Bao The Nguyen

Prof. Dr. Bao The Nguyen

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MNMinh-Hieu Ngo
Minh-Hieu Ngo
Hay NguyenHay Nguyen
Hay Nguyen
BNBao The Nguyen
Bao The Nguyen
DLDat Thanh Le
Dat Thanh Le
QLquang huy le
quang huy le
The main purpose of this study was to select the appropriate ultrasound parameters that support the freezing process of Bo Chinh ginseng. This process involves placing Bo Chinh ginseng in an open-air environment and ensuring that the transducer does not come into contact with the material. The research results show that the ultrasound power, ultrasound irradiation temperature and intermittency ratio all affect the freezing time, nucleation temperature, color and microstructure of the materials. When the ultrasound continuously operated during the freezing process, at a frequency of 20 kHz, there was a 29.1% reduction in the freezing time at a power level of 100 W as compared to freezing without the help of ultrasound irradiation. The irradiation temperature and nucleation temperature have a linear relationship (y=−0.35x−0.93) which can help to control the nucleation temperature, thereby changing the ice crystal size. Ultrasound-assisted freezing at a 0.6 intermittency ratio had the shortest freezing time. The microstructure of the material changed after ultrasound-assisted freezing and many microchannels and holes were generated. When frozen at a wave rate of 0.4, the microchannels that were created in the material effectively supported the process of water drainage in the drying sublimation stage. At the same time, ultrasound irradiation did not affect the color of the post-freezing material when compared to the color of the frozen material that did not undergo ultrasound irradiation.

19 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
VHViet Van Hoang
Viet Van Hoang
HLHiep Chi Le
Hiep Chi Le
BNBao The Nguyen
Bao The Nguyen
In order to objectively reflect the energy utilization performance of an active water heating system (AWHS) using photovoltaic/thermal (PV/T) modules, this study proposes a new evaluation method based on energy efficiency, exergy efficiency and thermal-electrical output of a system in year-round weather conditions. Four samples of PV/T modules were surveyed to compare and evaluate the effectiveness of the system, called MD1, MD2, MD3 and MD4, respectively. The simulation program was developed to suit four types of PV/T modules and MATLAB was used as the programming language. The water flow through the four PV/T module samples and the hot water tank volume were investigated for the highest exergy efficiency of the system. The final results illustrate that in the weather conditions of Ho Chi Minh City, Vietnam, the system has the highest energy efficiency, exergy efficiency and thermal output when using MD1 with 57.85%, 15.67% and 2.93 kWh/m2/day, respectively, while the system has highest electrical output when using MD3 with 0.8 kWh/m2/day. In addition, under stable conditions ignoring heat loss, MD1 has the highest thermal efficiency with 54.85% and MD3 type has the highest electrical efficiency with 13.67%.

20 July 2023 in Energies
Verified
Journal Article
Open access
PDF file
DLDang Huy Le
Dang Huy Le
BNBao The Nguyen
Bao The Nguyen
VNVan Minh Ngo
Van Minh Ngo
This paper publishes the experimental performance results of a novel small dual−stage wind turbine at different speeds under wind tunnel testing. The results confirm its superiority at low wind speeds <7 m/s, which is consistent with natural wind conditions in most countries around the world. At lower wind speeds, the efficiency of the small, dual−stage wind turbine is higher than that of a conventional single−stage turbine. At wind speeds of <6 m/s, the novel dual−stage wind turbine always produces approximately 2.5 times more power than a single−stage wind turbine; the power coefficient is greater than 0.4. Thanks to this feature, the novel small, dual−stage wind turbine is effective in practical applications. For windy areas in Vietnam, the power generated over the same amount of time by the novel dual−stage wind turbine can be more than double that of a single−stage turbine. Next, a standard CFD model is established and validated with the above experimental measurements. This method ensures the objectivity and authenticity of the computational model. This standard CFD model is applicable to a horizontal double−stage wind turbine with any configuration and blade profile. The URANS simulation method, which uses sliding meshes and the k−omega SST turbulence model, was implemented with rotational domains of the minimum thicknesses of rotational domains (in this paper, 0.09Rfront and 0.06Rrear, accordingly). This method predicts higher mechanical work for the turbine than the actual value by an interval of <10% in the same speed range as in the experiment. This is an acceptable deviation.

1 June 2022
Verified
Book Chapter
Closed access
PDF file
BNBao The Nguyen
Bao The Nguyen
MNMinh Van Ngo
Minh Van Ngo
HNHuy Gia Ngo
Huy Gia Ngo

1 January 2022 in Science & Technology Development Journal - Engineering and Technology
Verified
Journal Article
Open access
PDF file
HHHuy Đăng Hồ
Huy Đăng Hồ
VHViết Văn Hoàng
Viết Văn Hoàng
BNBao The Nguyen
Bao The Nguyen
A simulation program combined with experiment for hot water supply system using PV/T collector combined with Single Basin solar still is introduced in this paper. PV/T collector is known as a thermal - electrical co-generation device. Besides the ability to generate electricity, it also generates heat to heat water, serving water distillation at night. This combination not only helps to increase the electrical capacity of the solar cells, but also helps to increase the total distillation output of the day and night for the Single Basin solar still. Based on the energy balance equations at the components of the PV/T collector, the hot water tank and the components of the Single Basin solar still, a simulation program is set up using the MATLAB programming language with the Simulink tool. The simulation results are verified experimentally with high accuracy from 4.24% to 7.11%. The article demonstrates that the electrical capacity of solar cells increased by 8.6%, the average electrical efficiency and average energy efficiency of PV/T collector reached 15.1% and 36.2%, respectively. Besides, the distilled water output in one day increased by an average of 38.2% compared to the traditional Single Basin water distillation equipment. The simulation program in this study can be applied in different weather conditions, saving time and money for the implementation of projects combining PV/T collector and Single Basin solar still for arid localities and remote islands.

11 June 2025 in International Journal of Air-Conditioning and Refrigeration
Verified
Journal Article
Open access
PDF file
DLDang Huy Le
Dang Huy Le
BNBao The Nguyen
Bao The Nguyen
VNVan Minh Ngo
Van Minh Ngo
Blade element momentum theory continues to be widely used in the wind industry to calculate and analyze wind turbines. This theory has been improved many times to address its inherent weakness of convergence capability. This article applies the one variable BEM method, which has been further improved to help ensure convergence to apply analytical calculations for small horizontal-axis straight-blade wind turbines. This type of turbine has much potential for practical applications, providing electricity to households and residential areas far from cities, but has not been fully researched. Straight-blade turbines with relatively large Re changes in blade spanwise direction often cause difficulties in the convergence of BEM algorithms. This article presents the ability to apply improved BEM theory to straight-blade wind turbines in the wind speed range from 5 to 7 m/s and tip speed ratio from 4 to 7 through analytical calculations. A well-validated CFD model was also performed to evaluate the reliability of the calculation method. The obtained results show that the improved BEM method can be applied to calculate the mechanical power output of straight-blade turbines with errors of less than 10% compared to reality. This thereby proves the applicability of the improved BEM method to solve practical problems of small wind turbines.