A conceptual design study of small long-life nuclear power reactors used for a remote or isolated area has been performed. Lead as well as lead-bismuth is employed as the coolant, and both metallic and nitride fuels are investigated. There are some severe requirements on these reactors for operability, maintainability, safety, and proliferation resistance. Some important characteristics of the proposed designs [150 MW(thermal)] are the following: transportability between reactor factory and operation site; capability of long-life operation (12 yr) without refueling or fuel shuffling while maintaining burnup reactivity swing less than 0.1% Δk; negative total core coolant void coefficient of reactivity over all the burnup period; omission of intermediate heat exchanger; and a relatively large contribution of natural circulation.
Molten salt reactor (MSR) has many advantages such as safety improvement and ability for waste burning. In the present study, the use of plutonium and minor actinides (MA) in small MSRs with various powers and core sizes has been investigated. For the small MSRs with 50 MWth, 100 MWth, 150 MWth, 200 MWth, and 250 MWth of power output, the criticality condition can be achieved if the reactor grade plutonium and MA content in loaded fuel are 7.56%, 6.76%, 6.56%, 6.56%, and 6.56%, respectively. The plutonium and MA utilization in small MSR results in the hardening of neutron spectrum compared to that of the standard 25 MWth miniFUJI MSR with Th-233U fuel. Furthermore, the neutron spectra become harder with the augmenting of Pu and MA contents in loaded fuel as well as the increasing of the output power