Zhiyin Liu

Dr. Zhiyin Liu


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2018 in IEEE Access
Verified
Journal Article
Open access
WCWanke Cao
Wanke Cao
YWYingshuang Wu
Yingshuang Wu
Yuhua ChangYuhua Chang
Yuhua Chang
ZLZhiyin Liu
Zhiyin Liu
CLCheng Lin
Cheng Lin
ASAntoni Szumanowski
Antoni Szumanowski
This paper deals with the speed synchronization controller design for networked integrated motor-transmission (IMT) powertrains via controller area network (CAN). It is well known that, in current implementations, CAN has been widely used in the control system design of automotive powertrains. However, on the other hand, the application of CAN would not only lead to network-induced delays but also bring about protocol constrains, e.g., data package capability and utilization ratio limitation, which would deteriorate the system and make the controller design a challenging problem. This paper is to provide a co-design methodology that can cope with all these problems and ensure satisfactory control effect for the speed synchronization control of IMT powertrain systems. First, a networked IMT powertrain system using CAN as underlying network is presented and the dynamic model for the speed synchronization control is derived. Second, the network-induced delay model is introduced and improved considering data packet capability and utilization ratio limitation. The control-orient discrete-time model is also derived based on the improved delay model. Third, a co-design methodology using sliding mode controller and offline priority scheduling based on Lyapunov stability criterion is proposed. The results of simulations and tests show the effectiveness of the proposed co-design methodology.

22 January 2017 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
WCWanke Cao
Wanke Cao
ZLZhiyin Liu
Zhiyin Liu
Yuhua ChangYuhua Chang
Yuhua Chang
ASAntoni Szumanowski
Antoni Szumanowski
This paper investigates the robust direct yaw‐moment control (DYC) through parameter‐dependent fuzzy sliding mode control (SMC) approach for all‐wheel‐independent‐drive electric vehicles (AWID‐EVs) subject to network‐induced delays. AWID‐EVs have obvious advantages in terms of DYC over the traditional centralized‐drive vehicles. However it is one of the most principal issues for AWID‐EVs to ensure the robustness of DYC. Furthermore, the network‐induced delays would also reduce control performance of DYC and even deteriorate the EV system. To ensure robustness of DYC and deal with network‐induced delays, a parameter‐dependent fuzzy sliding mode control (FSMC) method based on the real‐time information of vehicle states and delays is proposed in this paper. The results of cosimulations with Simulink® and CarSim® demonstrate the effectiveness of the proposed controller. Moreover, the results of comparison with a conventional FSMC controller illustrate the strength of explicitly dealing with network‐induced delays.

18 October 2017 in Energies
Verified
Journal Article
Open access
PDF file
WCWanke Cao
Wanke Cao
HLHelin Liu
Helin Liu
CLCheng Lin
Cheng Lin
Yuhua ChangYuhua Chang
Yuhua Chang
ZLZhiyin Liu
Zhiyin Liu
ASAntoni Szumanowski
Antoni Szumanowski
All-wheel-independent-drive electric vehicles (AWID-EVs) have considerable advantages in terms of energy optimization, drivability and driving safety due to the remarkable actuation flexibility of electric motors. However, in their current implementations, various real-time data in the vehicle control system are exchanged via a controller area network (CAN), which causes network congestion and network-induced delays. These problems could lead to systemic instability and make the system integration difficult. The goal of this paper is to provide a design methodology that can cope with all these challenges for the lateral motion control of AWID-EVs. Firstly, a continuous-time model of an AWID-EV is derived. Then an expression for determining upper and lower bounds on the delays caused by CAN is presented and with which a discrete-time model of the closed-loop CAN system is derived. An expression on the bandwidth utilization is introduced as well. Thirdly, a co-design based scheme combining a period-dependent linear quadratic regulator (LQR) and a dynamic period scheduler is designed for the resulting model and the stability criterion is also derived. The results of simulations and hard-in-loop (HIL) experiments show that the proposed methodology can effectively guarantee the stability of the vehicle lateral motion control while obviously declining the network congestion.

10 November 2017 in Energies
Verified
Journal Article
Open access
PDF file
WCWanke Cao
Wanke Cao
HLHelin Liu
Helin Liu
CLCheng Lin
Cheng Lin
Yuhua ChangYuhua Chang
Yuhua Chang
ZLZhiyin Liu
Zhiyin Liu
ASAntoni Szumanowski
Antoni Szumanowski
This paper deals with the speed synchronization control of integrated motor–transmission (IMT) powertrain systems in pure electric vehicles (EVs) over a controller area network (CAN) subject to both network-induced delays and network congestion. A CAN has advantages over point-to-point communication; however, it imposes network-induced delays and network congestion into the control system, which can deteriorate the shifting quality and make system integration difficult. This paper presents a co-design scheme combining active period scheduling and discrete-time slip mode control (SMC) to deal with both network-induced delays and network congestion of the CAN, which improves the speed synchronization control for high shifting quality and prevents network congestion for the system’s integration. The results of simulations and hardware-in-loop experiments show the effectiveness of the proposed scheme, which can ensure satisfactory speed synchronization performance while significantly reducing the network’s utilization.

3 July 2018
Verified
Conference Paper
Open access
Artur KopczynskiArtur Kopczynski
Artur Kopczynski
ZLZhiyin Liu
Zhiyin Liu
PKPaweł Krawczyk
Paweł Krawczyk
The study of Li-ion battery based on laboratory tests was presented and analysed taking into consideration various aspects. The tests with different charging and discharging currents were carried out. Moreover, some additional tests with the use of temperature chamber were applied. The results derived from laboratory tests allowed to obtain the characteristics of the electromotive force of two types of Li-ion cylindrical cell batteries. Subsequently, the influence of temperature on battery useful capacity was analysed. Therefore, the characteristics of internal resistance for studied batteries were determined based on obtained results and according to battery non-linear modelling [1, 2]. Finally, the possibilities for further development of the presented research have been considered.

1 January 2018 in International Journal of Vehicle Design
Verified
Journal Article
Closed access
ASAntoni Szumanowski
Antoni Szumanowski
Yuhua ChangYuhua Chang
Yuhua Chang
ZLZhiyin Liu
Zhiyin Liu
PKPaweł Krawczyk
Paweł Krawczyk
This paper proposes a new type of hybrid powertrain with a specially designed double-clutch transmission. Compared with the existing hybrid powertrains, the proposed solution with double-clutch transmission, based on innovative double-clutch and mechanical gear sets, has the potential to achieve higher levels of performance efficiency at a lower production cost. The impact factors of system efficiency are analysed on a dynamic non-linear simulation model. The control strategies of powertrain and the double-clutch transmission gear ratios are studied by simulation results. Additionally, the double-clutch transmission can increase the efficiency of regenerative braking.