Present work illustrates synthesis of Cr doped WO3 nanostructures (NS) (2 wt. %, 4 wt. % and 6 wt. %) by co precipitation method using surfactants and reported enhanced impedance, capacitance-voltage and current-voltage (I-V) characteristics. NS were characterized by cyclic voltammetry (CV), scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-Visible (UV-Vis) spectroscopy, pelletized samples performed I-V, C-V and impedance measurements. Impedance results reveal that the pelletized samples of highest doped Cr showed remarkable increase in admittance with respect to the biased voltage. I-V characteristics of highest doped Cr exhibited enhanced surface conductivity as compared with applied current. The output power considerably increases for the 6 wt. % of Cr doped WO3 and doping percentage of Cr increases surface conductivity, power output, admittance considerably enhances in the material matrix. This work demonstrated that Cr doped WO3 has more sensitivity towards I-V, C-V and impedance value considerably varies with the applied bias voltage. The limitation is not certain in case of doped nanomaterials of Cr-WO3, since these materials possesses nonlinear properties and can find applications in the diversified filed of nano electronics. The authors reported work can be a key guide for the upcoming researchers in the area of biomedical devices, nanoelectronics, sensors, wherein Cr-WO3 NS finds applications because of its enhanced I-V, C-V, Impedance characteristics. The work has been carried out to understand the electrical and electronic properties of doped nanomaterials in the original work place and analysis has been carried out at various institutions where the provisions for the experimentation is being made.
In the present investigation Co doped Sm2O3 nanostructures (NS) with different concentrations (1%, 3% and 8%) synthesized by thermal decomposition and surface reduction methods using sodium hydroxide as precipitating agent. Flake-like shaped semiconductor crystal features, morphology, optical absorptivity, chemical composition determined by XRD (X-ray diffraction), SEM (scanning electron microscopy) and UV-Visible. Flake-like morphology of the NS observed in SEM analysis having grain size varies in between 80 and 96 nm. XRD pattern depicted mixed phase of cubic crystal structure with crystallite size lying between 36.8 and 29.9 nm. Red shift in the optical absorptivity was observed in the spectrum, and spectral shift from ultraviolet to visible region with optical band gap (Eg) value decreases from 4.33 to 2.01 eV. Upon excitation with ultraviolet radiation (excitation = 300 nm), NS showed red emission in all concentrations of Co dopant and maximal emission intensity appeared at 485.5 nm for 8% of Co dopant concentration. The NS finds prominent utility in the field of optoelectronics and photoelectronic applications.