Thermionic cathodes are essential for the operation of various electrostatic propulsion devices. They strongly influence the performance and lifetime of the propulsion system. In this study, a 1 A-class LaB laboratory model hollow cathode has been tested with krypton in diode and triode configurations in order to assess the cathode discharge mode transition behavior. Measurements have been performed over a range of krypton mass flow rates (0.1, 0.15, and 0.21 mg/s, or 1.6, 2.4, and 3.4 sccm), keeper (0.1, 0.15, and 0.2 A), and anode currents (0.1–1 A) at a fixed cathode-to-anode distance. Seven criteria were used to distinguish between the spot and plume mode operations. The results show that the mode transition in low-current cathodes may be a nonlinear phenomenon, and only some of the existing mode transition criteria can be used to accurately predict the spot/plume discharge regions at low emission currents.
Noise suppression is of great significance in high-precision micro thrust calibration and measurement. Existing methods cannot simultaneously recover both the nonlinear transitions (generated by thrust) and smooth trends of the signals. Additionally, they exhibit poor robustness to noise model changes. To address the issues, in this research we propose a novel self-supervised contrastive denoising autoencoder (SCDAE) model. The SCDAE features end-to-end signal denoising based on a multi-task joint learning framework combining contrastive representation learning and denoising autoencoder (DAE) without the need for a clean signal reference. Specifically, SCDAE consists of a representation learner (RPL) and a denoising learner (DEL). In addition, considering the multi-staircase property of the measurement signal, a novel parallel hybrid data augmentation strategy is designed in the RPL to create positive sample pairs and greatly force the network to extract robust content-invariant and disentangled features. Besides, in order to solve the blindness of training target creation for the DEL, a new training target creation strategy is proposed based on the variational mode decomposition (VMD). An attention module is introduced to adaptively reinforce the content-invariant disentangled features from the RPL, guiding the DEL to generate the essential dynamic nature from the raw input signal, thus suppressing noise information. Extensive simulations and experimental case study were carried out to demonstrate the effectiveness and advancement of the proposed method in recovering signal details (nonlinear transitions and smooth trends) with comparison to existing classical methods.
21 August 2023 in IEEE Transactions on Instrumentation and Measurement
Micro-Newton thrusters are widely utilized in the field of astronautics. Typically, micro-newton thrust signal processing aims at the restoration of piecewise constant signals. Improving the amplitude accuracy of the denoised signal remains a major difficulty. In this research, we proposed a new nonlinear total variation denoising (TVD) algorithm with an adjustable majorization-minimization (MM) upper bound function for optimizing the iterative solution process of TVD. The influences of the upper bound function of the TVD on denoising are analyzed in detail. It is demonstrated that the proposed aTVD method shows extraordinary robustness for denoising signals with different noise levels. In addition, this algorithm can also adjust the sensitivity of the jumps in signals for optimized amplitude accuracy effectively. Numerical examples show that the proposed method has 40.4% and 18.2% accuracy improvement over conventional TVD using traditional quadratic upper bound and enhanced TVD using exponential upper bound function. Moreover, the advantages of the proposed method are validated in an experiment of measured thrust signal processing. The proposed method can be further adopted to improve the performance of signal denoising algorithms developed from the TVD method.
Operation of closed drift thruster (CDT) relies mainly on neutral gas, whose trajectory and distribution in the flow field have a significant influence on performance. Neutral flow dynamics (NFD), also known as the dynamics of the neutral gas in the thruster, has received increased attention from researchers over the past century, drawing attention to its significant influence on CDT. This article will therefore review the most recent research on NFD in CDT. At the outset of the review, we will provide a quick overview of how the CDT works and the influence of NFD on its performance, focusing on the effect on the CDT’s discharge characteristics and discharge oscillations. The effect of the gas distributor and discharge channel layout on the performance of the CDT and NFD is highlighted in the major portion of the article. Following that, we provide an overview of typical NFD detection techniques. Additional sub-categories of work are provided outside of the main portion, including usual work on neutral gas and gas distributor temperatures, neutral gas distribution uniformity, and neutral gas types.