This article analyzes the evolution and current trends in aerial robotic manipulation, comprising helicopters, conventional underactuated multirotors, and multidirectional thrust platforms equipped with a wide variety of robotic manipulators capable of physically interacting with the environment. It also covers cooperative aerial manipulation and interconnected actuated multibody designs. The review is completed with developments in teleoperation, perception, and planning. Finally, a new generation of aerial robotic manipulators is presented with our vision of the future.
2 July 2018 in IEEE/ASME Transactions on Mechatronics
We propose a novel aerial manipulation platform, ODAR (omni-directional aerial robot), which is capable of omni-directional wrench generation with opportunistically-distributed/aligned bi-directional rotors. To circumvent tight thrust margin and weight budget of currently available rotor and battery technologies, we propose a novel design optimization framework, which maximizes the minimum-guaranteed control force/torque for any attitude while incorporating such important and useful aspects as inter-rotor aero-interference, anisotropic task requirement, gravity compensation, etc. We also provide a closed-form solution of infinite-norm optimal control allocation to avoid rotor saturation with the tight thrust margin. Further, we elaborate the notion of ESC-induced singularity and devise a novel selective mapping algorithm to substantially subdue its destabilizing effect. Experiments are performed to validate the theory, which demonstrate such capabilities not possible with typical aerial manipulation systems: 1) separate translation and attitude control in SE(3); 2) hybrid pose/wrench control with downward force of 60N much larger than its own weight (2.6kg); and 3) peg-in-hole teleoperation with radial tolerance of 0.5mm.
We propose a novel robotic platform for aerial operation and manipulation, a spherically connected multiquadrotor (SmQ) platform, which consists of a rigid frame and multiple quadrotors that are connected to the frame via passive spherical joints and act as distributed rotating thrust generators to collectively propel the frame by adjusting their attitude and thrust force. Depending on the number of quadrotors and their configuration, this SmQ platform can fully (or partially) overcome the issues of underactuation of the standard multirotor drones for aerial operation/manipulation (e.g., body-tilting with sideway gust/force, dynamic interaction hard to attain, complicated arm-drone integration, etc.). We present the dynamics modeling of this SmQ platform system and establish the condition for its full actuation in SE(3). We also show how to address limited range of spherical joints and rotor saturations as a constrained optimization problem by noticing the similarity with the multifingered grasping problem under the friction-cone constraint. We then design and analyze feedback control laws for the S3Q and S2Q systems as a combination of high-level Lyapunov control design and low-level constrained optimization and show that the (fully actuated) S3Q system can assume any trajectory in SE(3), whereas the S2Q system in R 3 × S 2 with its unactuated dynamics is still internally stable. Experiments are also performed to show the efficacy of the theory.
This work proposes a novel precision motion control framework of robotized industrial hydraulic excavators via data-driven model inversion. Rather than employing a single neural network to approximate the whole excavator dynamics, including input delays and dead-zones, we construct a physics-inspired data-driven model with a modular structure. The data-driven model is then inverted in a modular fashion which benefits the training speed. The data-driven model and its inversion are trained offline in a supervised manner using the real operational data since online learning methods can damage the machine and surroundings. The entire motion control framework consists of the data-driven model inversion that compensates for the excavator dynamics and the proportional control that determines the input of the model inversion to enhance the robustness. The framework is experimentally validated with a commercial 38-ton class hydraulic excavator for digging and grading tasks, achieving a precise control performance (i.e., root-mean-square of the path following error under $2 \;[\rm cm]$) even under severe soil interactions.
Low-cost light scattering particulate matter (PM) sensors have been widely researched and deployed in order to overcome the limitations of low spatio-temporal resolution of government-operated beta attenuation monitor (BAM). However, the accuracy of low-cost sensors has been questioned, thus impeding their wide adoption in practice. To evaluate the accuracy of low-cost PM sensors in the field, a multi-sensor platform has been developed and co-located with BAM in Dongjak-gu, Seoul, Korea from 15 January 2019 to 4 September 2019. In this paper, a sample variation of low-cost sensors has been analyzed while using three commercial low-cost PM sensors. Influences on PM sensor by environmental conditions, such as humidity, temperature, and ambient light, have also been described. Based on this information, we developed a novel combined calibration algorithm, which selectively applies multiple calibration models and statistically reduces residuals, while using a prebuilt parameter lookup table where each cell records statistical parameters of each calibration model at current input parameters. As our proposed framework significantly improves the accuracy of the low-cost PM sensors (e.g., RMSE: 23.94 → 4.70 g/m ) and increases the correlation (e.g., R : 0.41 → 0.89), this calibration model can be transferred to all sensor nodes through the sensor network.