This paper develops the dynamic response of a hydrolic-transmission system of wave-power devices under random wave conditions. Through theoretical calculation and experiment analysis, the mathematical model of the hydrolic-transmission system was built to make clear which parameters are related to electric-energy output. The working characteristics of the main parameters are developed through the designed experimental platform. The charging pressure of the accumulator, which affects the rigidity of the hydrolic-transmission system, is analyzed. The throttle valve opening and symmetrical electric loads, which affect the stability and efficiency of the electric energy output, are analyzed. Thus, the energy output curve under different parameter regulations is drawn. Through the orthogonal experimental method, the law curve is further modified, the design principle of hydraulic system parameters under the sea level condition is established, and the optimal design scheme and regulation strategy to the hydraulic conversion system of the power generation device is obtained, to solve the problem that the multiparameter coupling cannot be adjusted quickly and effectively. The energy regulation response mechanism of the hydrolic-transmission system in the wave energy power-generation system is proved.

Given the influence of flow instability, parameter uncertainty, and unpredictable disturbances in electro-hydraulic lifting systems, high-precision position control for electro-hydraulic lifting systems is challenging to achieve. This study proposes an observer–sliding mode control strategy to improve the control accuracy of the tractor electro-hydraulic lifting system. Firstly, the principle of the electro-hydraulic hoisting system is analyzed. Secondly, a mathematical model of the electro-hydraulic hoisting system is established, and the electro-hydraulic hoisting system is reduced to design an observer to achieve a real-time evaluation of the unknown system state and disturbance. The observer and the sliding mode control are then integrated into a controller to improve system response. Theoretical analysis demonstrates that the controller ensures that the actuator can achieve the desired control effect even under disturbing effects. Finally, a joint AMESim–MATLAB simulation and conducting pilot studies are carried out to compare the observer–sliding mode control with PID (Proportion–Integral–Derivative) control and sliding mode control. At the same time, in the process of the simulation and test, the symmetric structure as the electro-hydraulic lifting system was used to build a ploughing depth simulation system (changes in the hydraulic cylinder thrust simulate changes in ploughing depth values). The results show that the proposed observer–sliding mode control strategy can achieve a better position and pressure tracking and parameter change robustness than PID control and sliding mode control.

The wave energy converter captures the wave power by buoy’s heaving motion, transfers it by hydraulic system, and converts it into the electric power by generator. The hydraulic conversion system plays an important role that can realize the effective regulation of the output power. In order to develop the working characteristics of the hydraulic transmission system, a new wave energy experimental platform was devised. The platform adopts the matching design mode of the driving oil cylinder and the driven oil cylinder. The active hydraulic cylinder and the clump weight can simulate the movement of the oscillating float under certain sea conditions, and the driven oil cylinder realizes the conversion and the output of wave energy. In order to improve the operation accuracy of the active hydraulic cylinder, the control strategy of the active hydraulic cylinder was studied. An adaptive sliding mode control strategy based on the back-stepping method was proposed to overcome the influence of the parameter uncertainty in state equation. The adaptive law was designed by Lyapunov criterion to ensure the stability and the convergence of the closed-loop system. The proposed control strategy was verified and compared with proportional integral derivative control strategy through the concrete experiment, which shows the rapidity and the stability of it. The hydraulic transmission system of wave energy converter was developed; at the same time, the characteristics of hydraulic regulation under different working conditions were summarized through experiments. The results of the research could be the guidance for the power control design.