In order to objectively reflect the energy utilization performance of an active water heating system (AWHS) using photovoltaic/thermal (PV/T) modules, this study proposes a new evaluation method based on energy efficiency, exergy efficiency and thermal-electrical output of a system in year-round weather conditions. Four samples of PV/T modules were surveyed to compare and evaluate the effectiveness of the system, called MD1, MD2, MD3 and MD4, respectively. The simulation program was developed to suit four types of PV/T modules and MATLAB was used as the programming language. The water flow through the four PV/T module samples and the hot water tank volume were investigated for the highest exergy efficiency of the system. The final results illustrate that in the weather conditions of Ho Chi Minh City, Vietnam, the system has the highest energy efficiency, exergy efficiency and thermal output when using MD1 with 57.85%, 15.67% and 2.93 kWh/m2/day, respectively, while the system has highest electrical output when using MD3 with 0.8 kWh/m2/day. In addition, under stable conditions ignoring heat loss, MD1 has the highest thermal efficiency with 54.85% and MD3 type has the highest electrical efficiency with 13.67%.
1 January 2020 in International Journal of Renewable Energy Research
The purpose of this study is to work out a model to generate the sequences of daily and hourly solar radiation in tropical countries that are very important to calculate or simulate any solar thermal or electrical systems. In this study, the modified Aguiar’s model is firstly used to generate daily clearness index series for Ho Chi Minh City and Da Nang, two cities presenting for two climate types in tropical region. Then a modified model of Graham is proposed to generate hourly clearness index sequences from generate daily clearness index series for these two locations. Two modified models prove to be more accurate in predicting daily and hourly clearness index values in comparison with Aguiar’s and Graham’s model, respectively.   Especially, the model to generate the sequences of hourly kt values proposed in this study is much simpler in comparison to the original model of Graham.  Therefore, both proposed models in this work are expected to be used to generate daily and hourly solar radiation sequences for any locations in tropical regions because they do not need to use any location-dependent parameters.