This work proposes a novel precision motion control framework of robotized industrial hydraulic excavators via data-driven model inversion. Rather than employing a single neural network to approximate the whole excavator dynamics, including input delays and dead-zones, we construct a physics-inspired data-driven model with a modular structure. The data-driven model is then inverted in a modular fashion which benefits the training speed. The data-driven model and its inversion are trained offline in a supervised manner using the real operational data since online learning methods can damage the machine and surroundings. The entire motion control framework consists of the data-driven model inversion that compensates for the excavator dynamics and the proportional control that determines the input of the model inversion to enhance the robustness. The framework is experimentally validated with a commercial 38-ton class hydraulic excavator for digging and grading tasks, achieving a precise control performance (i.e., root-mean-square of the path following error under $2 \;[\rm cm]$) even under severe soil interactions.
8 March 2021 in IEEE Robotics and Automation Letters
We propose a novel distributed control framework for teleoperated platooning of multiple three-dimensional (3D) fixed-wing unmanned aerial vehicles (UAVs), consisting of the following two layers: 1) virtual frame layer, which generates the target 3D nonholonomic motion of the virtual nonholonomic frames (VNFs) using the nonholonomic decomposition (D. J. Lee, 2010) and backstepping in such a way that the VNFs are to maintain the platoon formation in a distributed manner while respecting the directionality of the fixed-wing UAV; and 2) local control layer, which drives each fixed-wing UAV to track their respective VNF with their under-actuation and aerodynamic disturbance effects fully taken into account by using the backstepping and Lyapunov-based design techniques. Convergence and stability of salient aspects of each layer and their combination are theoretically established. Simulations with 25 fixed-wing UAVs and a haptic device are also performed to validate the theory with their multimedia provided at https://youtu.be/Z3Mo66KIsns.
10 February 2025 in IEEE Robotics and Automation Letters
We propose a novel real-time excavation trajectory modulation framework on a slope for an autonomous excavator with a low-level digital kinematic control as common for hydraulic industrial excavators. Excavation on a slope is challenging because of a higher risk of slips and rollovers. To deal with this, we propose a real-time excavation trajectory modulation framework based on slope tangential/normal force ratio $\mu$ and zero moment point $\xi$. The slip and rollover prevention conditions are incorporated in a single linear inequality using the same fractional structure in $\mu$ and $\xi$ with the common denominator. However, due to the adoption of the low-level digital kinematic control, this prevention requires the prediction of the excavation force at the next timestamp, and, for this, we develop a data-driven excavation force difference prediction model utilizing a deep learning architecture, Transformer. The remaining error of this prediction is then addressed by using the technique of robust optimization with box uncertainty of the developed excavation force difference model. Our proposed framework is validated experimentally with our customized scaled-down excavator.