In this study, compressive strength and flow behavior of fly ash incorporated cement paste and mortar were investigated. For this purpose, four water to binder ratios (w/(c+f)) such as 0.25, 0.35, 0.45 and 0.55 with three curing ages and five wide range of fly ash replacement levels (f/c ratio) namely 0, 0.1, 0.2, 0.3 and 0.4 were introduced in the experimental scheme. The workability of the mixture was ensured through Marsh cone and flow table tests for fly ash blended cement paste and mortar, respectively. The test result showed that compressive strength increases with age as expected in all cases and an empirical relationship for compressive strength of blended cement paste and mortar with mix factors such as w/(c+f) ratio, f/c ratio and age is also proposed. The estimated compressive strength versus w/(c+f) ratio curves for different curing ages and f/c ratios resembles the nature of Abrams’ strength versus w/c ratio curves
An alternative carbonation technique was studied with normal concrete (NC) and concrete blended with natural zeolite (ZC) samples under an artificial environment with the help of carbonated-water curing. The effect of carbonated-water curing on concrete mixes incorporating natural zeolite powder as a partial replacement for cement was examined in this study. Accelerated carbonation was carried out by immersing concrete specimens in a 0.352-M sodium bicarbonate solution. The experimental program consisted of the evaluation of compressive strength, pH profiling, measurement of carbonation depth, X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and chemical composition measurements in order to study the extent of carbonation. ZC specimens cured in carbonated water had higher compressive strength development, greater extent of formation, and lower pH values than concrete cured in normal water for same curing period. Results obtained from XRD, TGA, FTIR, and chemical composition measurements showed that the amount of calcium carbonate increased in the carbonated concrete, which is closely associated with carbonation.
18 September 2013 in Journal of Advanced Concrete Technology