the greatest environmental impact are biomass processing, pretreatment, and the SSF process, and for PHB production, very energy-intensive stages significantly contributing to the environmental impacts are biomass processing and pretreatment stages. For both PLA and PHB, the initial stages of biomass processing and pretreatment are the most energy-intensive and significant contributors to CO₂ emissions.

The current study was conducted to assess the level and spatial distribution of metal pollution in surface water, soil, and sediment samples from the Arieș River basin, located in central Romania, an area impacted by various mining and industrial operations. Several pollution indices, spatial distributions, cluster analyses, principal component analyses, and heat maps were applied for evaluating the contamination level with Ni, Cu, Zn, Cd, Pb, Mn, As, and Hg in the area. Based on the results of the Heavy-Metal Pollution Index and of the Heavy-Metal Evaluation Index of the surface-water samples, the middle part of the Arieș River basin, near and downstream of the gold mine impoundment, was characterized by high pollution levels. The metal concentration was higher near the tailing impoundment, with increased levels of Cu, Ni, Zn, and Pb in the soil samples and As, Cd, Pb, Na, K, Ca, Mn, and Al in the sediment samples. Ca (23.7–219 mg/L), Mg (2.55–18.30 mg/L), K (0.64–14.70 mg/L), Al (0.06–22.80 mg/L), and Mn (0.03–22.40 mg/L) had the most remarkable spatial variation among the surface-water samples, while various metal contents fluctuated strongly among the sampling locations. Al varied from 743 to 19.8 mg/kg, Fe from 529 to 11.4 mg/kg, Ca from 2316 to 11.8 mg/kg, and Mg from 967 to 2547 mg/kg in the soil samples, and Al varied from 3106 to 8022 mg/kg, Fe from 314 to 5982 mg/kg, Ca from 1367 to 8308 mg/kg, and Mg from 412 to 1913 mg/kg in the sediment samples. The Potential Ecological Risk Index values for soil and sediments were in the orders Cu > Ni > Pb > Hg > Cr > As > Mn > Zn > Cd and As > Cu > Cr > Cd > Pb > Ni > Hg > Mn > Zn, respectively, and the highest values were found around the gold mine impoundment.

In rural areas without centralized water supply systems, inhabitants often use groundwater of unknown quality as drinking water, without understanding the possible negative consequences on their health. Karstic spring waters from Dobrogea region in Romania were assessed for their potential to be used as drinking water source, according to their quality and seasonal variation. The physico-chemical parameters of waters were compared with the guideline values for drinking water established by the World Health Organization and the Directive 98/83/EC. The nitrate and Cr concentrations exceeded the guideline value in the springs from Southern Dobrogea, but met the quality criteria in those from Northern Dobrogea, thus, to be used as drinking water, the karstic springs located in Southern Dobrogea require treatment for nitrates removal. Heavy metals pollution indices showed low to medium cumulative heavy metal pollution in all springs, while the human health risk assessment by oral exposure indicated possible noncarcinogenic risks of nitrates, both for adults and children in springs from South Dobrogea. A rigorous monitoring of the water quality before human consumption is recommended for all four studied water sources.

In recent years, membranes have found extensive applications, primarily in wastewater purification and food packaging. However, petroleum-based membranes can be detrimental to the environment. For this reason, extensive studies are being conducted to identify environmentally friendly substitutes for the materials used in membrane composition. Among these materials, polylactic acid (PLA) and poly(3-hydroxybutyrate) (PHB) are two bio-sourced and biodegradable polymers that can be derived from lignocellulosic waste. These polymers also possess suitable characteristics, such as thermal resistance and mechanical strength, which make them potential candidates for replacing conventional plastics. This study provides an overview of recent advances in the production of PLA and PHB, with a focus on their extraction from lignocellulosic biomass, as well as the recent applications of these two biodegradable polymers as sustainable materials in membrane manufacturing. The advantages and limitations of membranes produced from these materials are also summarized. Lastly, an analysis of future trends is provided concerning new sources, production possibilities, and potential applications in water treatment (mainly for metal ions separation), gas separation, oil–water separation, medical applications, drug release control, and food packaging.

In this paper, the production of a second-generation bioethanol from lignocellulosic vineyard cutting wastes was investigated in order to define the optimal operating conditions of the autohydrolysis pretreatment, chlorite delignification and simultaneous saccharification and fermentation (SSF). The autohydrolysis of vine-shoot wastes resulted in liquors containing mainly a mixture of monosaccharides, degradation products and spent solids (rich in cellulose and lignin), with potential utility in obtaining valuable chemicals and bioethanol. The autohydrolysis of the vine-shoot wastes was carried out at 165 and 180 °C for 10 min residence time, and the resulted solid and liquid phases composition were analysed. The resulted liquid fraction contained hemicellulosic sugars as a mixture of alpha (α) and beta (β) sugar anomers, and secondary by-products. The solid fraction was delignified using the sodium chlorite method for the separation of lignin and easier access of enzymes to the cellulosic sugars, and then, converted to ethanol by the SSF process. The maximum bioethanol production (6%) was obtained by autohydrolysis (165 °C), chlorite delignification and SSF process at 37 °C, 10% solid loading, 72 h. The principal component analysis was used to identify the main parameters that influence the chemical compositions of vine-shoot waste for different varieties.