Raghu Babu Uppara

Mr. Raghu Babu Uppara

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2020 in Anti-Corrosion Methods and Materials
Verified
Journal Article
Closed access
RURaghu Babu Uppara
Raghu Babu Uppara
KBKondraivendhan B.
Kondraivendhan B.
Purpose: Besides with a large amount of Na+and Cl−ions in seawater, the presence of Mg+2and SO4−2ions builds more complex corrosion mechanism. This paper aims to investigate the corrosion of embedded reinforcement in concrete with the environment of both Cl−and SO4−2anions associated Mg+2cation.Design/methodology/approach: The concrete specimens were prepared by using ordinary Portland cement (OPC), and OPC blended with metakaolin (MK) for water to cementitious material ratio (w/cm) 0.48 and 0.51. The concrete mixes were contaminated with the addition of MgCl2alone and combined MgCl2and MgSO4in mix water. Reinforcement corrosion was evaluated by half-cell potential and corrosion current densities (Icorr) at regular intervals. Moreover, the influence of cementitious material type, salt type and w/cm ratio on electrical resistivity of concrete was also investigated. The statistical models were developed for electrical resistivity as a function of calcium to aluminium content ratio, compressive strength, w/cm ratio and age of concrete.Findings: Although the corrosion initiation time increases in the concomitant presence of MgSO4and MgCl2as internal source compared to MgCl2, Icorrvalues are higher in both OPC and MK blended concrete. However, electrical resistivity decreased with addition of MgSO4. MK blended concrete performed better with increased resistivity, corrosion initiation time and decreased Icorrvalues.Originality/value: This study reports statistical distributions for scattered Icorrof rebar in different concrete mixtures. Stepwise regression models were developed for resistivity by considering the interactions among different variables, which would help to estimate the resistivity through basic information.

1 September 2020 in Innovative Infrastructure Solutions
Verified
Journal Article
Closed access
PDF file
RURaghu Babu Uppara
Raghu Babu Uppara
BKB. Kondraivendhan
B. Kondraivendhan

1 April 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
RURaghu Babu Uppara
Raghu Babu Uppara
BKB. Kondraivendhan
B. Kondraivendhan
The ohmic voltage drop (IR) due to the high resistivity of concrete needs to be considered while monitoring the corrosion performance of rebar embedded in concrete. It helps to evaluate the corrosion condition precisely. Concrete mixes were contaminated with chlorides, sulphates, and a combination of chloride plus sulphate solutions as mix water. To assess the IR drop error in corrosion measurements caused by concrete with different salts, linear polarization resistance values were measured with and without IR compensation. The results indicate that the concrete contaminated with 5% of chloride has shown higher error as compared to 2% of sulphates, due to high corrosion current density. However, from the results of chloride and chloride plus sulphate contaminated concrete, it is also confirmed that the IR drop error is not absolute to determine the solution resistance. The higher corrosion in chloride contaminated concrete as compared to chloride plus sulphate contaminated concrete is also observed due to the availability of high chloride concentration. The results of the present study are suggested that the IR drop compensation should be considered when the reinforced structures are exposed to chloride and sulphate environment.

1 January 2018 in Materials Today: Proceedings
Verified
Journal Article
Closed access
NVN. VenkataRamana
N. VenkataRamana
GBG. Reddy Babu
G. Reddy Babu
RURaghu Babu Uppara
Raghu Babu Uppara

1 October 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
RURaghu Babu Uppara
Raghu Babu Uppara
BKB Kondraivendhan
B Kondraivendhan
In this paper, electrochemical technique was employed to evaluate the performance of Red mud (RM) on the reinforcement corrosion. This paper also reports the effect of chloride, sulphate and the combined chloride-sulphate solutions on the corrosivity of rebar embedded in Ordinary Portland Cement (OPC) and RM blended concrete (95% OPC & 5% RM) slab specimens. The corrosion performance was evaluated by Linear polarisation resistance sweep test on the reinforced slab specimens made with mix water contaminated with 5% NaCl, 2% MgSO4 and the combination of both salts. The corrosion performance was monitored for every 30 days over a period of 180 days, in terms of corrosion rate values. In order to investigate the overall performance of experimental test results they were analysed as per the specifications given by ASTM G16-13. The analysis of the corrosion data includes the descriptive statistics of the Normal, Weibull lognormal, and Smallest Extreme Value probability distribution functions (Pdfs) and the test of fit significance by the Anderson-Darling (AD) goodness of fit statistics. In addition, the analysis of variance was also carried out to determine the influence of each variable on the corrosion data. Further, the analysis of variance is also carried out to evaluate the influence of cementitious material and type of salt on corrosion data.