The age of space electric propulsion arrived and found the space exploration endeavors at a paradigm shift in the context of new space. Mega-constellations of small satellites on low-Earth orbit (LEO) are proposed by many emerging commercial actors. Naturally, the boom in the small satellite market drives the necessity of propulsion systems that are both power and fuel efficient and accommodate small form-factors. Most of the existing electric propulsion technologies have reached the maturity level and can be the prime choices to enable mission versatility for small satellite platforms in Earth orbit and beyond. At the Plasma Sources and Applications Centre/Space Propulsion Centre (PSAC/SPC) Singapore, a continuous effort was dedicated to the development of low-power electric propulsion systems that can meet the small satellites market requirements. This review presents the recent progress in the field of electric propulsion at PSAC/SPC Singapore, from Hall thrusters and thermionic cathodes research to more ambitious devices such as the rotamak-like plasma thruster. On top of that, a review of the existing vacuum facilities and plasma diagnostics used for electric propulsion testing and characterization is included in the present research.
Thermionic cathodes are essential for the operation of various electrostatic propulsion devices. They strongly influence the performance and lifetime of the propulsion system. In this study, a 1 A-class LaB laboratory model hollow cathode has been tested with krypton in diode and triode configurations in order to assess the cathode discharge mode transition behavior. Measurements have been performed over a range of krypton mass flow rates (0.1, 0.15, and 0.21 mg/s, or 1.6, 2.4, and 3.4 sccm), keeper (0.1, 0.15, and 0.2 A), and anode currents (0.1–1 A) at a fixed cathode-to-anode distance. Seven criteria were used to distinguish between the spot and plume mode operations. The results show that the mode transition in low-current cathodes may be a nonlinear phenomenon, and only some of the existing mode transition criteria can be used to accurately predict the spot/plume discharge regions at low emission currents.
22 December 2017 in IEEE Transactions on Plasma Science
Microthrusters are used for microsatellites to provide precise motion control in space by applying very low thrust pulses, which must be properly calibrated on earth. The range of thrust levels required varies from one thruster to another, depending on its use. Thus, microthrusts that stand capable of reading thrusts of multiple ranges, depending on the configuration, are in demand. This paper discusses the features and the calibration method for a typical miniaturized thrust stand. This device is essentially a torsional pendulum whose sensitivity can be varied. As a source of torsion, a piece of wire is used. For the purpose of this paper, the thrust stand was configured to achieve a micro-Newton resolution.